Coaster 150041 User manual

REVISION 2 : 05/25/2012

Flip table over using two people to lift and flip this table.
Insert left and right stretchers to back and front legs. Align
and fasten side rails to chair back legs using bolt and small
lock washer and tighten with Allen wrench. Insert long
screws into bottom of stretchers and tighten with screw driver
(Not provided).
ASSEMBLY INSTRUCTIONS
BOTTOM VIEW
8
STEP 5
H
PAGE 3 OF 3
Complete.
STEP 6
GF
Align and fasten side rail to front leg frame using bolt and
small lock washer and tighten with Allen wrench.
E
STEP 3
E
D
2
7
6
5
B
431
STEP 4
C
A
B
150041
ITEM :
STEP 1 STEP 2
www.coastercompany.com
6
7
2
Place table top up side down on soft surface, then align and
fasten all legs to table top using hex bolt, large lock washer
and flat washer and tighten with wrench.
Align and fasten cushion seat to side rails using short screws
and tighten with screw driver (Not provided).
BOTTOM VIEW
BOTTOM VIEW
9
9