Set up the product on flat, stable ground.
Do not unplug while the product is in operation.
Always unplug the product when not in use.
Leave enough space between the product and any other products.
WARNING ― To reduce the risks of, burns, fire, electric
shock, or injury to persons and product damage
IMPORTANT SAFETY INSTRUCTION
DANGER ― To reduce the risk of serious injury or death
Warning • Always unplug the product before cleaning.
• Clean after fan is completely stopped.
• Never use alkaline detergent or flammable cleaning
agents such as acetone, bleach or alcohol to clean
any part of the product.
• Do not disassemble the product.
HOW TO CLEAN AND MAINTANANCE
1. Clean the outside of the appliance
• Wipe away dust with a soft cloth soaked in warm water from the surface
of the product.
2. How to store when the product is not used for long term
• Avoid the place exposed to high humidity.
• Store the product with silica gel.
Do not use in locations exposed to moisture or water.
Do not install the product near a heating device or under the direct
sunlight.
Avoid the place with the possible gas leakage.
Do not touch the product and power plug with wet hands.
Check if the voltage indicated on the appliance corresponds to the local
power voltage before you connect the product.
Insert a power plug into the wall outlet with placing the wire downward.
When removing the power plug, always hold the plug and never pull by
the cord.
Do not bend cord badly, and it may damage the cord.
Never allow any liquid to enter the product.
Do not operate the product with a damaged cord and plug. Do not dis-
assemble, modify, and repair the product. All other repairs or exchang-
es should be completed by a qualified technician, manufacturer or
distributor to avoid any risk.
— Contact Customer Service. See the information on the last page of
this manual.
The product should not be used by person (including children) with re-
duced physical, sensory or mental capacities or lack of experience and
knowledge, unless they are supervised or have been given instructions
beforehand concerning use of the product by person responsible for
their safety. Children must not play with or on the product.
Do not run cord/adaptor under carpeting and heavy objects including
furniture or appliances, and cover cord/adaptor with throw rugs,
runners, or similar coverings.
Arrange the cord away from traffic areas where it can be tripped over.
CONTROLS OVERVIEW
Operation Status Indicator
Power Button
PRODUCT PACKAGE
Adaptor with power cord
(18V, 1A)
Front view Side view
Mounting Bracket
Screws for Wall Mount
User Manual
— This page is designed to ensure user safety and the prevention of damage to
the product.
— Read this user manual carefully before you use the product, and ensure the
product is used properly.
HOW TO INSTALL (Wall Mount Type)
• Do not use in locations exposed to moisture or water.
• Avoid the place where the children can reach to.
• Do not touch with wet hands.
Warning
HOW TO OPERATE
1. Power On
Press the power button.
2. Power Off
During operation, press the power button to stop the operation.
When the power is on, the operation status indicator is lit
to activate plasma.
NOTE
①Drill the 6mm diameter holes 107mm apart at least 30mm deep.
②Screw the mounting bracket to the wall using the screws provided.
③Hang the main body on the mounting bracket. (See the arrow.)
④Plug the AC adapter into the power connector of the product.
X-PLA Body
