Cobra LR40 User manual

MODEL: LR40
LAWN ROLLER
OWNERS MANUAL
CAUTION
Before using this product, please read this manual carefully to understand the proper use of your garden roller.
Please keep this manual for future reference.
Never attach a garden hose to the fill/drain hole when filling. Dangerous pressure could build up inside the roller.
Never use roller up and down hills, always work across hills and slopes.
Use caution when turning, slowing or stopping.
Always drain the roller for storage over winter as water may freeze inside the roller causing it to split.
Product colours may vary.

Parts and construction

Assembly Instructions
Fit the Lower Handle to the Roller by
placing one end of the Handle over the
Roller Shaft.
Then pull the other end of the Handle to
place it over the other end of the Roller
Shaft. You may need to bend the Handle
slightly to stretch it over the Roller Shaft.
Secure with the E-Clips and Washers
supplied. The E-Clips will need to be
squeezed onto the Roller Shaft using
pliers.
Fit the Scraper to the Lower Handle using
the supplied Bolts, Washers and Nuts as
shown ensure that the Scraper is just
clear of the Roller before fully tightening
the Nuts.
Fit the Upper Handle to the Lower Handle
as shown using Bolts, Washers and Nuts.
The Handle may be folded for storage by
slackening the nuts.
The Roller may be filled with water or
sand by removing the Fill/Drain plug,
filling with the required amount and
replacing the plug. If using water the
Roller will need to be drained before
winter storage, in order to avoid frost
damage.
Always store covered or indoors to
prevent corrosion or deterioration of the
plastic.