Coaster 223105 User manual

REVISION 0 : 05/20/2019 COASTERFURNITURE.COM
223105
Chest
PAGE 1 OF 4
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life

PARTS IDENTIFICATION
COASTERFURNITURE.COM
PAGE 2 OF 4
A1PC
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
STEP 1
ASSEMBLY INSTRUCTIONS
CHEST
ITEM:223105
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
A
10 MINUTES
ASSEMBLY TIME

COASTERFURNITURE.COM
PAGE 3 OF 4
ITEM:223105
STEP 2
ASSEMBLY INSTRUCTIONS
STEP 3
COMPLETE
A

Injury may result from tipping furniture.
WARNING
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
This tip restraint must be attached to a wall
stud using long screw enclosed.
STEP 1
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
STEP 2
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
STEP 3
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the large hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed.
Confirm that the strap is securely laced and locked.
ITEM:223105
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
COASTERFURNITURE.COM
PAGE 4 OF 4