Code Alarm SRT 9000 User manual

1
IMPORTANT NOTE: TheoperationoftheSecurityandConvenienceSystem asdescribedinthis
manualisapplicabletomostvehicles.However, due to theconfigurationof some vehicles, some
functionsAND/ORSAFETYPRECAUTIONS may not apply. Please see your installingdealerformore
information.
Owner's Manual
SRT 9000
Remote Vehicle Control System
Deluxe Vehicle Security and Remote
Start System with 900Mhz Two Way
Confirming OLED Remote Control

2
Table of Contents
2-Way Transmitter Main Display Screen ........................................................................................ 4
2-waytransmitter button descriptions andlocations
Charging the Battery....................................................................................................................... 5
2-waytransmitter maindisplaypage
Vehicle Menu Option on the 2-Way Transmitter.......................................................................... 7
Menuoptions for the2-waytransmitter
Settings for the 2-Way Transmitter .............................................................................................. 8
Buttonbeeps
Buttonlock
Melody/vibrationmode
Demomode
Settings for the 2-Way Transmitter, continued ........................................................................... 9
Powersavemode
Parkingmetersetting
Parkingarea setting
Settings for the 2-Way Transmitter, continued ......................................................................... 10
Lightingforthe2-way transmitter
Clockadjustment
Alert alarm timer
Settings for the 2-Way Transmitter, continued ......................................................................... 11
Countdown timer
Daily start timer
Nameof TX setting
Settings for the 2-Way Transmitter, continued ......................................................................... 12
Nameof channel setting
Language setting
Setto defaults
Resettingthe 2-way transmitter
Using Your Remote Control ........................................................................................................ 13
Armingthe security system
Armwith sensor bypass
Hiddenalarm feature
Active/Passivearming
Using Your Remote Control, continued ..................................................................................... 14
Disarmingthe security system
Twostage door unlock*
Attempedintrusion identification
Activatingthe trunk releasefeature*
* Mayrequire additional installation labor, components and installation cost

3
Table of Contents, continued
Using Your Remote Control, continued ..................................................................................... 15
Activatingoptional AUX 1*
Activatingoptional AUX 2*
Activatingoptional AUX 3*
Activatingoptional AUX 4*
Using the progressive car finder feature
Usingthepersonal protection alarm
Using Valet Mode .......................................................................................................................... 16
Using Your Remote Vehicle Starter ............................................................................................. 16
Remotestarting your vehicle
Enteringthe vehicle while it’s running via remote start
Using Your Remote Vehicle Starter, continued ......................................................................... 17
Preheating or precooling the vehicle’s interior
Usingthe quick stop feature
Operatingthe 1/2/3 hour start up timermode
Using Your Remote Vehicle Starter, continued ......................................................................... 18
Operatingthe daily start timer
Usingthe safety control switch
Remotestartsafetyfeatures
Usingtheoptionalturbo timer
Additional System Features .......................................................................................................... 19
Pagecallout
Checkvehicle status
Checktemperature
Trigger check
Multiplevehicle operation
Anti Hi-Jack Mode ......................................................................................................................... 20
Quick Reference Operation Guide .............................................................................................. 20
Quick Reference Operation Guide, continued .......................................................................... 21
Replacing Remote Control Batteries .......................................................................................... 22
Emergency Override Procedure ................................................................................................... 22
Lifetime Warranty.......................................................................................................................... 22

4
2-Way Transmitter Main Display Screen
2-Way Transmitter Button Descriptions / Locations
OLED MAIN DISPLAY SCREEN
Battery Level
Car Jacking
In Range Indicator
Door Lock
Door Unlock
Alarm Status
Temperature
Engine Running
Melody Mode
Timer Start Alert Alarm
C
ount Down Timer
Parking Timer
Timer
Transmitter Name
Vibration Mode
CHARGING
PORT
SWITCH
BUTTON
SWITCH
RESET BUTTON
BUTTONS 1 -4

5
Charging the Battery
Your2-way transmitterispowered by a built-in3.7Vlithium polymer battery. Whenthescreen displays low batteryor
the icon is flashing it is time to recharge your remote transmitter. Charge the transmitter battery using the
suppliedplug-inhomecharger.Whilethebattery of the transmitter is being charged you can push the “ ” side button
to check it’s charging status. When the screen displays “BATTERYFULL” unplug the charger. Note that it will be
necessaryto charge thebatterybefore use.
2-Way Transmitter Main Display Page
Todisplaythemain page of the2-waytransmitterpressthe “ ” icon button, the screen will display themaindisplay
pageandthesystem status. In the case that an icon is flashing on the main display page press the “ ” icon button
onceagain to view the detail of the flashing icon as in the following examples.
When “TRIGGERED” is displayed, press the “ ”icon button to display which input was triggered.
Low Battery Display
Battery Charging
Main Display Page

6
When the remotestart “ ” icon is flashing press the“ ”icon button to display theremote startstatus.
Whenthe count down timer “ ”icon is flashing press the “ ” icon button to display thecountdowntimer.Use
buttonsnumbered 1-4tostart, stoporexit thecountdowntimer mode.
When the start timer “ ” icon is flashing press the “ ” icon button to display the daily start timer, timer start or
temperaturestart, dependingon whichyouhave selected.
When the alert alarm timer “ ” icon is flashing press the “ ” icon button to display the alert alarm timer. Use
buttonsnumbered 1-4 to start, stop or exit the alert alarm timer mode.
2-Way Transmitter Main Display Page, continued
or or

7
Vehicle Menu Options on the 2-Way Transmitter
The2-way transmitter allows multiple operations from the main fourbuttonsbyscrollingthrough the menu screens
andselecting the desired function. To scroll through the menu screens pressthe “ ” switch upuntil the desired
functionis displayed. Press the corresponding button number (1-4) within five seconds as displayed totheleftof
eachfunction.
Menu Options for the 2-Way Transmitter
The2-way transmitter has multiple convenience features thatareselectablefrom the main four buttons by scrolling
throughthe menu screens and selecting the desired feature. To scroll through the menu screens press the “ ”
switchdown until the desired function is displayed. Pressthecorrespondingbutton number (1-4) within five seconds
asdisplayed to theleftof each function.
Menu 1 Menu 2
Menu 3 Menu 4
Menu 5 Menu 6 Main
Menu 1 Menu 2 Menu 3 Menu 4
Menu 5 Menu 6 Main

8
Settings for the 2-Way Transmitter
Button Beeps
The2-way transmitter buttons will respond with a short “beep”soundwhenpressed.To turn this featureonoroff
scrollto menu 1 and select BUTTON BEEPS, then use thecorrespondingtransmitterbuttonsto make your
selections.Pressthe side“ ” button in to exitand return to the mainpage.
Button Lock
Tolockorunlock the 2-way transmitter buttons scroll to menu 1 and select BUTTONLOCK, then use the
correspondingtransmitter buttons to make your selections. Press the side “ ” button in to exit andreturntothe
mainpage.
Melody / Vibration Mode
The2-way transmitterconfirms vehiclecommandswith amelody andonscreen display.Toswitch betweenmelody,
vibrationorboth, scroll to menu 1 and select MELODY& VIBRATION, then use the corresponding transmitter
buttonsto make your selections. Press theside“ ”button in to exit and returntothemain page.
Demo Mode
Toviewaquickdemoofsomeoftheonscreendisplaysscrolltomenu1and select DEMO MODE, then use the
correspondingtransmitter buttons to make your selections. Press the side “ ” button in toexitandreturn to the
mainpage.
or
or
or

9
Settings for the 2-Way Transmitter, continued
Power Save Mode
Whilein powersavemode the 2-waytransmitter will notattemptto communicatewiththe vehicle toconserve
batterylife. This feature is useful when leaving the vehicle for extended periods oftimeorifusingthe secondary 1
way transmitter. Note that if the alarm is to trigger the 2-way transmitter will NOT indicate the event.To turn this
featureon or off scroll to menu 2 and select POWERSAVE,thenusethecorrespondingtransmitterbuttons to
makeyour selections. Press the side“ ”button in to exit andreturntothe main page.
Parking Meter Setting
The2-way transmitter can be settoalert you to an expired parkingmetertime, in the example belowthetimeis set
for30 minutes. During the countdown you can check the remaining timebypressinginthe side button, the
remainingtime will be displayed at the topofthescreen. When the timer reaches 0:00 the2-waytransmitterwill
soundanalert,pressanybutton to silence the alert.Toturnthisfeature on scroll to menu 2 and select PARKING
METER,thenuse the corresponding transmitter buttons to select the amount of time needed. Press the side “ ”
buttonin to exitandreturn to the mainpage.
Parking Area Setting
The2-way transmitter can be set to display the parking lotsectionwhenyoupark your vehicle in a large lot or
structuresuch as an airport parkinggarage.The example below shows section B120,To enter B120 as the
locationscrolltomenu2and select PARKINGAREA,thenusethe corresponding transmitter buttons to change
thetext.To recall the parkingarea scroll to menu 2 and select parking area, your previous entry of B120 will be
displayedat the top of the screen and willremaininthe 2-way transmitter’s memory until changed or cleared.
or

10
Settings for the 2-Way Transmitter, continued
Lighting for 2-Way Transmitter
Thissetting adjuststheamountof time the 2-way transmitter’sdisplay will remain active withoutactivity.Toadjust
theamount of time the display stays active scrolltomenu2 and select LIGHTING FOR OLED, then usethe
correspondingtransmitter buttons to make your selections. Press the side “ ” button in toexit andreturn to the
mainpage.
Clock Adjustment
Toadjustthe clock on the main page scroll to menu 3 and select CLOCK ADJUSTMENT, then use the
correspondingtransmitter buttons to make yourselections.
Alert Alarm Timer
Toadjustthetimeofday in which you would like to be alerted, scroll to menu 3 and selectALERTALARMTIMER,
thenuse the correspondingtransmitterbuttons to make yourselections.

11
Count Down Timer
The2-way transmitter is equipped with a countdowntimerthat will sound an alert once thetimereaches0:00. To
adjustthecount down time, scroll to menu 3 and select COUNTDOWNTIMER, then use the corresponding
transmitterbuttons tomakeyour selections.
Settings for the 2-Way Transmitter, continued
Daily Start Timer
Toadjustthedaily starttime scroll to menu 3and select DAILYSTARTTIMER, then use the corresponding
transmitterbuttons tomakeyour selections.
Name of TX Setting
The2-way transmitternamecan be modifiedandappears above theclock display onthemain page.Toedit the
transmittername, scroll to menu 4 and select the transmitter , then use the corresponding transmitter buttonsto
makeyourselections.

12
Name of Channel Setting
The2-way transmitter’s AUX output names can be modified to reflect the accessory in which it controls, such as
windowautomation or garage door control. To edittheAUX output name, scroll tomenu5,then use the
correspondingtransmitter buttons to make yourselections.
Settings for the 2-Way Transmitter, continued
Language Setting
Tochange the 2-way transmitters display textbetweenEnglish,Spanishor French, scroll to menu 6, thenusethe
correspondingtransmitter buttons to make yourselections.
Set to Defaults
Toset the 2-way transmitter back to thefactorydefaultsettings,scroll to menu 6, then use the corresponding
transmitterbuttons tomakeyour selections.
Reseting the 2-Way Transmitter
Insome situations it may be necessary toresetthetransmitter, to do so, press and releasetheresetbutton shown
onpage 4 of this manual. After resetting the transmitter it may be necessary tore-syncthetransmitterwiththe
vehicle,do this by pressing the lock button several times until the transmitterorvehicleresponds.

13
Arming the Security System
Toarm the system, exit thevehicle,closeall doors, then press the LOCK button ontheremotecontrol. The system
willsound 1 time and the parking lights will flash1 time, indicating the system is armed, haslockedthe doors (if
equippedand connected) and activated the starter disable feature. The status indicator (blue warning light on the
dash)will blink steadily,once per second. To arm the system silently, press and hold the LOCKbuttonfor2 seconds
orscroll to vehicle menu 1 and press button#1. The parking lights will flash 1 time, indicatingthe system is armed,
haslocked the doors (if equipped andconnected)andactivated the starter disable feature. Thestatusindicator
(bluewarninglightonthedash)willblinksteadily,oncepersecond.
Thesystem will sound 3timesif a vehicle entrypointhas been left openandwill be displayed onthe2-way
transmitteras shownbelow.
Using Your Remote Control
Arm with Sensor Bypass
Toarm the systemandbypassShock Sensor Zone 4,scrollto
vehiclemenu2 and press button #1 or press LOCK , TRUNK
within5 seconds.
Toarm thesystemand bypassExternal SensorPortZone 6,
scrolltovehiclemenu2andpressbutton#2 or press LOCK,
TRUNK, TRUNK within 5 seconds.
Toarm thesystem and bypassbothShock Sensor Zone4and ExternalSensorPort zone
6, scroll to vehicle menu 2 and press button #3 or press LOCK, TRUNK, TRUNK,
TRUNKwithin 5 seconds.
Hidden Alarm Function
Thehidden alarm function disables the siren/horn when triggered,while still flashing the
parkinglightsandcommunicating to the 2-way transmitter.Toarm the system and active
thehiddenalarmfeature,scrolltovehiclemenu1andpressbutton#3orpressTRUNK,
LOCKwithin 3 seconds.
Active/Passive Arming
Active Arming requires a signal from the transmitter toarmthe system. Note that if Automatic Rearm is selected
inprogramming,thevehiclewillrearmif disarmed and a vehicle door is not opened.
PassiveArming will automatically arm the system 30 seconds after all entrances are closed. If an entrance is
reopenedduring the 30 secondcountdownthe system will waitforthe entrance to closeandrestart the 30 second
countdown.
Tobypasspassivearmingpressandrelease the TRUNK button2timeswhilethe system is disarmed, the system
will chirp 1 time and the LED will turn on.To return to passivearming, press the LOCK or UNLOCK button.

14
Attempted Intrusion Identification
Thissystem will inform you ifanintrusion attempt has occurred while youwereaway from the vehicle. If an
intrusionattemptoccurred,the system will sound 4 times and the parking lights will flash 3 timeswhendisarming
thesystem. Enter the vehicleanobserve the dash mountedstatusLED to Identifywhichzone was triggered. The
2-waytransmitter will also display the intrusion identificationwhenthesystem is disarmed.
1. Zone1Hood- 1 flash, pause 1 flash, etc.
2. Zone2Trunk-2flashes, pause 2 flashes, etc.
3. Zone3 Door - 3 flashes, pause 3 flashes,etc.
4. Zone4 Shock Sensor - 4 flashes, pause 4 flashes, etc.
5. Zone5Ignition - 5 flashes, pause 5 flashes, etc.
6. Zone6OptionalSensor-6flashes,pause6 flashes, etc.
Theintrusion warning indicators are stored in the system’s memory and will be erased when the ignition key is
turnedon.
Disarming the Security System
Todisarmthe system press the UNLOCK button. The system willsoundandthe parking
lightswill flash 2times, and the doors will unlock(if equipped and connected). To disarm
thesystemsilently, press and hold the UNLOCK button for 2 seconds. The parkinglights
willflash,indicatingthesystemisdisarmedandhasunlockedthedoors(ifequippedand
connected).
Automatic Rearm: Ifthis feature is selected in programming, the system will rearm automatically60seconds
afterdisarming unless a door is opened.
Using Your Remote Control, continued
Two Stage Door Unlock (Optional)
Ifthis feature is enabled on your system, pressing theUNLOCKbuttonone time on the remote control will unlock
onlythe driver’s door. Press UNLOCK again to unlock theremaining doors.
Activating the Trunk Release Feature (Optional)
Ifthisfeatureisenabledonyoursystem,pressingandholdingtheTRUNKbutton on the remote control for 2
secondswill open the vehicle’s trunk or hatch.

15
Using Your Remote Control, continued
Activating Optional AUX 1 (Optional)
Ifthis feature is enabled onyoursystem, scroll to vehicle menu3and
pressthe AUX 1 button OR simultaneously press andreleasethe
LOCKand TRUNK buttons on the remote control to activatean
optionalfeature. This feature can be programmed for a wide range of
functionslike powerwindow or sunroofautomation, please consultyour
installingdealer to determine functionalityofyour system.
Activating Optional AUX 2 (Optional)
Ifthis feature is enabled onyoursystem, scroll to vehicle menu3and
pressthe AUX 2 button OR simultaneously press andreleasethe
UNLOCKand TRUNK buttons on the remote control to activate an
optionalfeature. This feature can be programmed for a wide range of
functionslike powerwindow or sunroofautomation, please consultyour
installingdealer to determine functionalityofyour system.
Activating Optional AUX 3 (Optional)
Ifthis feature is enabled onyoursystem, scroll to vehicle menu3and
pressthe AUX 3 button OR simultaneously press andreleasethe
TRUNKand STAR buttonson the remote control to activate an
optionalfeature. This feature can be programmed for a wide range of
functionslike powerwindow or sunroofautomation, please consultyour
installingdealer to determine functionalityofyour system.
Activating Optional AUX 4 (Optional)
Ifthis feature is enabled onyoursystem, scroll to vehicle menu3and
pressthe AUX 4 button OR simultaneously press andreleasethe
LOCKand STAR buttons on theremotecontrol to activate anoptional
feature. Thisfeaturecanbeprogrammedforawiderangeof
functionslike powerwindow or sunroofautomation, please consultyour
installingdealer to determine functionalityofyour system.
Using the Progressive Car Finder Feature
Pressthe LOCK button andtheUNLOCKbutton on the remote controltolocate your
vehicle. Thesystem will sound 5 times at low volume increasinginvolumeeach of 3 times
thebutton is pressed.
Using the Personal Protection Alarm (Panic)
Pressand hold the LOCK button andtheUNLOCK button on the remote controlfor3
secondsto activate the personal protection alarm. The system willsoundfor30 seconds.
Pressingany button on the remote control will turn the personal protection alarm off.

16
Using Valet Mode
Using Valet Mode
To engage valet mode:
1. Turntheignition key to the ON position.
2. Pressand hold the emergency overridebutton.
3. Theblue dashboard mounted LED will light solid
indicatingthat the system isinvalet mode.
Whenvalet mode isactivatedthe dash mounted statusLEDwill light
solid,andallsecurity functions will be disabled.
To disengage valet mode:
1. Turntheignition key to the ON position.
2. Pressand hold the emergency overridebutton.
3. ThebluedashboardmountedLEDwillturnoffindicating
thatthesystemhasexitedvaletmode.
Whenthevalet modehasbeendeactivatedthedashmounted status
LEDwill turn off and all security functions will be enabledthenexttimethe system is armed.
VALET OFF:
SECURITY ON
Using Your Remote Vehicle Starter
Remote Starting Your Vehicle
Toactivatethe remote vehicle startfunction, press and release the STAR button on the remote control 2 times
within2seconds. Thesystem will sound, the parking lights will flash 1 time and the system will check the vehicle
toensure it is safe to start, if all safety parameters are correct, thevehicle will start within 10 seconds (diesel
vehicles will take longer). The vehicle’s parking lights will turn on (or flash depending on system settings) as a
visualindication that the vehicle has startedand is running. Press and release the STAR button on the remote
control2 times within 2 seconds again to turn the vehicle off.
Ifyour vehicle stalls or does not start, the system will pause 3 seconds, then try 2 more times tostartthevehicle(a
totalof 3 attempts). The system willpause3 seconds between each startattempt. Ifthevehicle does not start after
the3rd attempt, the system willaborttheremote vehicle start process.
Entering the Vehicle while it is running via Remote Vehicle Start
1. Unlockthevehicle’sdoors.
2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!
3. Insertthe key into the ignition switch and turn totheON or RUN position.
4. Press the brake pedal. The remote vehicle starterwill disengage and the vehicle will operate normally.

17
Using Your Remote Vehicle Starter, continued
Preheating or Precooling the Vehicle’s interior
Beforeexiting the vehicle, set the temperature controls to the desired settingandoperation. Afterthesystem starts
thevehicle,the heater or air conditioning will activate and heat or coolthevehicle’s interior to your setting.
Operating the 1 / 2 / 3 Hour Start Up Timer Mode
Thesystem has the ability to startthevehicleevery 1, 2 or 3 hourswith
amaximun of 6cycles.The system also hastheability to monitor
temperatureandonlystart during 1, 2 or 3 hour times if the
temperaturefallsbelow a preset mark. This feature is especially useful
incold climates wheretheonly means to keeptheengine and engine
fluidswarmistoperiodicallystart the engine. Note that temperature
and1,2or 3 hours must be selected in options programming, see your
installing dealer for details.
WARNING!
Becertainthat the vehicle is outdoors before using this or any remote starting device. Arunningengineproduces
dangerouscarbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs. DO NOT remote
start the vehicle if it is garaged.
To begin the 1 / 2 / 3 hour start up timer mode:
1 a. Turn the ignition key ON then OFF.
2a. Within 15 seconds scroll to vehicle menu 5 and select TIMER START.
OR
1 b. Turn the ignition key ON then OFF.
2b.Within 15 seconds press theTRUNK then STAR buttons.
3. The parking lights will flash and the siren will chirp 3 times indicating timer start is active.
Thevehiclewill start every 1, 2 or 3 hours and run for thepresettimelimit (5, 10, 20 or 30 minutes) and
thenshutdown. This will continue for a maximum of 6 cycles unlessthetimerstartis cancelled.
To cancel the 1 / 2 / 3 hour start up timer mode, start the vehicle using the ignition key.
Using the “Quick-stop” Feature
Ifyou want to make ashortstopand keep your vehicle running(tokeepthe interior warm or cool),thequick-stop
featureallows youto dothiswhile keepingyourvehicle secureand your keyswith you.
To engage quick stop:
1. Stopthe vehicle and place the transmission in PARK.
2. Withyour foot offthe brake pedal, press and releasetheSTAR button on the remote control2times
within2 seconds. The parking lights will turn on indicatingthe vehicle is now running via remote vehicle
start.
3. Removethe keys from theignitionand exit the vehicle. PresstheLOCK button on theremotecontrol
tolockthe vehicle’s doors if desired.
Note: Donot leave children or animals unattended in the vehicle when using the quick-stop feature.

18
Using Your Remote Vehicle Starter, continued
Operating the Daily Start Timer
Thesystem has the ability to start your vehiclebasedona preset time entered into the 2-way transmitter. Priorto
activatingthis feature it will be necessary toenter the desired start time, refer to Daily StartTimeron page 11.The
dailystarttimerwillonly startthevehicle once per activation.Whenyouhave finished using thevehiclefor the day,
followthe steps below toactivethe daily start timer.
1. Turn the ignition ON then OFF.
2. Within 15seconds, scroll tovehicle menu 5and selectDAILYSTART.
3. The parking lights will flash and the siren will chirp 6 times indicating daily start mode has been
activated.
To cancel daily start, start the vehicle manually.
Using the Safety (Red Handled) Control Switch
Thesafety (red handled) control switch allows you to temporarily disable the remote vehicle starter feature,thisis
especiallyhelpfulwhenhaving your vehicleservicedor valet parked. Todisabletheremote start,move thesafety
(redhandled)control switch to the OFF position.
Remote Start Safety Features
Forsafety and security reasons, the systemwillshutdownor prevent the remote vehicle starter fromactivatingif
anyof the following occur:
1. Thevehicle’shoodisopen.
2. Thebrake pedal is pressed prior to turning theignition key to the ON position.
3. Theengine reaches 3 times its normal idle speed.
4. Thesafety(redhandled)controlswitchis moved to the OFF position.
TheTurbo Timer feature keeps the vehicle running after arriving at your destinationforapreprogrammed amount
oftime to cooldownthe vehicle’s turboafteryou have left thevehicle.
To engage the turbo timer feature:
1. With thevehiclerunning via the ignitionkey,and yourfootoffof the brake pedal.
2. Engagethevehicle’sparking brake.
3. Scroll to vehicle menu 5 and select TURBO TIMER or press and release the UNLOCK and STAR
buttonsatthesame time.
4. The parking lights will turn on indicating that the turbo time is active.
5.Turnthe ignition key OFF, the vehicle will continue to run for the preset time.
To disengage the turbo timer feature:
1. Pressthe vehicle’s brake pedal.
Or
2. Pressthe STARbutton2times.
Using the Optional Turbo Timer Feature

19
Page Call Out
Fromwithin the vehicle, pressandhold the emergency overridebuttonfor 4 seconds, the
2-way remotecontrol will emit a beep and the vehicle call pagewillbedisplayedto
indicatethat someone is calling you tothevehicle.
Additional System Features
Check Vehicle Status
Tocheckthevehicle status, scroll to vehicle menu 4 and selectSTATUSCHECK.
Check Temperature
Thetemperature is displayed on the main pagebutcanalso be updated by scrolling to
vehicle menu 4 and selecting MONITORTEMP.
Trigger Check
Tocheckthe triggered eventsscroll to vehiclemenu 4 and selectTRIGGER CHECK.
1-Way Remote Control Transmitter
The1-way transmitter can operateupto 2 vehicles, theadditionalvehicle must also havethissystem installed and
thetransmitter programmed to it. For 2nd vehicle operation:
1. Press the “IIII
IIII
II“ button, the LED on the transmitter will turn on for 3.5 seconds.
2.While the LED is on, press the desired button to control the 2nd vehicle.
Notethat for the 1-waytransmitteryou will need to dostep1 each time you wishtouse the transmitter withthe2nd
vehicle
2-Way Remote Control Transmitter
The2-way transmitter can operateupto 4 vehicles, theadditionalvehicles must also havethissystem installed and
thetransmitterprogrammed to it. For 2nd, 3rd or 4th vehicle operation scroll to vehicle menu 6 and select the
vehicle.The vehicles are represented by TX1, TX2, TX3and TX4,onceselected the main page will display the
newvehicle.
Multiple Vehicle Operation

20
Anti Hi-Jack
Active Anti Hi-Jack
WhenActive Anti Hi-Jack is selected it must be activatedbythetransmittereach time it is needed.
1. While the ignition is ON, scroll to vehicle menu 1 and select CAR JACKING or press simultaneously
pressSTARTand UNLOCK for 5 seconds.
2. If the vehicle’s door is opened and closed while the ignition is ON, anti hi-jack will be triggered.
Passive Anti Hi-Jack
WhenPassiveAnti Hi-Jack is selected it is activated each time the ignition isturnedon.
1. Turn the ignition ON.
2. If the vehicle’s door is opened and closed while the ignition is ON, anti hi-jack will be triggered.
Anti Hi-Jack Trigger Sequence
1.50 seconds after the anti hi-jackhas been triggered the siren will chirp for 15 seconds.
2.During this 15 second period of chirpingpushing the valet button 1 time willcancel anti hi-jack.
3.After65 seconds the siren and parking lights go into alarm mode.
4.After 90 seconds the starterkill will activate to prevent thevehiclefrom be re-started if it is shut off, hi-
jackmode will remain active untill thevehicle’sbatterypower is drained.
Anti Hi-Jack Override
Turnthe ignition from OFF to ON and within 10 seconds push the emergency override button. Notethat
ifyou are using the codedoverridemethod you will need toenterthe pin number at thistime.
Anti Hi-Jack Mode
Quick Reference Operation Guide
Vehicle horn/siren chirps and parking light flashes.
System LED light flashes.
LED Function LED Function
Off Disarmed 1 flash...
pause
Zone 1 / Trigger on Hood
Slow
Flash
Armed 2 flashes...
pause
Zone 2 / Trigger on Trunk
Fast
Flash
Passive Arming 3 flashes...
pause
Zone 3 / Trigger on Door
Switch
On (Solid) Valet Mode 4 flashes...
pause
Zone 4 / Trigger on Shock
Sensor
5 flashes...
pause
Zone 5 / Trigger on Ignition
Switch
6 flashes...
pause
Zone 6 / Trigger on Optional
Sensor
Chirp Function Parking light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2 flashes Disarm
3 chirps Door Ajar Warning 3 flashes Disarm / Triggered
4 chirps Disarm / Triggered 5 flashes Car Locator
5 chirps Car Locator Constant On Under Remote Start