Coaster 300837 User manual

300837
Daybed
COASTERFURNITURE.COM
PAGE 1 OF 4
REVISION 0 : 10/25/2023
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life

ROLL SLAT (14PCS)
HARDWARE IDENTIFICATION
4PCS
3
2
10PCS
41PC
4PCS
BED RAIL
ASSEMBLY TIME
PARTS IDENTIFICATION
30 MINUTES
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ITEM:300837
PAGE 2 OF 4COASTERFURNITURE.COM
NOTE:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
A
C
D
E
B1PC
1PC
1PC
1SET
1PC
BACK PANEL
RIGHT SIDE PANEL
LEFT SIDE PANEL
1BOLT
(Φ1/4x 100MM - WHT)
HEX HEAD SCREW
(Φ5/16x 80MM- WHT)
FLAT HEAD SCREW
(Φ4 x 35MM - WHT)
ALLEN WRENCH
(Φ4 x 78MM - WHT)

PAGE 3 OF 6 COASTERFURNITURE.COM
STEP 1
ASSEMBLY INSTRUCTIONS
STEP 2
ITEM: 300837
C
AB
42
D
41

PAGE 4 OF 6 COASTERFURNITURE.COM
STEP 3
ASSEMBLY INSTRUCTIONS
3
E
Before
After
STEP 4
COMPLETE
ITEM: 300837

Note: Dimension Tolerance ± 5%
Inner Size : 75.00"W x 39.00"D
83.00" 39.75"
42.75"
37.50"
35.75"
98.25"
30.25"
79.75"
11.75"
11.75"
75.00"
12.00"
39.00"
ITEM:300837
31.25"
9.50"
2.75"
14.25"
COASTERFURNITURE.COM