Colebrook Bosson Saunders FLO MODULAR User manual

www.colebrookbossonsaunders.com
FOLD FOLD FOLD
9KG/19.8LB
USING YOUR FLO ARM 10
Once it has been correctly set
up, your Flo arm permits you
to easily position your monitor
wherever you want it with
fingertip control
The monitor can easily be
swivelled from landscape
to portrait orientation
USEFUL TIP
Ensure you have allowed enough free cable for screen rotation
INSTALL SECOND FLO MODULAR
CLAMP BRACKET AND ARM
12
FLO MODULAR DUAL MOUNT ASSEMBLY
FLO MODULAR DUAL CLAMP
BRACKET ASSEMBLY
11
Fit clamp
bracket to
post
12A Install grub
screw
12B
Fit second
arm to clamp
bracket
12C
IMPORTANT
To complete installation of second monitor
repeat from step 5 overleaf
Ensure the washer is
orientated correctly
for required 90°
stop position
CODE MOUNT DESCRIPTION WITH 90⁰ STOP WITHOUT 90⁰ STOP
WORKSURFACE MOUNTS
UNI/LCLM38 Universal Desk Clamp Not recommended ✓Recommended
UNI/TAC/001 Universal Top Mount Clamp Not recommended ✓ Recommended
UNI/SMC/001 Universal Screen Mount Clamp Not recommended ✓ Recommended
UNI/CSG100/K Cast Grommet Mount Not recommended ✓ Recommended
UNI/HLC/001 Universal High Load Split Mount Clamp ✓ Recommended ✓ Recommended
UNI/HLC/002 Universal High Load Top Mount Clamp ✓ Recommended ✓ Recommended
WSH/100S12/K Through Desk Mount Not recommended ✓ Recommended
WSH/50S12/K Through Desk Mount Not recommended ✓ Recommended
SLATWALL / WALL MOUNTS
UNI/MSB/001 Multi Screen Slatwall Mount ✓ Recommended ✓ Recommended
UNI/MSB/002 Multi Screen Slatwall Mount ✓ Recommended ✓ Recommended
UNI/SWB/001 Universal Slatwall Mount Not recommended ✓ Recommended*
UNI/SWB/002 Universal Slatwall Mount Not recommended ✓ Recommended*
DESK FIXING COMPATIBILITY
*Note that the Flo modular will fit to this mount but the post-mount component
cannot clamp to it so arm articulation will be unpredictable.
Install spigot,
washer and bolt
No 90° stop
function
For 90° stop
function
Install plastic
bush
90°
Note that bracket is
inverted for 2nd arm
installation
FLO MODULAR INSTRUCTIONS
DYN/013/007
COMPONENT LIST
OTHER REQUIRED COMPONENTS
Wishbone post x 1
Desk fixing x 1
IMPORTANT
Dual install requires 2 x DYN-013-007
FLO MODULAR
Flo monitor arm x 1
Clamp bracket assembly x 1
Plastic bush x 1
VESA plate x 1
Optional security screw x 1
M4x10 Screws x 4
M4x12 Screws x 4
3mm Allen Key x 1
6mm Allen Key x 1
CLAMP BRACKET ASSEMBLY
Spigot x 1
90° stop Washer x 1
M16 Washer x 1
Bolt x 1
Lock washer x 1
Grub screw x 1
Colebrook Bosson Saunders hold a number of patents and other intellectual property rights covering our
products and processes. You can find patent information on our website at:
www.colebrookbossonsaunders.com/patents
PATENTS
As part of Colebrook Bosson Saunders ongoing product improvement programme, the design
of products may change without prior notice and details may vary from those illustrated.
DISCLAIMER
Please consider leaving these instructions with the
product if further installation may be required by others
DYN-013-007 -INST-D-JUL 2018
PRINT SIZE  A3 420MM X 297MM
FOLD
FOLD

ADJUST ARM TO SUIT
WEIGHT OF MONITOR
8
FOLD FOLD FOLD
Turn adjuster screw
until monitor ‘floats’
in all height positions
USEFUL TIP
Adjustment will be easier and more precise if
arm is positioned as shown below whilst adjusting
8A
The arm setting indicator
allows for quick installation
of multiple monitors
You can quickly ‘dial in’ to
the same setting, then if
necessary, fine tune the
adjustment to balance the
monitor
8B
Ca.
Ca.
-Lighter
monitors
Use 6mm
Allen Key
FIXING POST TO DESK OPTIONS 1
UNI/CSG100/K
UNI/CSG50/K
DESK CLAMP
A
THROUGH DESK
B
Cast Grommet
Back
of desk
CCAST GROMMET
Follow one
of the Desk and
Post fixing options
described below
UNI/50S12/K
UNI/100S12/K
ASSEMBLE POST MOUNT COMPONENTS 2
FIT MONITOR ARM
ONTO CLAMP BRACKET
4
MOUNT MONITOR TO ARM 6
Screws under-
inserted
IMPORTANT
It is the responsibility of the installer to ensure all mounting
screws are properly engaged with a minimum of 4 x 360˚ turns
into the display. Under or over insertion may cause damage to
the equipment or injury to personnel.
MAX
SCREEN WEIGHT
9KG/19.8LB
Use screws supplied
4 x
4 x
ATTACH MONITOR MOUNT
PLATE TO MONITOR
5
IMPORTANT
Raise arm to uppermost position before removing monitor
otherwise it may spring up when unloaded
Screws over-
inserted
TO REMOVE MONITOR 7
IMPORTANT
Ensure you leave enough
free cable to avoid
stretching or snagging
at all positions
INSTALL MONITOR CABLES INTO
CABLE MANAGEMENT FEATURES
9
Install plastic
bush
Ensure the washer is
orientated correctly
for required 90°
stop position
No 90° stop
function
For 90°
stop
function
IMPORTANT
Refer to individual
instructions
UNI/SMC UNI/LCLM38 UNI/TAC
UNI/HLC
IMPORTANT
Please see compatibility table overleaf
for guidance on recommended
desk fixings
Install optional security
screw if required
6B
6A
90°
90°
+ Heavier
monitors
Install
Grub screw
to secure
3B
Install Clamp
bracket to
Post
3A
See also step if 90⁰ stop needs
to be reconfigured or removed
2
ATTACH CLAMP BRACKET TO POST 3
Go straight to step See also step
before continuing to step
Ensure that stud is fully
screwed into post before
installing
30mm
Approx
SINGLE
CONFIGURATION
DUAL
CONFIGURATION
2
2
11
PRINT SIZE  A3 420MM X 297MM
FOLD
FOLD