Code 2600 Quick setup guide

CR1000, CR1400 & CR2600
MCKESSON PARAGON
Integration Guide
Configuration Guidewww.codecorp.com YouTube.com/codecorporation
Dedicated to
Workstationon Wheels
Dedicated to
Clinician
Dedicated to
Patient Room
To configure a CR1000 or CR1400 to be dedicated to a patient room or
workstation on wheels, scan the following barcode:
Scan the preferred CR2600 workflow configuration setting barcode:
Configuring CR1000 and CR1400 Barcode Readers
Configuring a CR2600 Barcode Reader
VERSION 02 – RELEASE DATE: MARCH 2016
Dedicated to Patient Room or
Workstationon Wheels
- Not Compatible with Other Models -

D007126_02 McKesson Paragon Integration Guide
Vibrate On/
Beep On
Reset CR1000/CR1400 to
Factory Default Settings
Reset CR2600 to
Factory Default Settings
Vibrate On/
Beep Off
Vibrate Off/
Beep On
Clear all JavaScript Rules
Scan the preferred feedback setting:
Note: The CR1000 does nothave a vibration feature. To change the beep volume,
download the CR1000 Configuration Guide from www.codecorp.com.
Scan the preferred configuration setting:
Scan the following barcodes to identify firmware versions:
CR1400 and CR2600 Feedback Settings
CR1000, CR1400 and CR2600 Reader Settings
Firmware Version Information
Ignore Second
Barcode on IV Bag
Modem Firmware
VersionInformation
Reader Firmware
Version Information