Coaster CALIFORNIA 300643KW User manual

300643KW (B1 - B3)
CALIFORNIA KING BED
ASSEMBLY INSTRUCTIONS
www.coastercompany.com
COASTER FINE FURNITURE
REVISION 1: 08/14/2018
REVISION 0: 01/17/2017
PAGE 1 OF 8

ASSEMBLY INSTRUCTIONS
B1 (BOX 1 )
B2 (BOX 2 )
B3 (BOX 3 )
2PCS
EWING SUPPORT 2PCS
FIGURE QTY
HEADBOARD PANEL
HEADBOARD LEG
1PC
ITEM : 300643KW (B1 - B3)
PARTS IDENTIFICATION
PART NAME
PAGE 2 OF 8
DWING
B
CHEADBOARD SUPPORT 1PC
PANEL
ASSEMBLY TIME 40 MINUTES
A
2PCS
GBED RAIL 2PCS
FFOOTBOARD 1PC
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
!Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
www.coastercompany.com

ASSEMBLY INSTRUCTIONS
ITEM : 300643KW (B1 - B3)
PARTS IDENTIFICATION
PART NAME FIGURE QTY
HBED SLAT WITHOUT 10PCS
IBED SLAT WITH 3PCS
HOLES
JBED SLAT SUPPORT 6PCS
KFOOTBOARD LEG 2PCS
LCENTER RAIL 2PCS
300643KW (B1)
MCENTER RAIL SUPPORT 2PCS
1PC
WING COMPLETE
ER 300643KW (B2) 2PCS
PAGE 3 OF 8
HOLE
HB
FROM BOX 1
HEADBOARD COMPLETE
FROM BOX 2
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
!Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
www.coastercompany.com

ASSEMBLY INSTRUCTIONS
(Φ6 - BLK)
2BOLT 1 4PCS
(Φ6 x 30mm - RBW)
Z-B3 (BOX 3) - HARDWARE PACK IS LOCATED IN 300643KW(B3)
BOLT 3 10PCS
ITEM : 300643KW (B1 - B3)
HARDWARE NAME FIGURE QTY
1ALLEN WRENCH 1PC
8PCS
(Φ6 x 90mm - RBW)
6SHORT FLAT HEAD SCREW
3BOLT 2 12PCS
(Φ6 x 45mm - RBW)
4
(Φ3/8 x 25 x 1 - RBW)
7MEDIUM FLAT HEAD SCREW 28PCS
8LONG FLAT HEAD SCREW 4PCS
HARDWARE IDENTIFICATION
(Φ4 x 15mm - RBW)
(Φ4 x 32mm - RBW)
(Φ4 x 45mm - RBW)
9BIG FLAT WASHER 24PCS
(Φ6 x 60mm - RBW)
5BOLT 4
SMALL FLAT WASHER
11 4PCS
10 MEDIUM FLAT WASHER 24PCS
(Φ7 x 19 x 2 - RBW)
(Φ6 x 13 x 1 - RBW)
12 LOCK WASHER 24PCS
(Φ6 - RBW)
PAGE 4 OF 8
13 6PCS
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
!
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
www.coastercompany.com
LEVELER
(M6 x 23mm - RBW)
4PCS

ASSEMBLY INSTRUCTIONS
300643KE (B1) - BOX 1
STEP 1
STEP 2
STEP 3
ITEM :
300643KW (B1 - B3)
PAGE 5 OF 8
www.coastercompany.com

ASSEMBLY INSTRUCTIONS
300643KW (B1 & B2) - BOX 1 & BOX 2
STEP 4
300643KW (B3) - BOX 3
STEP 5
300643KW (B1 - B3) - BOX 1 TO BOX 3
STEP 6
ITEM :
300643KW (B1 - B3)
PAGE 6 OF 8
www.coastercompany.com

ASSEMBLY INSTRUCTIONS
STEP 7
STEP 8
STEP 9
ITEM :
300643KW (B1 - B3)
PAGE 7 OF 8
www.coastercompany.com

ASSEMBLY INSTRUCTIONS
STEP 10
STEP 11
ITEM :
300643KW (B1 - B3)
PAGE 8 OF 8
COMPLETE
www.coastercompany.com