Cole Parmer MasterFlex L/S 77200-00 User manual

[phone] | [email protected] | artisantg.com
-~
ARTISAN
®
~I
TECHNOLOGY
GROUP
Your definitive source
for
quality
pre-owned
equipment.
Artisan Technology
Group
Full-service,
independent
repair
center
with
experienced
engineers
and
technicians
on staff.
We
buy
your
excess,
underutilized,
and
idle
equipment
along
with
credit
for
buybacks
and
trade-ins
.
Custom
engineering
so
your
equipment
works
exactly as
you
specify.
•
Critical
and
expedited
services
•
Leasing
/
Rentals/
Demos
• In
stock/
Ready-to-ship
•
!TAR-certified
secure
asset
solutions
Expert
team
ITrust
guarantee
I
100%
satisfaction
All
tr
ademarks,
br
a
nd
names, a
nd
br
a
nd
s a
pp
earing here
in
are
th
e property of
th
e
ir
r
es
pecti
ve
ow
ner
s.
Find the Cole-Parmer 7015-20 at our website: Click HERE

Cole-Parmer Instrument Co.
625 East Bunker Court
Vernon Hills, Illinois U.S.A. 60061-1844
800-MASTERFLEX (627-8373)
[phone] (FAX)
www.masterflex.com
e-mail: techinf[email protected]
A-1299-0742
Edition 03
OPERATING MANUAL
COMPACT PUMP DRIVES
MODEL NOS.
77200-00
77200-10
77200-12
®
®
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

2
WARNING: PRODUCT USE LIMITATION
These products are not designed for, nor intended for use in patient-
connected applications, including, but not limited to, medical and dental
use and, accordingly, have not been submitted for FDA approval.
SAFETY PRECAUTIONS
CAUTIONS: Use of Pump Heads other than those specified will result
in unsatisfactory performance, damage to the drive unit
and voiding of applicable warranties.
The drive system can only be used with one Pump Head
at a time. Use of this drive unit with multiple Pump Heads
will result in unsatisfactory performance, damage to the
drive unit and voiding of applicable warranties.
When mounting the Pump Head to the drive unit, the
mounting screws should only be tightened fingertight.
Excessive tightening of the mounting screws will result
in binding and unsatisfactory performance.
WARNING: Be sure the Pump Drive is turned off before proceeding.
Loose clothing could be caught in the drive.
EU Declaration of Conformity
Name of Apparatus: MASTERFLEX®Compact L/S®PumpSystem
Model Numbers:77200-00,-10, -12
Description of Apparatus:VariableSpeed PeristalticPumpMotor Drive.Usedwithpump
headand tubing topump fluids.
77200-00 (115V AC), -10 (230V AC), -12 (12V DC)
BarnantCompanydeclares that the abovemodels are inconformity to thefollowing
harmonized standards and directives:
Applicable Applicable Manufacturer’s
Directives Specifications Report Number
89/336/EEC EN61326-1/A1:1998 TR9420
92/31/EEC
93/68/EEC
Manufacturer:
Barnant Company Division
Cole-Parmer InstrumentCompany
28W092CommercialAvenue
Barrington, IL 60010-2392
USA
Tel.:[phone]
Manufacturer’s Signature:
JamesW.Doll Date
VicePresident,Engineering
23August,2000
C-FLEX — Reg TM Consolidated Polymer Technologies, Inc.
Trademarks bearing the ®symbol in this publication
are registered in the U.S. and in other countries.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

3
INTRODUCTION AND GENERAL DESCRIPTION
The MASTERFLEX®L/S®COMPACT Pump Drives are designed as an inex-
pensivevariablespeeddrivewhichaccepts MASTERFLEX®L/S®STANDARD,
QUICK LOAD®and EASY-LOAD®Pump Heads. These 200 rpm drives ac-
commodate one Pump Head and one tube at controlled speed as low as
30 rpm. All units operate from an External Power Supply. The 115V AC and
230V AC models are supplied with an External Power Supply which provides
a DC output for connection to the Pump Drive.
Figure1. MASTERFLEX®L/S®Compact Pump Drive
The single-turn adjustable Speed Control, Figure 2, provides variable flow
operation.The green POWER On indicator lights whenever the pump is oper-
ating.The Power On/Direction Switch turns power on when either clockwise
or counterclockwise pump rotor direction is selected.The MAX Button is used
for priming and purging and operates the pump at maximum speed while
depressed.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

4
Figure 2. Pump Drive —Front Panel
The rear panel, Figure 3, contains a DC power input jack for connection of
primary power and a 4-terminal barrier strip for connection of remote start/
stop and for a DC backup supply.
Remote Start/Stop: Terminals 3 and 4 on the rear panel terminal strip, (Fig-
ure 3) are used for remote start/stop operation.Pump direction and speed are
not remotely controllable. In non-remote operation, these terminals are con-
nected together by a shorting bar. For remote control by switch closure, re-
move the shorting bar and connect the two terminals of an isolated remote
control switch or relay to terminals 3 and 4. A closure of the remote switch
contacts will turn the pump system on.Opening the contact will turn the pump
system off.
WARNING: Be sure the Pump Drive is turned off before proceeding.
Loose clothing could be caught in the drive.
Pump Heads Accepted: Only the MASTERFLEX®L/S®STANDARD, QUICK
LOAD and EASY-LOAD are acceptable for use with this pump drive.Only one
Pump Head at a time can be used with this drive unit.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

5
Figure 3. Pump Drive —Rear Panel
CAUTIONS: Use of Pump Heads other than those specified will result
in unsatisfactory performance, damage to the drive unit
and voiding of applicable warranties.
The drive system can only be used with one Pump Head
at a time. Use of this drive unit with multiple Pump Heads
will result in unsatisfactory performance, damage to the
drive unit and voiding of applicable warranties.
When mounting the Pump Head to the drive unit, the
mounting screws should only be tightened fingertight.
Excessive tightening of the mounting screws will result
in binding and unsatisfactory performance.
Tubing Accepted:The Pump Heads accepted for use with drive can be used
with MASTERFLEX precision tubing sizes L/S®13, L/S®14 and L/S®16 in all
formulations. For L/S®17 and L/S®25 size tubing, use silicone or C-FLEX®
formulations only.
Useonly MASTERFLEXprecision tubingwith MASTERFLEXpumps toensure
optimum performance. Use of other tubing may void applicable warranties.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

6
SETUP AND DRIVE OPERATION
1. Unpack the drive: save packaging material until proper product operation
has been verified.
2. Select and mount Pump Head and load tubing (see Pump Head manual).
3. For 77200-00 and 77200-10 plug in External Power supply and connect to
the back of the drive.(See Figure #3.)
4. For 77200-12 supply 11.0 to 15V DC to terminal strip positions 1 and 2.
(See Figure #3.)
5. The drive system can be set to operate in either a clockwise or a counter-
clockwise direction. The same control used to select direction also turns
power on or off.To operate in a clockwise direction place direction control
switch in the “up”position.The POWER indicator should light and the fluid
will flow from right to left.To operate in a counterclockwise direction, place
direction switch in the “down”position.The POWER indicator should light
and the fluid will flow from left to right.To turn pump off, place switch in the
“center”position.
6. The pump speed is controlled by the variable speed control. Turning the
control clockwise increases the speed. Tubing life is decreased with in-
creased operating speed. Speed can be controlled up to a 6:1 range.
MAINTENANCE
Cleaning: Keep the drive enclosure clean with mild detergents. Never im-
merse nor use excessive fluid.
Motor/ Brush Replacement: The motor used in this inexpensive drive is not
serviceable or repairable and has brushes which cannot be replaced. The
motor is rated for a continuous duty life of 3000 operating hours minimum.
Operation at other than continuous duty cycles will result in longer motor life.
If motor failure for whatever reason occurs, the motor must be replaced.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

7
SPECIFICATIONS
Output:
Operating Speed: 35 to 200 rpm
Number of Pump Heads: 1
Torque Load: 20 oz-in, maximum
Direction of Rotation: Clockwise and Counterclockwise
Input:
Operating Voltage/Frequency:
Model 77200-00 115V AC nominal 50/60 Hz
(90-130V AC) @ 120mA AC
Model 77200-10 230V AC nominal 50/60 Hz
(190-260V AC) @ 60mA AC
Model 77200-12 13.5V DC nominal
(11.0-15.0V DC) @ 2.4A DC
Installation Category:
Models 77200-00 and -10 Category II per IEC664 (Local Level
Appliances, Portable equipment, etc.)
Model 77200-12 Category I per IEC664 (Signal Level)
Remote Start/Stop: Contact closure connection at
terminal strips 3 and 4
Construction:
Dimensions (L ⫻W ⫻H): 5.750 in ⫻5.14 in ⫻4.14 in
(14.6 cm ⫻13.0 cm ⫻10.5 cm)
Weight: 1.88 pounds (0.85 kg)
Material: Painted Steel
Enclosure Rating: IP22 per IEC529
Environment:
Operating Temperature: 32°F to 104°F (0°to 40°C)
Storage Temperature: -49°F to 149°F (-45°C to 65°C)
Humidity (non-condensing): 10% to 90%
Altitude: 6600 Ft. (2000m)
Pollution Degree: Pollution Degree 2 per IEC664
(Indoor use —Lab, Office)
Compliance (For CE Mark): EN61326-1/A1: 1998
(EU EMC Directive)
115V AC Power Supply AC/DC
Converter is UL listed and CSA
approved. Regulatory agency
specifications not applicable to the
balance of the unit due to low voltage.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

8
WARRANTY
Use only MASTERFLEX precision tubing with MASTERFLEX pumps to
ensure optimum performance. Use of other tubing may void applicable
warranties.
The Manufacturer warrants this product to be free from significant deviations
from published specifications. If repair or adjustment is necessary within the
warranty period, the problem will be corrected at no charge, if it is not due to
misuse or abuse on your part, as determined by the Manufacturer. Repair
costs outside the warranty period, or those resulting from product misuse or
abuse, may be invoiced to you.
The warranty period for this product is noted on the Warranty Card.
PRODUCT RETURN
To limit charges and delays, contact the seller or Manufacturer for authoriza-
tion and shipping instructions before returning the product, either within or
outside of the warranty period.When returning the product, please state the
reason for the return. For your protection, pack the product carefully and in-
sureit against possibledamage or loss.Any damagesresultingfrom improper
packaging are your responsibility.
TECHNICAL ASSISTANCE
If you have any questions about the use of this product, contact the Manufac-
turer or authorized seller.
Printed in U.S.A.
03100
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

Artisan Technology Group is an independent supplier of quality pre-owned equipment
Gold-standard solutions
Extend the life of your critical industrial,
commercial, and military systems
with our
superior service and support.
We buy equipment
Planning to upgrade your current
equipment? Have surplus equipment taking
up shelf space? We'll give it a
new home.
Learn more!
Visit us at artisantg.com for more info
on price quotes, drivers, technical
specifications, manuals, and documentation.
Artisan Scientific Corporation dba Artisan Technology Group is not an affiliate, representative, or authorized distributor for any manufacturer listed herein.
We're here to make your life easier. How can we help you today?
[phone] [e-mail] Iartisantg.com