Coaster 306128TB1 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
306128T (B1&B2)
Twin Platform Bed
COASTERFURNITURE.COM
REVISION 0 : 03/02/2022
PAGE 1 OF 4

Z-B2 (BOX2) - HARDWARE PACK IS LOCATED IN 306128T (B2)
HARDWARE IDENTIFICATION
PAGE 2 OF 4
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ASSEMBLY INSTRUCTIONS
ITEM: 306128T (B1&B2)
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY TIPS:
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 10 MINUTES
PARTS IDENTIFICATION
B1 (BOX 1)
1PC
AHEADBOARD 1PC
B FOOTBOARD
B2 (BOX 2)
CBED RAIL 2PCS D1SET
ROLL SLAT
(13PCS)
COASTERFURNITURE.COM
18PCS
THREADED BOLT
2
3
41PC
58PCS
HEX NUT
WRENCH
8PCS
8PCS
FLAT WASHER
(5/16 x 90mm - RBW)
(5/16 x 12mm - RBW)
(8 x16 x 1.5mm - RBW)
(12mm - RBW)
FLAT HEAD SCREW
(4 x 30mm - RBW)

PAGE 3 OF 4
ASSEMBLY INSTRUCTIONS
ITEM: 306128T (B1&B2)
STEP 1
STEP 2
COASTERFURNITURE.COM
A
C
C
B
32
4
1
D
5

PAGE 4 OF 4
ASSEMBLY INSTRUCTIONS
ITEM: 306128T (B1&B2)
COMPLETE
COASTERFURNITURE.COM
STEP 3

ITEM: 306128T (B1&B2)
COASTERFURNITURE.COM
Inner Size: 40.50"W X 76.00"D
11.50"
14.25"
8.25"
77.00"
40.25"
80.00" 42.75"
39.25"
Note: Dimension tolerance ±5%