Coaster Mina 193831 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
193831
DINING TABLE
REVISION 0 : 12/06/2021
PAGE 1 OF 5
COASTERFURNITURE.COM

ITEM:193831
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
PARTS IDENTIFICATION
A
TOP 1PC
B
LEG 4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
15 MINUTES
PAGE 2 OF 4

ITEM:193831
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
HARDWARE IDENTIFICATION
1
ALLEN KEY
(4MM )
1PC
2
ALLEN SCREW
(M6*20)
20PC
3
ADJUSTING
FOOT
(M6*13)
4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
15 MINUTES
PAGE 3 OF 4

ITEM:193831
ASSEMBLY INSTRUCTIONS
STEP:1 COMPLETE
COASTERFURNITURE.COM
PAGE 4 OF 5
HOW TO EXTEND THE TABLE
AFTER EXTENSION

ITEM:193831
ASSEMBLY INSTRUCTIONS
COASTERFURNITURE.COM
PAGE 5 OF 5