Reolink RLC-1212A User manual

RLC-1212A
With F1.6 large aperture lens and 12MP ultra high definition, RLC-1212A allows you
to enjoy the flawless pictures and videos. You can easily view the hard-to-see
details captured by the camera.
1. Specs
1
Mount
2
Speaker
3
Metal Aluminum Case
4
Spotlight
5
IR LEDs
6
High Definition Lens
7
Daylight Sensor
8
Built-in Mic

1
Micro SD Card Slot
1
Power
2
Reset Button
3
Network
4
Waterproof Lid

2. Setup and Install
Set up the Camera
What’s in the Box
Note: The package content may vary and update with different version and
platforms, please take the below information only for a reference. And the actual
package content are subject to the latest information on the product selling page.
RLC-1212A
Set up the Camera on the App
Here is a guide on how to initially set up the camera via Reolink App.
Step 1. Tap the icon in the top right corner.
Surveillance Sticker*1
Pack of Screws*1
Mounting Template *1
RLC-1212A*1
Quick Start Guide*1
1m Network
Cable*1
Waterproof Lid *1

Note: If you've enabled the Add Device Automatically option on the App's
Settings page, you can tap this device on the Devices page and turn to Step
3directly.
Step 2. Scan the QR code on the back of the camera. You may tap Light to enable
a flashlight when setting up the camera in a dark environment.
If the phone doesn't respond, please tap Input UID/IP and then manually type in
the UID (16-digit characters under the QR code of the camera). Then tap Next.

Step 3. Create a login password for your camera. Then tap Next.
Step 4. Name your camera. Then tap Next.
Step 5. Initialization finished! You can start live viewing now.

Install the Camera
Please follow the steps below to install the camera.
Step 1. Drill holes in accordance with the mounting hole template.
Step 2. Install the mount base with the mounting screws included in the package.
(For WiFi cameras, please install antenna in advance)

Notes:
Run the cable through the cable notch on the mount base.
As for the WiFi camera, it is recommended that the antennas be installed upward
or horizontally for better WiFi connection.
Step 3. loosen the adjustment knob by twisting it counterclockwise on the security
mount, and turn the camera to get an ideal view.
Step 4. Turn the knob clockwise to fix the camera in place.

Note: If your camera has another mount without the adjusting knob, please loosen
the adjusting screw with the provided hex key and turn the camera as shown
below to adjust the angle.