Coaster 130059 User manual

1 of 4 2014/05/28
24” BAR STOOL
130059
www.coastercompany.com
ASSEMBLY INSTRUCTION
COASTER FINE FURNITURE

ASSEMBLY INSTRUCTIONITEM: 130059
2 of 4 www.coastercompany.com
Assembly Instruction
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast and easy
assembly.
Warning!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishment.
A
B
E
G
F
C
PARTS IDENTIFICATION
HARDWARE PACKAGE
1
1
1
1
1
1
1
QTY.DESCRIPTION
A
B
C
D
E
F
G
BACK REST
FRONT LEFT LEG
FRONT RIGHT LEG
SEAT
FRONT STRETCHER
LEFT STRETCHER
RIGHT STRETCHER
CODE
9
9
9
6
1
QTY.DESCRIPTION FIGURE
1
2
3
4
5
BOLT
LOCK WASHER
FLAT WASHER
SCREW
ALLEN KEY
NO.
Additional tools required:
Crosshead Screwdriver
D

ASSEMBLY INSTRUCTIONThis unit can be assembled by 1 person. Approximate time of assembly: 20 minutes.
ITEM: 130059
3 of 4 www.coastercompany.com
Align and attach the seat (D) to the back rest (A) using the bolts (1) lock washer (2) flat
washer (3) tighten with allen key.
Align and attach the right and left stretcher (F & G) to the back rest (A).
Align the front right and left legs (C & B) to the assembled pieces from step 2.
STEP 1
STEP 2
STEP 3
D
F
G
B
“L” C
“R”
arrow
up
C
G
“R”
C
D
2x
2x
F
G
A
G
A
2x
arrow
up
G
2x
“L”
“R” “R”
5
x5
3
x5
2
x5
1
D
1
3
2
1
3
2
1
3
2
A
A
D
2x
Get stretchers here
D

ASSEMBLY INSTRUCTIONITEM: 130059
4 of 4 www.coastercompany.com
STEP 4
STEP 5
STEP 6
B
ECE
C
arrow
up
C
G
2x
2x
5
x4
3
x4
2
x4
1
D
D
1
3
2
1
3
2
CC
B2x
A
re-attach
cloth cover
A
x6
4
4
F
F
E
G
6x
Attach the front stretcher (E) to the front right and left stretcher (C & B).
Secure the front right and left legs (C & B) to the seat (D) using bolts (1) lock washer (2) flat
washer (3) tighten with allen key.
Secure all the stretchers (A, G, E & F) to all the legs, using the screws (4) tighten with a
screw driver (not included).