Coaster 224462 User manual

COASTERFURNITURE.COM
Fine Furniture for every stage of life
PAGE 1 OF 3
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
224462
Nightstand
REVISION 0 : 07/01/2022

WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitle for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
FURNITURE TIPING RESTRAINT
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1
Attach a bracket securely to the back top rail of the
dresser using short screw provided, through the
smaller hole.
STEP 2
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of dresser. Attached to the wall
stud using the long screw provided, through the
smaller hole.
WALL
STEP 3
Place the nightstand into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed. Confirm that the strap is
securely laced and locked.
WALL
PAGE 2 OF 3 COASTERFURNITURE.COM
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
ITEM: 224462

COASTERFURNITURE.COM
Note: Dimension tolerance ±5%
ITEM: 224462
2.75"
18.25"
16.75" 30.00"
14.00"
7.00''
25.25"
21.00"W X 12.75"D X 4.25"H X 0.25"T
24.25"
28.25"
Inner Size of Drawer :
Dimension tolerance ±5%