Code Cr1100 User manual

CR1100

BARCODE READ I N G

Configuration barcodes generated based on current firmware versions

WEB GENERATED

4-17-2020

communication-mode-settings.......................................................................................................................................9

Enable IBM surePOS mode M2............................................................................................................................................................9 (A2)

Enable Packet Mode M2.......................................................................................................................................................................9 (A3)

Enable Raw Mode - Default M2.........................................................................................................................................................9 (A4)

custom-terminal-settings...............................................................................................................................................9

Disable Gilbarco - Default M2............................................................................................................................................................9 (B2)

Disable NCR - Default M2...................................................................................................................................................................9 (B3)

Disable NCR2 - Default M2.................................................................................................................................................................9 (B4)

Disable WINCNIX - Default M2............................................................................................................................................................9 (C2)

Enable Gilbarco M2...............................................................................................................................................................................9 (C3)

Enable NCR M2.....................................................................................................................................................................................9 (C4)

Enable NCR2 M2...................................................................................................................................................................................9 (D2)

Enable Verifone (Ruby) Defaults M2...................................................................................................................................................9 (D3)

Enable WINCNIX M2..............................................................................................................................................................................9 (D4)

data-formatting-prefix-suffix-settings...........................................................................................................................9

Convert Barcode Data to Bracketed Hex Output M2........................................................................................................................9 (E2)

Convert Barcode Data to Lowercase M2............................................................................................................................................9 (E3)

Convert Barcode Data to Uppercase M2............................................................................................................................................9 (E4)

Disable Data Formatting - Default M2..............................................................................................................................................10 (A2)

Erase Prefix & Suffix Data M2...........................................................................................................................................................10 (A3)

Erase Prefix Data M2...........................................................................................................................................................................10 (A4)

Erase Suffix Data M2...........................................................................................................................................................................10 (B2)

Prefix AIM ID Off - Default M2..........................................................................................................................................................10 (B3)

Prefix AIM ID On M2............................................................................................................................................................................10 (B4)

Prefix Comma M2..................................................................................................................................................................................10 (C2)

Prefix Space M2....................................................................................................................................................................................10 (C3)

Prefix Tab (RS232 Mode Only) M2......................................................................................................................................................10 (C4)

Prefix Tab (USB Keyboard Mode Only) M2.........................................................................................................................................10 (D2)

Suffix Carriage Return (RS232 Mode Only) M2.................................................................................................................................10 (D3)

Suffix Carriage Return Line Feed (RS232 Mode Only) - Default M2.............................................................................................10 (D4)

Suffix Comma M2..................................................................................................................................................................................10 (E2)

Suffix Enter (USB Keyboard Mode Only) M2......................................................................................................................................10 (E3)

Suffix Line Feed (RS232 Mode Only) M2...........................................................................................................................................10 (E4)

Suffix Space M2....................................................................................................................................................................................11 (A2)

Suffix Tab (RS232 Mode Only) M2.....................................................................................................................................................11 (A3)

Suffix Tab (USB Keyboard Mode Only) M2.........................................................................................................................................11 (A4)

data-validation................................................................................................................................................................11

Enable ISO15434 & ISO15418 Validation M2....................................................................................................................................11 (B2)

Enable ISO15434 Validation M2..........................................................................................................................................................11 (B3)

Enable UDI/HIBC Validation M2...........................................................................................................................................................11 (B4)

general-reading-mode-settings.....................................................................................................................................11

500 ms Scan Delay with Motion Detection in stand - Default M2..............................................................................................11 (C2)

Beep Volume 0% M2............................................................................................................................................................................11 (C3)

Beep Volume 100% - Default M2......................................................................................................................................................11 (C4)

Beep Volume 33% M2..........................................................................................................................................................................11 (D2)

Beep Volume 67% M2..........................................................................................................................................................................11 (D3)

Continuous Scan Mode On In Stand M2...........................................................................................................................................11 (D4)

Continuous Scan Mode On M2............................................................................................................................................................11 (E2)

Disable Cell Phone Reading Enhancement - Default M2.................................................................................................................11 (E3)

Disable Stand Detection M2.................................................................................................................................................................11 (E4)

Disable Target LED During Image Capture M2.................................................................................................................................12 (A2)

Disable Targeting-Always-On M2..........................................................................................................................................................12 (A3)

Enable Cell Phone Reading Enhancement M2...................................................................................................................................12 (A4)

Enable Stand Detection - Default M2................................................................................................................................................12 (B2)

Enable Target LED During Image Capture - Default M2.................................................................................................................12 (B3)

Enable Targeting-Always-On M2...........................................................................................................................................................12 (B4)

Motion Detect Always On M2...............................................................................................................................................................12 (C2)

Motion Detect or Continuous Scan Off (Out of Stand) - Default M2...........................................................................................12 (C3)

Motion Detection On In Stand - Default M2.....................................................................................................................................12 (C4)

Reader Raw Text Commands Off - Default M2................................................................................................................................12 (D2)

Reader Raw Text Commands On M2..................................................................................................................................................12 (D3)

Set Motion Detect Maximum Brightness to 100% - Default M2....................................................................................................12 (D4)

Set Motion Detect Maximum Brightness to 25% M2.......................................................................................................................12 (E2)

Set Motion Detect Maximum Brightness to 50% M2.......................................................................................................................12 (E3)

Set Motion Detect Maximum Brightness to 75% M2.......................................................................................................................12 (E4)

Trigger Mode On In Stand M2............................................................................................................................................................13 (A2)

keyboard-language-settings...........................................................................................................................................13

Control Character Input - Alt + Keypad M2.....................................................................................................................................13 (B2)

Control Character Input - Ctrl + Character M2...............................................................................................................................13 (B3)

Control Character Input - Language Default - Default M2..........................................................................................................13 (B4)

Control Character Input -Alt + Leading Zero M2.............................................................................................................................13 (C2)

Data Encoding: Raw ASCII to Keyboard XML File Lookup - Default M2.......................................................................................13 (C3)

Data Encoding: UTF8 to Unicode Codepoint - Alt Sequences for Windows M2............................................................................13 (C4)

Get Active Language M2......................................................................................................................................................................13 (D2)

Keyboard Support: English Keyboard Mapping for Apple M2...........................................................................................................13 (D3)

Keyboard Support: French Keyboard Mapping for Apple M2............................................................................................................13 (D4)

Keyboard Support: French Keyboard Mapping for Windows M2.......................................................................................................13 (E2)

Keyboard Support: French-Belgian Keyboard Mapping for Windows M2..........................................................................................13 (E3)

Keyboard Support: German Keyboard Mapping for Apple M2...........................................................................................................13 (E4)

Keyboard Support: German Keyboard Mapping for Windows M2......................................................................................................14 (A2)

Keyboard Support: German-Swiss Keyboard Mapping for Apple M2................................................................................................14 (A3)

Keyboard Support: German-Swiss Keyboard Mapping for Windows M2...........................................................................................14 (A4)

Keyboard Support: Italian Keyboard Mapping for Apple M2.............................................................................................................14 (B2)

Keyboard Support: Japanese Keyboard Mapping for Windows M2...................................................................................................14 (B3)

Keyboard Support: Russian Keyboard Mapping for Windows M2.....................................................................................................14 (B4)

Keyboard Support: Simplified Chinese Keyboard Mapping for Windows M2...................................................................................14 (C2)

Keyboard Support: Spanish Keyboard Mapping for Apple M2..........................................................................................................14 (C3)

Keyboard Support: Spanish Keyboard Mapping for Windows M2.....................................................................................................14 (C4)

Keyboard Support: Spanish-Latin American Keyboard Mapping for Windows M2...........................................................................14 (D2)

Keyboard Support: UK English Keyboard Mapping for Windows M2................................................................................................14 (D3)

Keyboard Support: US English Keyboard Mapping for Windows - Default M2..............................................................................14 (D4)

Keyboard Support: US International (Universal) Keyboard Mapping for Windows M2....................................................................14 (E2)

List Installed Languages M2................................................................................................................................................................14 (E3)

Set Italian for Windows as active language M2..............................................................................................................................14 (E4)

Set Portuguese for Windows as active language M2.......................................................................................................................15 (A2)

miscellaneous-settings...................................................................................................................................................15

Disable Upload Image Mode - Default M2........................................................................................................................................15 (B2)

Enable Upload Image Mode M2..........................................................................................................................................................15 (B3)

operating-system-settings..............................................................................................................................................15

Alternate Operating System (Linux/Mac) Off - Default M2..............................................................................................................15 (C2)

Alternate Operating System (Linux/Mac) On M2................................................................................................................................15 (C3)

reader-modem-command-settings................................................................................................................................15

Get Reader Parameters M2..................................................................................................................................................................15 (D2)

Output Reader Configuration M2.........................................................................................................................................................15 (D3)

Reader Information, limited M2...........................................................................................................................................................15 (D4)

reset-clear-and-save-reader-settings...........................................................................................................................15

Reboot Reader (RCSRS) M2.................................................................................................................................................................15 (E2)

Reset to Factory Defaults M2..............................................................................................................................................................15 (E3)

Save All Reader Settings M2...............................................................................................................................................................15 (E4)

rs232-settings.................................................................................................................................................................16

Enable RS232 Interface Flow Control - One-Way M2.......................................................................................................................16 (A2)

Enable Serial, Raw, and Echo Communications M2.........................................................................................................................16 (A3)

Reset to RS232 Factory Defaults M2.................................................................................................................................................16 (A4)

RS232 Interface - 1 Stop Bit - Default M2.....................................................................................................................................16 (B2)

RS232 Interface - 115200 Baud Rate - Default M2.......................................................................................................................16 (B3)

RS232 Interface - 1200 Baud Rate M2............................................................................................................................................16 (B4)

RS232 Interface - 19200 Baud Rate M2..........................................................................................................................................16 (C2)

RS232 Interface - 2 Stop Bits M2.....................................................................................................................................................16 (C3)

RS232 Interface - 2400 Baud Rate M2............................................................................................................................................16 (C4)

RS232 Interface - 38400 Baud Rate M2..........................................................................................................................................16 (D2)

RS232 Interface - 4800 Baud Rate M2............................................................................................................................................16 (D3)

RS232 Interface - 57600 Baud Rate M2..........................................................................................................................................16 (D4)

RS232 Interface - 7 Data Bits M2....................................................................................................................................................16 (E2)

RS232 Interface - 8 Data Bits - Default M2...................................................................................................................................16 (E3)

RS232 Interface - 9600 Baud Rate M2............................................................................................................................................16 (E4)

RS232 Interface - Even Parity M2......................................................................................................................................................17 (A2)

RS232 Interface - No Parity M2.........................................................................................................................................................17 (A3)

RS232 Interface - Odd Parity M2.......................................................................................................................................................17 (A4)

RS232 Interface Flow Control Off - Default M2...............................................................................................................................17 (B2)

RS232 Interface Flow Control On M2.................................................................................................................................................17 (B3)

scan-delay-settings........................................................................................................................................................17

1 Day Duplicate Scan Delay M2.........................................................................................................................................................17 (C2)

1 Hour Duplicate Scan Delay M2.......................................................................................................................................................17 (C3)

1 Second Duplicate Scan Delay M2...................................................................................................................................................17 (C4)

10 Second Duplicate Scan Delay M2.................................................................................................................................................17 (D2)

2 Second Duplicate Scan Delay M2...................................................................................................................................................17 (D3)

3 Second Duplicate Scan Delay M2...................................................................................................................................................17 (D4)

30 Second Duplicate Scan Delay M2.................................................................................................................................................17 (E2)

5 Second Duplicate Scan Delay M2...................................................................................................................................................17 (E3)

Disable Duplicate Scan Delay - Default M2......................................................................................................................................17 (E4)

symbology-settings.........................................................................................................................................................18

Do Not Convert EAN-8 to EAN-13 - Default M2............................................................................................................................18 (A2)

Australian Post Off - Default M2.......................................................................................................................................................18 (A3)

Australian Post On M2.........................................................................................................................................................................18 (A4)

Aztec Inverse & Normal On M2..........................................................................................................................................................18 (B2)

Aztec Inverse Off - Default M2...........................................................................................................................................................18 (B3)

Aztec Mirror Off - Default M2.............................................................................................................................................................18 (B4)

Aztec Mirror On M2...............................................................................................................................................................................18 (C2)

Aztec Off M2..........................................................................................................................................................................................18 (C3)

Aztec On - Default M2.........................................................................................................................................................................18 (C4)

BC412 Off - Default M2......................................................................................................................................................................18 (D2)

BC412 On M2........................................................................................................................................................................................18 (D3)

Canada Post Off - Default M2...........................................................................................................................................................18 (D4)

Canada Post On M2.............................................................................................................................................................................18 (E2)

Codabar Checksum Off - Default M2.................................................................................................................................................18 (E3)

Codabar Checksum On M2...................................................................................................................................................................18 (E4)

Codabar Off M2.....................................................................................................................................................................................19 (A2)

Codabar On - Default M2....................................................................................................................................................................19 (A3)

Codablock F Off - Default M2............................................................................................................................................................19 (A4)

Codablock F On M2..............................................................................................................................................................................19 (B2)

Code 11 Checksum Stripped from Result Off - Default M2...........................................................................................................19 (B3)

Code 11 Checksum Stripped from Result On M2.............................................................................................................................19 (B4)

Code 11 Disable Checksum Checking - Default M2........................................................................................................................19 (C2)

Code 11 Off - Default M2..................................................................................................................................................................19 (C3)

Code 11 On M2....................................................................................................................................................................................19 (C4)

Code 11 One Digit Checksum M2......................................................................................................................................................19 (D2)

Code 11 Two Digit Checksum - Default M2.....................................................................................................................................19 (D3)

Code 128 Off M2..................................................................................................................................................................................19 (D4)

Code 128 On - Default M2.................................................................................................................................................................19 (E2)

Code 32 (Italian Pharmacode) Off - Default M2..............................................................................................................................19 (E3)

Code 32 (Italian Pharmacode) On M2................................................................................................................................................19 (E4)

Code 39 Checksum Off - Default M2................................................................................................................................................20 (A2)

Code 39 Checksum On M2..................................................................................................................................................................20 (A3)

Code 39 Checksum Stripped from Result On M2.............................................................................................................................20 (A4)

Code 39 Extended Full ASCII Off - Default M2...............................................................................................................................20 (B2)

Code 39 Extended Full ASCII On M2.................................................................................................................................................20 (B3)

Code 39 Off M2....................................................................................................................................................................................20 (B4)

Code 39 On - Default M2...................................................................................................................................................................20 (C2)

Code 49 Off - Default M2..................................................................................................................................................................20 (C3)

Code 49 On M2....................................................................................................................................................................................20 (C4)

Code 93 Off M2....................................................................................................................................................................................20 (D2)

Code 93 On - Default..........................................................................................................................................................................20 (D3)

Composite Off - Default M2................................................................................................................................................................20 (D4)

Composite On M2..................................................................................................................................................................................20 (E2)

Convert Bookland EAN-13 to ISBN M2...............................................................................................................................................20 (E3)

Convert Bookland EAN-13 to ISSN M2...............................................................................................................................................20 (E4)

Convert EAN-8 to EAN-13 M2..............................................................................................................................................................21 (A2)

Convert UPC-A to EAN-13 M2.............................................................................................................................................................21 (A3)

Custom QR Code Off - Default M2....................................................................................................................................................21 (A4)

Custom QR Code On M2......................................................................................................................................................................21 (B2)

Data Matrix Inverse and Normal On - Default M2..........................................................................................................................21 (B3)

Data Matrix Inverse Off M2.................................................................................................................................................................21 (B4)

Data Matrix Mirror Off - Default M2.................................................................................................................................................21 (C2)

Data Matrix Mirror On M2...................................................................................................................................................................21 (C3)

Data Matrix Off M2..............................................................................................................................................................................21 (C4)

Data Matrix On - Default M2.............................................................................................................................................................21 (D2)

Data Matrix Rectangular Extended Off - Default M2.......................................................................................................................21 (D3)

Data Matrix Rectangular Extended On M2.........................................................................................................................................21 (D4)

Data Matrix Rectangular Off M2.........................................................................................................................................................21 (E2)

Data Matrix Rectangular On - Default M2........................................................................................................................................21 (E3)

Disable BC412 Regular and Reverse - Default M2..........................................................................................................................21 (E4)

Disable GS1 DataBar Expanded M2....................................................................................................................................................22 (A2)

Disable GS1 DataBar Expanded Stacked M2.....................................................................................................................................22 (A3)

Disable GS1 DataBar Limited M2.......................................................................................................................................................22 (A4)

Disable GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional M2.............................................................................22 (B2)

Do Not Convert Bookland EAN-13 to ISBN - Default M2................................................................................................................22 (B3)

Do Not Convert Bookland EAN-13 to ISSN - Default M2................................................................................................................22 (B4)

Do Not Convert UPC-A to EAN-13 - Default M2..............................................................................................................................22 (C2)

Do Not Transmit EAN-13 Check Digit - Default M2........................................................................................................................22 (C3)

Do Not Transmit EAN-8 Check Digit - Default M2..........................................................................................................................22 (C4)

Do Not Transmit UPC-A Check Digit - Default M2..........................................................................................................................22 (D2)

Do Not Transmit UPC-A Number System - Default M2...................................................................................................................22 (D3)

Do Not Transmit UPC-E Check Digit - Default M2..........................................................................................................................22 (D4)

Do Not Transmit UPC-E Number System - Default M2...................................................................................................................22 (E2)

Enable BC412 - Disable BC412 Reverse M2....................................................................................................................................22 (E3)

Enable GoCode & GoCode Mirror Decoding M2.................................................................................................................................22 (E4)

Enable GS1 DataBar Expanded - Default M2...................................................................................................................................23 (A2)

Enable GS1 DataBar Expanded Stacked - Default M2.....................................................................................................................23 (A3)

Enable GS1 DataBar Limited - Default M2.......................................................................................................................................23 (A4)

Enable GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional - Default M2............................................................23 (B2)

Grid Matrix Inverse Off - Default M2................................................................................................................................................23 (B3)

Grid Matrix Inverse On M2..................................................................................................................................................................23 (B4)

Grid Matrix Mirror Off - Default M2..................................................................................................................................................23 (C2)

Grid Matrix Mirror On M2....................................................................................................................................................................23 (C3)

Grid Matrix Off - Default M2..............................................................................................................................................................23 (C4)

Grid Matrix On M2................................................................................................................................................................................23 (D2)

GS1 DataBar Off M2............................................................................................................................................................................23 (D3)

GS1 DataBar On - Default M2...........................................................................................................................................................23 (D4)

Han Xin Inverse Off - Default M2.....................................................................................................................................................23 (E2)

Han Xin Inverse On M2.......................................................................................................................................................................23 (E3)

Han Xin Mirror Off - Default M2.......................................................................................................................................................23 (E4)

Han Xin Mirror On M2.........................................................................................................................................................................24 (A2)

Han Xin Normal and Inverse On M2..................................................................................................................................................24 (A3)

Han Xin Off - Default M2...................................................................................................................................................................24 (A4)

Han Xin On M2.....................................................................................................................................................................................24 (B2)

Hong Kong 2 of 5 Off - Default M2.................................................................................................................................................24 (B3)

Hong Kong 2 of 5 On M2...................................................................................................................................................................24 (B4)

Interleaved 2 of 5 Checksum Off - Default M2...............................................................................................................................24 (C2)

Interleaved 2 of 5 Checksum On M2.................................................................................................................................................24 (C3)

Interleaved 2 of 5 Checksum Stripped from Result Off - Default M2.........................................................................................24 (C4)

Interleaved 2 of 5 Checksum Stripped from Result On M2...........................................................................................................24 (D2)

Interleaved 2 of 5 Off M2...................................................................................................................................................................24 (D3)

Interleaved 2 of 5 On - Default M2..................................................................................................................................................24 (D4)

Japan Post Off - Default M2..............................................................................................................................................................24 (E2)

Japan Post On M2................................................................................................................................................................................24 (E3)

Keep Codabar Start and Stop Delimiters - Default M2...................................................................................................................24 (E4)

Keep Trioptic Start and Stop Delimiters M2......................................................................................................................................25 (A2)

KIX (Dutch Post) Off - Default M2....................................................................................................................................................25 (A3)

KIX (Dutch Post) On M2......................................................................................................................................................................25 (A4)

Korean Post Off - Default M2.............................................................................................................................................................25 (B2)

Korean Post On M2...............................................................................................................................................................................25 (B3)

Matrix 2 of 5 Off - Default M2.........................................................................................................................................................25 (B4)

Matrix 2 of 5 On M2...........................................................................................................................................................................25 (C2)

Maxicode Off - Default M2..................................................................................................................................................................25 (C3)

Maxicode On M2....................................................................................................................................................................................25 (C4)

Micro PDF417 Off - Default M2..........................................................................................................................................................25 (D2)

Micro PDF417 On M2............................................................................................................................................................................25 (D3)

Micro QR Code Off - Default M2.......................................................................................................................................................25 (D4)

Micro QR Code On M2.........................................................................................................................................................................25 (E2)

Mode 1 QR Code Off - Default M2...................................................................................................................................................25 (E3)

Mode 1 QR Code On M2.....................................................................................................................................................................25 (E4)

MSI Plessey Checksum Must Be Mod 10 M2....................................................................................................................................26 (A2)

MSI Plessey Checksum Must Be Mod 10/10 M2..............................................................................................................................26 (A3)

MSI Plessey Checksum Must Be Mod 11/10 M2..............................................................................................................................26 (A4)

MSI Plessey Checksum Off - Default M2..........................................................................................................................................26 (B2)

MSI Plessey Checksum Stripped from Result Off - Default M2.....................................................................................................26 (B3)

MSI Plessey Checksum Stripped from Result On M2.......................................................................................................................26 (B4)

MSI Plessey Off - Default M2.............................................................................................................................................................26 (C2)

MSI Plessey On M2...............................................................................................................................................................................26 (C3)

NEC 2 of 5 Checksum Off M2...........................................................................................................................................................26 (C4)

NEC 2 of 5 Checksum On - Default M2..........................................................................................................................................26 (D2)

NEC 2 of 5 Off - Default M2............................................................................................................................................................26 (D3)

NEC 2 of 5 On M2..............................................................................................................................................................................26 (D4)

Output Telepen as ASCII M2...............................................................................................................................................................26 (E2)

Output Telepen as Numeric - Default M2.........................................................................................................................................26 (E3)

PDF417 Off M2......................................................................................................................................................................................26 (E4)

PDF417 On - Default M2.....................................................................................................................................................................27 (A2)

Pharmacode Color Off - Default M2...................................................................................................................................................27 (A3)

Pharmacode Color On M2.....................................................................................................................................................................27 (A4)

Pharmacode Normal Barcode Decoding (Left to Right) - Default M2............................................................................................27 (B2)

Pharmacode Off - Default M2.............................................................................................................................................................27 (B3)

Pharmacode On M2...............................................................................................................................................................................27 (B4)

Pharmacode Reverse Barcode Decoding (Right to Left) M2............................................................................................................27 (C2)

QR Code Inverse and Normal On M2.................................................................................................................................................27 (C3)

QR Code Inverse Only M2....................................................................................................................................................................27 (C4)

QR Code Mirror Off - Default M2......................................................................................................................................................27 (D2)

QR Code Mirror On M2........................................................................................................................................................................27 (D3)

QR Code Off M2...................................................................................................................................................................................27 (D4)

QR Code On - Default M2..................................................................................................................................................................27 (E2)

QR Code Standard Only - Default M2...............................................................................................................................................27 (E3)

Reboot Reader M2.................................................................................................................................................................................27 (E4)

Remove Codabar Start and Stop Delimiters M2...............................................................................................................................28 (A2)

Remove Trioptic Start and Stop Delimiters - Default M2...............................................................................................................28 (A3)

Reverse BC412 Off - Default M2.......................................................................................................................................................28 (A4)

Reverse BC412 On M2.........................................................................................................................................................................28 (B2)

Reverse Trioptic Off - Default M2......................................................................................................................................................28 (B3)

Reverse Trioptic On M2........................................................................................................................................................................28 (B4)

Royal Mail Checksum Off M2..............................................................................................................................................................28 (C2)

Royal Mail Checksum On M2..............................................................................................................................................................28 (C3)

Straight 2 of 5 Off - Default M2......................................................................................................................................................28 (C4)

Straight 2 of 5 On M2........................................................................................................................................................................28 (D2)

Telepen Off - Default M2....................................................................................................................................................................28 (D3)

Telepen On M2......................................................................................................................................................................................28 (D4)

Transmit EAN-13 Check Digit M2.......................................................................................................................................................28 (E2)

Transmit EAN-8 Check Digit M2.........................................................................................................................................................28 (E3)

Transmit UPC-A Check Digit M2.........................................................................................................................................................28 (E4)

Transmit UPC-A Number System M2...................................................................................................................................................29 (A2)

Transmit UPC-E Check Digit M2.........................................................................................................................................................29 (A3)

Transmit UPC-E Number System On M2............................................................................................................................................29 (A4)

Trioptic Off - Default M2.....................................................................................................................................................................29 (B2)

Trioptic On M2.......................................................................................................................................................................................29 (B3)

UK Plessey Off - Default M2..............................................................................................................................................................29 (B4)

UK Plessey On M2................................................................................................................................................................................29 (C2)

UK Royal Mail Off - Default M2........................................................................................................................................................29 (C3)

UK Royal Mail On M2..........................................................................................................................................................................29 (C4)

UPC E Expansion Off - Default M2...................................................................................................................................................29 (D2)

UPC E Expansion On M2.....................................................................................................................................................................29 (D3)

UPC Supplemental Off - Default M2..................................................................................................................................................29 (D4)

UPC Supplemental On M2....................................................................................................................................................................29 (E2)

UPC/EAN Off M2....................................................................................................................................................................................29 (E3)

UPC/EAN On - Default M2...................................................................................................................................................................29 (E4)

UPU ID Tags Off - Default M2...........................................................................................................................................................30 (A2)

UPU ID Tags On M2.............................................................................................................................................................................30 (A3)

USPS Intelligent Mail Off - Default M2.............................................................................................................................................30 (A4)

USPS Intelligent Mail On M2...............................................................................................................................................................30 (B2)

USPS Planet Off - Default M2............................................................................................................................................................30 (B3)

USPS Planet On M2..............................................................................................................................................................................30 (B4)

USPS Postnet Off - Default M2..........................................................................................................................................................30 (C2)

USPS Postnet On M2............................................................................................................................................................................30 (C3)

usb-settings.....................................................................................................................................................................30

Enable CDC VCOM Mode M2...............................................................................................................................................................30 (D2)

Enable HID POS Mode M2...................................................................................................................................................................30 (D3)

Enable USB VCOM mode M2...............................................................................................................................................................30 (D4)

Set reader into USB Full Speed mode M2........................................................................................................................................30 (E2)

Set reader into USB High Speed mode - Default M2.....................................................................................................................30 (E3)

USB HID Vendor Mode M2...................................................................................................................................................................30 (E4)

USB Keyboard Mode - Default M2......................................................................................................................................................31 (A2)

USB Virtual COM Common Ports M2..................................................................................................................................................31 (A3)

USB Virtual COM Multiple Ports M2...................................................................................................................................................31 (A4)

communication-mode-

settings

Enable IBM surePOS mode M2 Enable Packet Mode M2 Enable Raw Mode - Default M2

custom-terminal-settings

Disable Gilbarco - Default M2 Disable NCR - Default M2 Disable NCR2 - Default M2

custom-terminal-settings

Disable WINCNIX - Default M2 Enable Gilbarco M2 Enable NCR M2

custom-terminal-settings

Enable NCR2 M2 Enable Verifone (Ruby) Defaults M2 Enable WINCNIX M2

data-formatting-prefix-

suffix-settings

Convert Barcode Data to Bracketed

Hex Output M2

Convert Barcode Data to Lowercase

Convert Barcode Data to Uppercase

13898 Configuration Guide

data-formatting-prefix-

suffix-settings

Disable Data Formatting - Default M2 Erase Prefix & Suffix Data M2 Erase Prefix Data M2

data-formatting-prefix-

suffix-settings

Erase Suffix Data M2 Prefix AIM ID Off - Default M2 Prefix AIM ID On M2

data-formatting-prefix-

suffix-settings

Prefix Comma M2 Prefix Space M2 Prefix Tab (RS232 Mode Only) M2

data-formatting-prefix-

suffix-settings

Prefix Tab (USB Keyboard Mode Only)

Suffix Carriage Return (RS232 Mode

Only) M2

Suffix Carriage Return Line Feed

(RS232 Mode Only) - Default M2

data-formatting-prefix-

suffix-settings

Suffix Comma M2 Suffix Enter (USB Keyboard Mode Only)

Suffix Line Feed (RS232 Mode Only)

13898 Configuration Guide

data-formatting-prefix-

suffix-settings

Suffix Space M2 Suffix Tab (RS232 Mode Only) M2 Suffix Tab (USB Keyboard Mode Only)

data-validation

Enable ISO15434 & ISO15418 Validation

Enable ISO15434 Validation M2 Enable UDI/HIBC Validation M2

general-reading-mode-

settings

500 ms Scan Delay with Motion

Detection in stand - Default M2

Beep Volume 0% M2 Beep Volume 100% - Default M2

general-reading-mode-

settings

Beep Volume 33% M2 Beep Volume 67% M2 Continuous Scan Mode On In Stand M2

general-reading-mode-

settings

Continuous Scan Mode On M2 Disable Cell Phone Reading

Enhancement - Default M2

Disable Stand Detection M2

13898 Configuration Guide

general-reading-mode-

settings

Disable Target LED During Image

Capture M2

Disable Targeting-Always-On M2 Enable Cell Phone Reading

Enhancement M2

general-reading-mode-

settings

Enable Stand Detection - Default M2 Enable Target LED During Image

Capture - Default M2

Enable Targeting-Always-On M2

general-reading-mode-

settings

Motion Detect Always On M2 Motion Detect or Continuous Scan Off

(Out of Stand) - Default M2

Motion Detection On In Stand - Default

general-reading-mode-

settings

Reader Raw Text Commands Off -

Default M2

Reader Raw Text Commands On M2 Set Motion Detect Maximum Brightness

to 100% - Default M2

general-reading-mode-

settings

Set Motion Detect Maximum Brightness

to 25% M2

Set Motion Detect Maximum Brightness

to 50% M2

Set Motion Detect Maximum Brightness

to 75% M2

13898 Configuration Guide

general-reading-mode-

settings

Trigger Mode On In Stand M2

keyboard-language-settings

Control Character Input - Alt +

Keypad M2

Control Character Input - Ctrl +

Character M2

Control Character Input - Language

Default - Default M2

keyboard-language-settings

Control Character Input -Alt + Leading

Zero M2

Data Encoding: Raw ASCII to Keyboard

XML File Lookup - Default M2

Data Encoding: UTF8 to Unicode

Codepoint - Alt Sequences for Windows

keyboard-language-settings

Get Active Language M2 Keyboard Support: English Keyboard

Mapping for Apple M2

Keyboard Support: French Keyboard

Mapping for Apple M2

keyboard-language-settings

Keyboard Support: French Keyboard

Mapping for Windows M2

Keyboard Support: French-Belgian

Keyboard Mapping for Windows M2

Keyboard Support: German Keyboard

Mapping for Apple M2

13898 Configuration Guide

keyboard-language-settings

Keyboard Support: German Keyboard

Mapping for Windows M2

Keyboard Support: German-Swiss

Keyboard Mapping for Apple M2

Keyboard Support: German-Swiss

Keyboard Mapping for Windows M2

keyboard-language-settings

Keyboard Support: Italian Keyboard

Mapping for Apple M2

Keyboard Support: Japanese Keyboard

Mapping for Windows M2

Keyboard Support: Russian Keyboard

Mapping for Windows M2

keyboard-language-settings

Keyboard Support: Simplified Chinese

Keyboard Mapping for Windows M2

Keyboard Support: Spanish Keyboard

Mapping for Apple M2

Keyboard Support: Spanish Keyboard

Mapping for Windows M2

keyboard-language-settings

Keyboard Support: Spanish-Latin

American Keyboard Mapping for

Windows M2

Keyboard Support: UK English Keyboard

Mapping for Windows M2

Keyboard Support: US English Keyboard

Mapping for Windows - Default M2

keyboard-language-settings

Keyboard Support: US International

(Universal) Keyboard Mapping for

Windows M2

List Installed Languages M2 Set Italian for Windows as active

language M2

13898 Configuration Guide

keyboard-language-settings

Set Portuguese for Windows as active

language M2

miscellaneous-settings

Disable Upload Image Mode - Default

Enable Upload Image Mode M2

operating-system-settings

Alternate Operating System (Linux/Mac)

Off - Default M2

Alternate Operating System (Linux/Mac)

On M2

reader-modem-command-

settings

Get Reader Parameters M2 Output Reader Configuration M2 Reader Information, limited M2

reset-clear-and-save-

reader-settings

Reboot Reader (RCSRS) M2 Reset to Factory Defaults M2 Save All Reader Settings M2

13898 Configuration Guide

rs232-settings

Enable RS232 Interface Flow Control -

One-Way M2

Enable Serial, Raw, and Echo

Communications M2

Reset to RS232 Factory Defaults M2

rs232-settings

RS232 Interface - 1 Stop Bit - Default

RS232 Interface - 115200 Baud Rate -

Default M2

RS232 Interface - 1200 Baud Rate M2

rs232-settings

RS232 Interface - 19200 Baud Rate

RS232 Interface - 2 Stop Bits M2 RS232 Interface - 2400 Baud Rate M2

rs232-settings

RS232 Interface - 38400 Baud Rate

RS232 Interface - 4800 Baud Rate M2 RS232 Interface - 57600 Baud Rate

rs232-settings

RS232 Interface - 7 Data Bits M2 RS232 Interface - 8 Data Bits -

Default M2

RS232 Interface - 9600 Baud Rate M2

13898 Configuration Guide

rs232-settings

RS232 Interface - Even Parity M2 RS232 Interface - No Parity M2 RS232 Interface - Odd Parity M2

rs232-settings

RS232 Interface Flow Control Off -

Default M2

RS232 Interface Flow Control On M2

scan-delay-settings

1 Day Duplicate Scan Delay M2 1 Hour Duplicate Scan Delay M2 1 Second Duplicate Scan Delay M2

scan-delay-settings

10 Second Duplicate Scan Delay M2 2 Second Duplicate Scan Delay M2 3 Second Duplicate Scan Delay M2

scan-delay-settings

30 Second Duplicate Scan Delay M2 5 Second Duplicate Scan Delay M2 Disable Duplicate Scan Delay - Default

13898 Configuration Guide

symbology-settings

Do Not Convert EAN-8 to EAN-13 -

Default M2

Australian Post Off - Default M2 Australian Post On M2

symbology-settings

Aztec Inverse & Normal On M2 Aztec Inverse Off - Default M2 Aztec Mirror Off - Default M2

symbology-settings

268

Aztec Mirror On M2 Aztec Off M2 Aztec On - Default M2

symbology-settings

BC412 Off - Default M2 BC412 On M2 Canada Post Off - Default M2

symbology-settings

Canada Post On M2 Codabar Checksum Off - Default M2 Codabar Checksum On M2

13898 Configuration Guide

symbology-settings

Codabar Off M2 Codabar On - Default M2 Codablock F Off - Default M2

symbology-settings

Codablock F On M2 Code 11 Checksum Stripped from

Result Off - Default M2

Code 11 Checksum Stripped from

Result On M2

symbology-settings

Code 11 Disable Checksum Checking -

Default M2

Code 11 Off - Default M2 Code 11 On M2

symbology-settings

Code 11 One Digit Checksum M2 Code 11 Two Digit Checksum - Default

Code 128 Off M2

symbology-settings

Code 128 On - Default M2 Code 32 (Italian Pharmacode) Off -

Default M2

Code 32 (Italian Pharmacode) On M2

13898 Configuration Guide

symbology-settings

Code 39 Checksum Off - Default M2 Code 39 Checksum On M2 Code 39 Checksum Stripped from

Result On M2

symbology-settings

Code 39 Extended Full ASCII Off -

Default M2

Code 39 Extended Full ASCII On M2 Code 39 Off M2

symbology-settings

Code 39 On - Default M2 Code 49 Off - Default M2 Code 49 On M2

symbology-settings

Code 93 Off M2 Code 93 On - Default Composite Off - Default M2

symbology-settings

Composite On M2 Convert Bookland EAN-13 to ISBN M2 Convert Bookland EAN-13 to ISSN M2

Other manuals for CR1100

Table of contents

Code CR1100 User manual

Popular Barcode Reader manuals by other brands