COBI ZAD-ECO-V2 User manual

OPERATOR PANELS
Operator panel is a simple programmable
panel-mounted or panel-manual device
for setting standard signals in control
and adjustment processes: 0...10V.
The range of displayed values can be set
with push-buttons and displayed as 0...9999
with a decimal point placed in any position.
The device features a single-turn potentiometer
Right Start and Left Start push-buttons
with pilot light.
Specifications
Supply voltage: 12...24VDC
Preset signal: 0...10V
Scaled preset value display
Digital outputs to change motor direction
Left Start, Right Start push-buttons with pilot light
Single-turn potentiometer
Operating temperature: -20...60°C
Installation: panel-mounted, panel-manual
Model:
ZAD-ECO-V2
www.cobi-electronic.com.pl
Inputs / Outputs
ELECTRONICELECTRONIC
Start
Right
Start
Left
Start/
Stop
GND
Supply
12-24VDC
123456
Digital outputs
Ouput
0-10V
+
-

OPERATOR PANELS
[n-00] set value lower limit [-999... ...9999]0
[n-01] set value upper limit [0... ...9999]100
[n-02] set value decimal point position [ ] 00000
[n-03] lock minus sign [0 ] inactive, [1] active
[n-04] operation mode push-buttons [ ] stable, [1] pulse 0
[n-05] menu lock [ ] inactive, [1] active0
Press and hold stop for min. 5 seconds after power on to unlock
STOP = enter/exit menu, START LEFT/RIGHT = change value
factory settings
.
www.cobi-electronic.com.pl
Programmable parameters
Wiring diagram
Start
Right
Start
Left
Start/
Stop
GND
Supply
12-24VDC
1 2 3 4 5 6
Digital outputs
Ouput
0-10V
+
-