Coaster 183444 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
183444
COUNTER HT STOOL
COUNTER HT STOOL
REVISION 0 : 05/13/2020
PAGE 1 OF 5
COASTERFURNITURE.COM

ITEM:
183444
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
PARTS IDENTIFICATION
ASEAT AND
BACK 1PC
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
5 MINUTES
B BASE 1PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 2 OF 5

ITEM:
183444
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
HARDWARE IDENTIFICATION
1ALLEN KEY
(4MM)
1PC
2ALLEN SCREW
(M6*20)
4PCS
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
5 MINUTES
(M6*20)
3MESON
(
∅
6*16*1.2)
4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 3 OF 5

ITEM: 183444
ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
COMPLETE
COASTERFURNITURE.COM
PAGE 4 OF 5

ITEM:
183444
COASTERFURNITURE.COM
PAGE 5 OF 5