Coaster 102723 User manual

PAGE 1 OF 2
102723
BENCH WITH CUSHION SEAT
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
www.coastercompany.com
REVISION 0 : 06/26/2011
REVISION 1 : 09/13/2011

ITEM : ASSEMBLY INSTRUCTIONS
A
1PC
B
LEG
4PCS
1
WRENCH
1PC
2
HEX BOLT
8PCS
3
LOCK WASHER
8PCS
4
FLAT WASHER
8PCS
STEP 1
www.coastercompany.com
PAGE 2 OF 2
102723
HARDWARE IDENTIFICATION
PARTS IDENTIFICATION
Place seat frame with cushion seat upside down on soft surface, then align and fasten all legs to seat frame using bolt, lock
washer and flat washer and tighten with wrench.
SEAT FRAME WITH CUSHION SEAT
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishment