Coaster 223391Q B1 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
Queen
Bed
223391Q(B1-B3)
PAGE 1 OF 6
REVISION 0 : 05/30/2022
COASTERFURNITURE.COM
REVISION 1 : 10/10/2022
REVISION 2 : 09/21/2023

ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
B1 (BOX 1)
AHEADBOARD
PANEL 1PC BHEADBOARD BOTTOM
RAIL
1PC
CRIGHT
HEADBOARD LEG
B2 (BOX 2)
E FOOTBOARD 1PC F
HB
223391Q(B1)
FROM BOX 1
HEADBOARD
COMPLETE
1PC
COASTERFURNITURE.COM
PAGE 2 OF 6
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
30 MINUTES
ITEM: 223391Q(B1-B3)
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
NOTE:
FB FOOTBOARD
1PC
223391Q(B2)
FROM BOX 2
1PC
RIGHT
B3 (BOX 3)
BED RAIL 2PCS
HCENTER RAIL SUPPORT
WITH LEVELER 3PCS
ROLL SLAT
(11PCS) 1SET
I
CENTER RAIL 1PC
J
G1PC
LEFT
K
1PC DLEFT
HEADBOARD LEG 1PC
FOOTBOARD LEG
FOOTBOARD LEG

1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 223391Q(B1)
1BOLT
(∅5/16" x 45MM- RBW) 10PCS 2 LOCK WASHER (∅5/16" - RBW) 10PCS
3FLAT WASHER
(∅5/16" - RBW) 10PCS 4 ALLEN WRENCH (4MM - RBW) 1PC
NOTE:
COASTERFURNITURE.COM
PAGE 3 OF 6
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ITEM: 223391Q(B1-B3)
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 223391Q(B2)
BOLT
(∅5/16" x 55MM- RBW) 4PCS 6 LOCK WASHER (∅5/16" - RBW) 4PCS
FLAT WASHER
(∅5/16" - RBW) 4PCS 8 ALLEN WRENCH (4MM - RBW) 1PC
Z-B3 (BOX 3) - HARDWARE PACK IS LOCATED IN 223391Q(B3)
5
7
THREADED BOLT
(∅5/16" x 90MM - RBW) 8PCS
HEX NUT
(∅5/16" x 14MM - RBW)
8PCS
WRENCH
(14MM - RBW) 1PC
HALF ROUND NUT
(∅5/16'' - RBW)
8PCS
FLAT HEAD SCREW
(∅4 x 30MM - RBW) 12PCS
9
11
10
12
13

ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
PAGE 4 OF 6
ITEM: 223391Q(B1-B3)
STEP 1
STEP 2
7
6
1
3
2
4
A
D
B
1
3
2
4
C
EE
F
G
5
8

ASSEMBLY INSTRUCTIONS
STEP 3
ITEM: 223391Q(B1-B3)
K
9
10 11
12
E
D
C
STEP 4
J
H
H
I

ASSEMBLY INSTRUCTIONS
STEP 5
STEP 6
COASTERFURNITURE.COM
PAGE 6 OF 6
ITEM: 223391Q(B1-B3)
COMPLETE
13
J
K
J
13
J
13

ITEM:223391Q(B1-B3)
Inner Size : 81.50''W X 61.00''D
61.00''
26.50''
8.25''
58.25''
8.75''
59.25''
64.50''
81.50''
88.00''
Note: Dimension tolerance ±5%
COASTERFURNITURE.COM
5.50''
7.50''
64.00''