Coaster 305911 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
305911 (B1&B2)
Daybed
COASTERFURNITURE.COM
REVISION 0 : 07/04/2019 PAGE 1 OF 2
PAGE 1 OF 8

ITEM:
305911 (B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
PARTS IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 35 MINUTES
PAGE 2 OF 8 COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
LEFT SIDE PANEL
A
RIGHT SIDE PANEL
B
BUN FOOT
C
1PC
1PC
4PCS
ROLL SALT
(7PCS)
D
TRUNDLE
SIDE PANEL
E
TRUNDLE ROLL
SLAT (5PCS)
F
2SETS
2PCS
2SETS
B1 (BOX 1)
BACK PANEL
G
FRONT RAIL
H
BACK RAIL
I
TRUNDLE
FRONT PANEL
J
1PC
1PC
1PC
1PC
KTRUNDLE
BACK PANEL
TRUNDLE SLAT
L
1PC
3PCS
B2 (BOX 2)
M6SETS
CASTER WITH
SCREW

ITEM: 305911 (B1&B2)
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
HARDWARE IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
PAGE 3 OF 8 COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
1
2
3
4
5
6
16PCS
4PCS
16PCS
16PCS
4PCS
12PCS
SHORT BOLT
(M8 x 20MM - RBW)
MEDIUM BOLT
(M6 x 40MM - RBW)
LONG BOLT
(M6 x 50MM - RBW)
LOCK WASHER
(15/64” x 13 Ø - RBW)
7
8
9
16PCS
1PC
1PC
SMALL ALLEN WRENCH
BIG ALLEN WRENCH
(M4 x 100MM - BLK)
(M5 x 65MM - BLK)
BIG FLAT WASHER
SMALL FLAT WASHER
(15/64” x 19 Ø - RBW)
(15/64” X 13 Ø - RBW)
FLAT HEAD SCREW
(M4 x 32MM - RBW)
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 305911 (B2)

ITEM: 305911 (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 1
PAGE 4 OF 8 COASTERFURNITURE.COM
STEP 2
A
B
H
I
1
9
AB
C
3
8

ITEM: 305911 (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 3
PAGE 5 OF 8 COASTERFURNITURE.COM
STEP 4
H
I
G
A
B
54
2
8
D
H
A
B
I
7
D
G

PAGE 6 OF 8 COASTERFURNITURE.COM
STEP 6
E
J
K
E
1
9
ITEM: 305911 (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 5
cover the fabric lining behind the back panel.

PAGE 7 OF 8 COASTERFURNITURE.COM
STEP 8
L
M
L
8
3
4
6
L
E
J
K
E
CASTOR
OUTLINE
ITEM: 305911 (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 7
x3

ITEM: 305911 (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 9
PAGE 8 OF 8 COASTERFURNITURE.COM
STEP 10
COMPLETE
F
K
J
F
7