Coaster 107829 User manual

REVISION 0 : 11/06/2018
REVISION 1 : 12/19/2018
PAGE 1 OF 3
107829
COUNTER HEIGHT CHAIR
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com

ASSEMBLY INSTRUCTIONS
PARTS IDENTIFICATION HARDWARE IDENTIFICATION
QTY QTY
www.coastercompany.com
ITEM : 107829
ASSEMBLY TIME 20 MINUTES
PART NAME FIGURE HARDWARE NAME FIGURE
ABACK FRAME 1PC 1ALLEN WRENCH
4PCS
(Ф4/17'' x 2-4/11'' - RBW)
1PC
(4MM - BLK)
BSEAT CUSHION 1PC 2SHORT BOLT 2PCS
(Ф4/17'' x 1-4/7''- RBW)
CSEAT FRAME 1PC 3MEDIUM BOLT
10PCS
(Ф4/17'' - RBW)
DLEFT FRONT
LEG 1PC 4LONG BOLT 4PCS
(Ф4/17'' x 2-3/4'' - RBW)
ERIGHT FRONT
LEG 1PC 5LOCK WASHER
5PCS
(Ф3/19'' x 1'' - RBW)
FLEFT SIDE
STRETCHER 1PC 6FLAT WASHER 10PCS
(Ф4/17'' - RBW)
GRIGHT SIDE
STRETCHER 1PC 7
SHORT FLAT HEAD
SCREW
NOTE : QUANTITIES SHOWN ARE FOR ONE CHAIR
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
PAGE 2 OF 3
HFRONT
STRETCHER 1PC 8
LONG FLAT HEAD
SCREW 6PCS
(Ф3/19'' x 1-1/2'' - RBW)
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
!Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.

ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
STEP 3 STEP 4
COMPLETE
www.coastercompany.com
ITEM : 107829
PAGE 3 OF 3