Coaster 400180T User manual

400180T (B1-B3)
Twin Storage Bed
PAGE 1 OF 9 COASTERFURNITURE.COM
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 01/10/2007
REVISION 1 : 01/08/2013
REVISION 2 : 09/11/2018
REVISION 3 : 12/02/2019

ITEM:400180T (B1-B3)
PARTS IDENTIFICATION
ASTORAGE HEADBOARD 1PC
EHEADBOARD LEG BOTTOM CLEAT 1PC
B
COASTERFURNITURE.COM
B1 ( BOX 1 )
HEADBOARD LEG 1PC
FFOOTBOARD 1PC
B3 ( BOX 3 )
PAGE 2 OF 9
40 MINUTES
ASSEMBLY TIME
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
B2 ( BOX 2 )
CROLL SLAT
(14PCS)
D SIDE STORAGE BOX
GBED RAIL
1SET
1PC
1PC
HB
400180T (B1)
FROM BOX 1
STORAGE HEADBOARD
COMPLETE
1PC
F
400180T (B2)
FROM BOX 2
FOOTBOARD
1PC
OR

Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
NOTE:
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 400180T (B1)
HARDWARE IDENTIFICATION
COASTERFURNITURE.COM
PAGE 3 OF 9
ITEM:400180T (B1-B3)
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
ASSEMBLY INSTRUCTIONS
11PC
ALLEN WRENCH
(M4 x 110mm - BLK)
26PCS
SHORT BOLT
(M6 x 30mm - BLK)
3
9PCS
LONG BOLT
(M6 x 50mm - BLK)
4
15PCS
LOCK WASHER
(5/16" - BLK)
5
15PCS
FLAT WASHER
(5/16" x 18 x 1.2 - BLK)
6
2PCS
WOOD DOWEL
(M10 x 40mm)
7
28PCS
FLAT HEAD SCREW
(M4 x 25mm - BLK)

ASSEMBLY INSTRUCTIONS
STEP 2
COASTERFURNITURE.COM
PAGE 4 OF 9
STEP 1
ITEM:400180T (B1-B3)
OR 1
7
3
4
B
E
OR
1
734
1
234
A
B
B
A
2.1
2.2

STEP 4
COASTERFURNITURE.COM
PAGE 5 OF 9
ASSEMBLY INSTRUCTIONS
STEP 3
ITEM:400180T (B1-B3)
OR
DD
BACK VIEW
D
1
7
3
4
1
2
3
4
4.1
4.2
HB
HB
HB

COASTERFURNITURE.COM
PAGE 6 OF 9
ASSEMBLY INSTRUCTIONS
STEP 5
ITEM:400180T (B1-B3)
STEP 6
D
G
1734
D
F
1
7
3
4
5
HB
HB

COASTERFURNITURE.COM
PAGE 7 OF 9
ASSEMBLY INSTRUCTIONS
STEP 7
ITEM:400180T (B1-B3)
STEP 8
D
F
D
F
G
1
734
HB
HB

COASTERFURNITURE.COM
PAGE 8 OF 9
ASSEMBLY INSTRUCTIONS
STEP 9
ITEM:400180T (B1-B3)
STEP 10
OR
6
C
STOPPER(B)
STOPPER(A)
STOPPER(A)
STOPPER(B)

COASTERFURNITURE.COM
PAGE 9 OF 9
ASSEMBLY INSTRUCTIONS
ITEM:400180T (B1-B3)
STEP 11
COMPLETE

COASTERFURNITURE.COM
ITEM:400180T (B1-B3)
NOTE : DIMENSION TOLERANCE ±5%
88.3"
41.6"
24.8"
INNER: 39.5" x 76"
INNER SIZE OF DRAWER A : 4.9" x 16" x 22.2"
17.2"
41.1"
50"
24.4"
6.9"
13.9"
11"
17.8"
8.9"
17.1"
6.8"
13.9"
8.8"
8.9"