Coaster 301061KW User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
301061KW (B1&B2)
California King Bed
COASTERFURNITURE.COM
REVISION 0 : 03/10/2017
REVISION 1 : 11/15/2019 PAGE 1 OF 2
PAGE 1 OF 6

ITEM:301061KW (B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
PARTS IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PAGE 2 OF 6 COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
HEADBOARD
A 1PC B 1SET
B1 (BOX 1)
FOOTBOARD
C
BRACKET
D
1PC
4PCS
6PCS
1SET
G
H
1PC
2PCS
E
F
4PCS
1PC
I
B2 (BOX 2)
ROLL SLAT
(13pcs)
LEG CENTER RAIL
SUPPORT
WITH LEVELER
RIGHT BED RAIL
(WITH “G” LABEL)
CENTER RAIL
LEFT BED RAIL
(WITH “F” LABEL)
301061KW (B1)
FROM BOX 1
HEADBOARD
A

ITEM:301061KW (B1&B2)
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
HARDWARE IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
PAGE 3 OF 6 COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
1
2
3
4
20PCS
6PCS
26PCS
1PC
(M8 x 30MM - RBW)
(M6 x 50MM - RBW)
SMALL ALLEN WRENCH
(M4 x 100MM - BLK)
51PC
BIG ALLEN WRENCH
(M5 x 65MM - BLK)
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 301061KW (B2)
SHORT BOLT
LONG BOLT
FLAT HEAD SCREW
(M4 x 32MM - RBW)
ASSEMBLY INSTRUCTIONS

ITEM:301061KW (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 1
PAGE 4 OF 6 COASTERFURNITURE.COM
STEP 2
D
E
5
1
F
G
15

ITEM:301061KW (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 3
PAGE 5 OF 6 COASTERFURNITURE.COM
STEP 4
C
G
F
1 5
1 5
A
F
G

COASTERFURNITURE.COM
ITEM:301061KW (B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 5
PAGE 6 OF 6
STEP 6
COMPLETE
4
2
B
H
I
B
H
I
3
B

84.65"
ITEM:301061KW (B1&B2)
COASTERFURNITURE.COM
Note : Dimension tolerance ±5%
INNER SIZE : 72.68" X 85.43"
42.52"
5.91"
3.54"
7.87" 13.19"
92.91" 76.38"
71.26"
80.31"