Coaster CRLM1078 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 4
QUEEN BED

ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warning!
1. Donˊt attempt to repair or modify parts that are broken or defective. Please contact the store
2. This product is for home use only and not intended for commercial establishments.
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
HARDWARE IDENTIFICATION
HEADBOARD
PANEL
1PC
1BOLT
(M6 x 35mm - BLK)
12PCS
2LOCK WASHER
(M6 - BLK)
3SMALL FLAT
WASHER
(M6 x 13mm - BLK)
FOOTBOARD PANEL
BED RAIL 2PCS
LEFT HEADBOARD
LEG
1PC
RIGHT HEADBOARD
LEG
1PC
4PCS
12PCS
BED SLAT 4PCS
BED SLAT SUPPORT
WITH LEVELER
4PCS
LEFT FOOTBOARD
LEG
1PC
RIGHT FOOTBOARD
LEG
1PC
5
WOOD PLUG
ALLEN WRENCH
(M4 x 65mm - BLK)
1PC
4PCS
6
PAN HEAD SCREW
(M4 x 32mm - BLK)
8PCS
7
4BIG FLAT WASHER
(M6 x 19mm - BLK)
8PCS
* FROM BOX 1
FOOTBOARD
1PC
* FROM BOX 1
HEADBOARD
COMPLETE
1PC
AN
DN
GN
BN
CN
EN
FN
HN
IN
HBN
FBN
ASSEMBLY INSTRUCTIONS
immediately.
ASSEMBLY TIME 20 MINUTES
PARTS IDENTIFICATION
B1 (BOX 1 ) B2 (BOX 2 )
FIGUREPART NAME QTY
FIGUREHARDWARE NAME QTY
1PC
PAGE 2 OF 4
202411Q (B1)
202411Q (B1)
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 202411Q (B1)

STEP 1
STEP 2
123
5
6
124
5
4
2
1
5
6
3
2
1
5
AN
BN
CN
DN
EN
FN
ASSEMBLY INSTRUCTIONS
(B1) - BOX 1
PAGE 3 OF 4
STEP 1.1
STEP 1.2
STEP 1.3
STEP 2.1
STEP 2.2
STEP 2.3

STEP 4
STEP 3
GN
HBN
FBN
STEP 5
COMPLETE
ASSEMBLY INSTRUCTIONS
(B1 & B2) - BOX 1 & BOX 2
PAGE 4 OF 4
(B1 & B2)
7
STEP 4.1
STEP 4.2
HN
IN
HN