Colormetrics P2000 User manual

Errors excepted; subject to change www.colormetrics.com.tw
P2000
User Manual
Version 1.2

2www.colormetrics.com.twColormetrics P2000

3
www.colormetrics.com.tw Colormetrics P2000
TABLE OF CONTENTS
COPYRIGHT 4
SAFETY INSTRUCTIONS 5
PACKING LIST 6
1-1. Standard Accessories 6
SYSTEM VIEW 7
2-1. Rear View with Optional LPT Port 7
2-2. Specification 8
2-3. Internal Layout 9
PIN DEFINITION 10
REAR I/O INTERFACE 12
SYSTEM ASSEMBLY & DISASSEMBLY 14
3-1. HDD 14
3-2. CF- Card 14
3-3. MSR 16
3-4. UPS Battery 17
3-5. cable cover 17
3-6. 8"/15" 2nd Display 18
3-7. Wi-Fi 21
3-8. 1D / 2D / iButton with RFID Module 23
DEVICE DRIVER INSTALLATION 24
4-1. Resistive Type Touch Panel 24
4-2. MagStripe Card Reader Configuration Utility 31
4-3. Fingerprint Reader 35
4-4. RFID 46
INTERNAL VFD (OPTIONAL) 56
5-1. VFD Specification 56
SETUP SOFTWARE GUIDE 57
BIOS/UTILITY SETUP 59
Advanced BIOS Features 61
Advanced Chipset Features 62
Integrated Peripherals 63
SuperIO Device (Press Enter) 63
Power Management Setup 64
LCD Surface Cleaning 66

4www.colormetrics.com.twColormetrics P2000
COPYRIGHT
Copyright 2010 Publishing. All Rights Reserved.
This manual, software and firmware described in it are copyrighted by their respective owners and
protected under the laws of the Universal Copyright Convention. You may not reproduce, transmit,
transcribe, store in a retrieval system, or translate into any language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, biological, molecular, manual, or otherwise, any part
of this publication without the express written permission of the publisher.
All products and trade names described within are mentioned for identification purpose only. No
affiliation with or endorsement of the manufacturer is made or implied. Product names and brands
appearing in this manual are registered trademarks of their respective companies.
The information published herein has been checked for accuracy as of publishing time. No representation
or warranties regarding the fitness of this document for any use are made or implied by the publisher. We
reserve the right to revise this document or make changes in the specifications of the product described
therein at any time without notice and without obligation to notify any person of such revision or change.

5
www.colormetrics.com.tw Colormetrics P2000
SAFETY INSTRUCTIONS
1. Read these instructions carefully. Keep these instructions for future reference.
2. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed
detergent for cleaning. Use moisture sheet or cloth for cleaning.
3. Please keep this equipment from humidity.
4. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
5. Make sure power cord such a way that people can not step on it. Do not place anything over the
power cord.
6. All cautions and warnings on the equipment should be noted.
7. If the equipment is not used for long time, disconnect the equipment from main to avoid being
damaged by transient over voltage.
8. Never pour any liquid into opening, this could cause fire or electrical shock.
9. If one of the following situations arises, get the equipment checked by a service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well or you can not get it work according to user manual.
e. The equipment has dropped and damaged.
10. Do not leave this equipment in an environment unconditioned, storage temperature below -20°C or
above 60°C, it may damage the equipment.
11. Unplug the power cord when doing any service or adding optional kits.
Lithium Battery Caution:
Danger of explosion can happen if the battery is incorrectly replaced, Replace only the original or equivalent
type recommended by the manufacture. Dispose used batteries according to the manufacture’s instructions.
Do not remove the cover, and ensure no user serviceable components are inside. Take the unit to the
service center for service and repair.

6www.colormetrics.com.twColormetrics P2000
PACKING LIST
1-1. Standard Accessories
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. Screw
f. Cable Cover

7
www.colormetrics.com.tw Colormetrics P2000
SYSTEM VIEW
2System View
2-1. Rear View with Optional LPT Port
2-1. Rear View Standard
7
Item
1. 19V DC Input
2. PS2(K/B)
3. RJ45(RS232 for VFD)
4. UPS Battery
5. COM2
6. COM3
7. VGA
8. USB 2.0/1.1 X4
9. RJ45(LAN)
10. RJ11
11. Line-Out
12. Mic
13. COM1
14. Parallel port(Option)
15. Power Button
16. HDD/CF CARD
17. MSR/smart card/IBUTTON/Fingerprint/RFID(Option)
18. VFD(Option)
*Please make sure 19V DC plug in the right
direction before plugging in DC jack.
2-1. Rear View Standard
2-1. Rear View with Optional LPT Port
2System View
2-1. Rear View with Optional LPT Port
2-1. Rear View Standard
7
Item
1. 19V DC Input
2. PS2(K/B)
3. RJ45(RS232 for VFD)
4. UPS Battery
5. COM2
6. COM3
7. VGA
8. USB 2.0/1.1 X4
9. RJ45(LAN)
10. RJ11
11. Line-Out
12. Mic
13. COM1
14. Parallel port(Option)
15. Power Button
16. HDD/CF CARD
17. MSR/smart card/IBUTTON/Fingerprint/RFID(Option)
18. VFD(Option)
*Please make sure 19V DC plug in the right
direction before plugging in DC jack.
2System View
2-1. Rear View with Optional LPT Port
2-1. Rear View Standard
7
Item
1. 19V DC Input
2. PS2(K/B)
3. RJ45(RS232 for VFD)
4. UPS Battery
5. COM2
6. COM3
7. VGA
8. USB 2.0/1.1 X4
9. RJ45(LAN)
10. RJ11
11. Line-Out
12. Mic
13. COM1
14. Parallel port(Option)
15. Power Button
16. HDD/CF CARD
17. MSR/smart card/IBUTTON/Fingerprint/RFID(Option)
18. VFD(Option)
*Please make sure 19V DC plug in the right
direction before plugging in DC jack.
Item
1. 19V DC Input
2. PS2(K/B)
3. RJ45(RS232 for VFD)
4. UPS Battery
5. COM2
6. COM3
7. VG A
8. USB 2.0/1.1 X4
9. RJ45(LAN)
10. RJ11
11. Line-Out
12. Mic
13. COM1
14. Parallel port(Option)
15. Power Button
16. HDD/CF CARD
17. MSR/smart card/IBUTTON/
Fingerprint/RFID(Option)
18. VFD(Option)
* Please make sure 19V DC plug in the right
direction before plugging in DC jack.

8www.colormetrics.com.twColormetrics P2000
2-2. Specification
Processor
Chipsets: North Bridge/South Bridge
Memory
Audio
Network
USB
Storage
BIOS
Power
Thermal Solution
Dimension
Operating Temperature
Storage Temperature
Storage Humidity
Display
LCD Panel Size
Resolution
Brightness
Touch Panel
Tilt Angle
Intel® Atom™ processor D525 (1M Cache, 1.80GHz)
ICH8-M
One SO-DIMM socket supports DDR3 800 up to 4GB
Line-out/Mic-in
RJ45 10/100/1000 Base-T
4*USB 2.0
CF card / 2.5” SATA HDD / SSD
Award PnP BIOS, 8Mb SPI ROM
DC 19V/4.74A 90W Adaptor
Fan-less
368 (W) x 264.2 (H) x 285 (D) mm
0°C ~ 35°C
-20°C ~ 60°C
20% ~ 80%, non-condensing
15-inch TFT Active Matrix Display
1024*768 Pixels
250 cd/m2
5-wire Resistive Type / Projected Capacitive Type
30°~90°

9
www.colormetrics.com.tw Colormetrics P2000
2-3. Internal Layout

10 www.colormetrics.com.twColormetrics P2000
PIN DEFINITION
1. Parallel J7
2. Jumper for CF CARD Selection
3. Lin-out J3
Pin NO. Pin Name Description
1 STB# Printer Strobe
2 PD0 Parallel Port DATA0
3 PD1 Parallel Port DATA1
4 PD2 Parallel Port DATA2
5 PD3 Parallel Port DATA3
6 PD4 Parallel Port DATA4
7 PD5 Parallel Port DATA5
8 PD6 Parallel Port DATA6
9 PD7 Parallel Port DATA7
10 ACK# Printer Acknowledge
11 BUSY Printer Busy
12 PE Printer Paper End
13 SLCT Printer Select
14 AFD# Printer Auto Line Feed
15 ERR# Printer Error
16 INIT# Printer Initialize
17 SLIN# Printer Select Input
18 GND Ground
19 GND Ground
20 GND Ground
Pin NO. Pin Name Description
1 5V +5V
2 CF POWER CF POWER
3 3.3V +3.3V
Pin NO. Pin Name Description
1 GND Ground
2 GND Ground
3 Line OUT R Line out
4 Line OUT L Line out
5 Detect Delect
4. VFD Connector CN9
Pin NO. Pin Name Description
1 5V +5V
2 NDSR DSR
3 GND Ground
4 NRTS DTR
5 NRTS RTS
6 NCTS CTS
7 NTXD TXD
8 NRXD RXD
9 GND Ground
10 12C +12V

11
www.colormetrics.com.tw Colormetrics P2000
5. Mic
6. Speaker SP1
7. LVDS CN 2
Pin NO. Pin Name Description
1 GND Ground
2 GND Ground
3 Mic R Mic
4 Mic L Mic
5 Detect Detect
Pin NO. Pin Name Description
1 VCC +5V
2- DATA D-
3+ DATA D+
4 GND Ground
5 GND Ground
Pin NO. Pin Name Description
1 LCDVCC +3.3v
2 LCDVCC +3.3v
3 GND Ground
4 NC NC
5 DATA 0- LVDS Output DATA0-
6 DATA 0+ LVDS Output DATA0+
7 GND Ground
8 DATA 1- LVDS Output DATA1-
9 DATA 1+ LVDS Output DATA1+
10 GND Ground
11 DATA 2- LVDS Output DATA2-
12 DATA 2+ LVDS Output DATA2+
13 GND Ground
14 CLK- LVDS CLK-
15 CLK+ LVDS CLK+
16 GND Ground
17 NC NC
18 NC NC
19 GND Ground
20 NC NC
Pin NO. Pin Name Description
1 + Speaker +
2 - Speaker -
8. Inverter CN14
9. Extra USB CN13
Pin NO. Pin Name Description
1 VCC +12V
2 GND Ground
3 NC NC
4 BKL_CTL Back Light Brightness
5 BKL_EN Back Light Enable

12 www.colormetrics.com.twColormetrics P2000
REAR I/O INTERFACE
1. COM1’ COM2’ COM3 port
2. VGA port
Pin Signal
Name
Wire Colour Comment
1 Vcc Red Cable Power
2 - Data White Data Transfer
3 + Data Green Data Transfer
4 Ground Black Cable Ground
Shell Shield - Drain Wire
Pin Signal Name
1 Data from Device
2 Not Connected
3 Ground
4 +5V DC
5 Clock
6 Not Connected
Pin Signal Function
1 CD Carrier Detect (IN)
2 RD Receive Data (IN)
3 TD Transmit Data(OUT)
4 DTR Data Terminal Ready(OUT)
5 GND Ground
6 DSR Data Set Ready (In)
7 RTS Request To Send (OUT)
8 CTS Clear To Send (IN)
9 Ring/5V/12V Setting by BIOS
Pin I / O Function
1 Out Red Video
2 Out Green Video
3 Out Blue Video
4 In Monitor ID 2
5 - TTL Ground
(Monitor Self Test)
6 - Red Analogue Ground
7 - Green Analogue Ground
8 - Blue Analogue Ground
9 - Key (Plugged Hole)
10 - Sync Ground
11 In Monitor ID 0
12 In Monitor ID 1
13 Out Horizonal Sync
14 Out Vertical Sync
15 In Monitor ID 3
3. USB port
4. PS/2 K/B port
COM4 port. Warning!! COM4 (RJ45 Connector ) for
external VFD use only. Never use on network device.
If you are using on the network device will cause the
device damaged.
Pin 1: +5V / +12V
Pin 2: DSR#
Pin 3: GND
Pin 4: DTR#
Pin 5: RTS#
Pin 6: CTS#
Pin 7: TxD
Pin 8: RxD
4
Rear I/O Interface
1. COM1’ COM2’ COM3 port
2.
VGA port
3. USB port
4. PS/2 K/B port
12
Pi
n
Signal Function Pin Signal Function
1CD Carrier Detect (IN) 6DSR Data Set Ready (In)
2RD Receive Data (IN) 7RTS Request To Send (OUT)
3TD Transmit Data(OUT) 8CTS Clear To Send (IN)
4DTR Data Terminal Ready(OUT) 9 Ring/5V/12V Setting by BIOS
5GND Ground
COM4 port . Warning!! COM4 (RJ45 Connector ) for external VFD use only. Never use on
network device. If you are using on the network device will cause the device damaged.
1 2 3 4 5 6 78 Enlarge JUMP

13
www.colormetrics.com.tw Colormetrics P2000
5. LAN port 7. DC Jack
6. RJ11 port (for Cash drawer)
Pin Wire Colour Description
1 White/Orange Transmit
2 Orange Transmit
3 White/Green Receive
4 Blue Not Used
5 White/Blue Not Used
6 Green Receive
7 White/Brown Not Used
8 Brown Not Used
Pin Signal Name
1 DC IN 19V
2 Ground
Pin Signal Name Direction
1 Frame GND -
2 Drawer Kick-out
drive signal 1
Output
3 N/C -
4 +12V -
5 N/C -
6 Signal GND -
Example DOS COMMAND for Cash Drawer:
1. Create the file: TEST.T X T
2. Input below contents in TEST.T X T
CONTEXT-"000.0”
MODE COM6:300
3. Run COMMAND under DOS mode
COPY TEST.TXT COM6

14 www.colormetrics.com.twColormetrics P2000
SYSTEM ASSEMBLY & DISASSEMBLY
3-1. HDD
3-2. CF-Card
1. Unfasten the HDD cover screw*2
2. Pull out the HDD bracket
3. Fasten the screw*4
4. Place the HDD bracket back to the module
1. Please notice the notched CF Card. This side up.
5 System Assembly & Disassembly
5-1. HDD
1. Unfasten the HDD cover screw*2
2. Pull out the HDD bracket
3. Fasten the screw*4
4. Place the HDD bracket back to the module
5-2. MSR
1. Open the MSR cover
2. Single MSR or 4in1MSR
3. Screw*2 M3x10L
4. Fasten the screw
5-3. UPS Battery
14
UP

15
www.colormetrics.com.tw Colormetrics P2000
2. Before Installing CF Card.
3. After Installing CF Card.

16 www.colormetrics.com.twColormetrics P2000
3-3. MSR
1. Open the MSR cover
2. Single MSR or 4in1MSR
3. Screw*2 M3x10L
4. Fasten the screw
5 System Assembly & Disassembly
5-1. HDD
1. Unfasten the HDD cover screw*2
2. Pull out the HDD bracket
3. Fasten the screw*4
4. Place the HDD bracket back to the module
5-2. MSR
1. Open the MSR cover
2. Single MSR or 4in1MSR
3. Screw*2 M3x10L
4. Fasten the screw
5-3. UPS Battery
14
UP
(1) Paste two rubbers on the located position of the Stand Bracket.
(2) Reeve two cable ties through the stand bracket. Place the battery pack in
position and bind the cable ties tightly. Then cut the extra tail from cable ties.
(3) Reeve the cable from the battery pack through the stand bracket and click the
cable lock.
5-4. cable cover
Assemble the cable cover from bottom and make sure the two latches are on the
right position. Then fasten 2 screws (M3*5L).
5-5. 15” 2nd Display
15
Positioning hole
Positioning
hole
(1) Paste two rubbers on the located position
of the Stand Bracket.
(2) Reeve two cable ties through the stand
bracket. Place the battery pack in position
and bind the cable ties tightly. Then cut the
extra tail from cable ties.
3-4. UPS Battery

17
www.colormetrics.com.tw Colormetrics P2000
(1) Paste two rubbers on the located position of the Stand Bracket.
(2) Reeve two cable ties through the stand bracket. Place the battery pack in
position and bind the cable ties tightly. Then cut the extra tail from cable ties.
(3) Reeve the cable from the battery pack through the stand bracket and click the
cable lock.
5-4. cable cover
Assemble the cable cover from bottom and make sure the two latches are on the
right position. Then fasten 2 screws (M3*5L).
5-5. 15” 2nd Display
15
Positioning hole
(1) Paste two rubbers on the located position of the Stand Bracket.
(2) Reeve two cable ties through the stand bracket. Place the battery pack in
position and bind the cable ties tightly. Then cut the extra tail from cable ties.
(3) Reeve the cable from the battery pack through the stand bracket and click the
cable lock.
5-4. cable cover
Assemble the cable cover from bottom and make sure the two latches are on the
right position. Then fasten 2 screws (M3*5L).
5-5. 15” 2nd Display
15
Positioning hole
(1) Paste two rubbers on the located position of the Stand Bracket.
(2) Reeve two cable ties through the stand bracket. Place the battery pack in
position and bind the cable ties tightly. Then cut the extra tail from cable ties.
(3) Reeve the cable from the battery pack through the stand bracket and click the
cable lock.
5-4. cable cover
Assemble the cable cover from bottom and make sure the two latches are on the
right position. Then fasten 2 screws (M3*5L).
5-5. 15” 2nd Display
15
Positioning hole
(3) Reeve the cable from the battery pack
through the stand bracket and click the
cable lock.
Assemble the cable cover from bottom and make sure the two latches are on the right position.
Then fasten 2 screws (M3*5L).
3-5. cable cover

18 www.colormetrics.com.twColormetrics P2000
* Power supply must be replaced to 120W above power adapter.
(1) Remove the plastic pole cover from
the stand.
(3) Fasten the four screws (M4*8L) to joint the
VESA bracket and the rear cover.
(2) Install the pole into the socket in clockwise
direction.
3-6. 8"/15" 2nd Display
* Power supply must be replaced to 120W above power adapter.
(1) Remove the plastic pole cover from the stand.
(2) Install the pole into the socket in clockwise direction.
(3) Fasten the four screws (M4*8L) to joint the VESA bracket and the rear cover.
(4) Connect the COM port, DC cable as shown in figure . (Please refer to page
60 to set the COM port pin9 with 12V DC output.)
(5) Connect the VGA cable as shown in figure .
16
* Power supply must be replaced to 120W above power adapter.
(1) Remove the plastic pole cover from the stand.
(2) Install the pole into the socket in clockwise direction.
(3) Fasten the four screws (M4*8L) to joint the VESA bracket and the rear cover.
(4) Connect the COM port, DC cable as shown in figure . (Please refer to page
60 to set the COM port pin9 with 12V DC output.)
(5) Connect the VGA cable as shown in figure .
16
* Power supply must be replaced to 120W above power adapter.
(1) Remove the plastic pole cover from the stand.
(2) Install the pole into the socket in clockwise direction.
(3) Fasten the four screws (M4*8L) to joint the VESA bracket and the rear cover.
(4) Connect the COM port, DC cable as shown in figure . (Please refer to page
60 to set the COM port pin9 with 12V DC output.)
(5) Connect the VGA cable as shown in figure .
16

19
www.colormetrics.com.tw Colormetrics P2000
(6) Connect the audio cable as shown in figure.
(7) Assemble the cable cover from bottom and make sure the two latches are on
the right position, and fasten the two screws (M3*5L).
(8) Route the cables through the opening of stand front cover and cable clip at the
bottom and route the cables into the tube of pole.
(9) Reeve the cables out of the tube.
17
(9) Reeve the cables out of the tube.
(10) Mount the VESA bracket on the pole and route cables out of the tube of VESA bracket. Fasten the
thumb screw to fix the VESA bracket.
(10) Mount the VESA bracket on the pole and route cables out of the tube of VESA
bracket. Fasten the thumb screw to fix the VESA bracket.
(11) Connect the DC power cable as shown in figure.
(12) Connect the VGA cable as shown in figure.
(13) Connect the Audio cable as shown in figure.
(14) Put the cable cover on the hinge of VESA bracket.
18
(10) Mount the VESA bracket on the pole and route cables out of the tube of VESA
bracket. Fasten the thumb screw to fix the VESA bracket.
(11) Connect the DC power cable as shown in figure.
(12) Connect the VGA cable as shown in figure.
(13) Connect the Audio cable as shown in figure.
(14) Put the cable cover on the hinge of VESA bracket.
18
(4) Connect the COM port, DC cable as shown
in figure (1). (Please refer to page 61 to set
the COM port pin9 with 12V DC output.)
(5) Connect the VGA cable as shown in figure (2).
(6) Connect the audio cable as shown in figure(3).
(7) Assemble the cable cover from bottom and
make sure the two latches are on the right
position, and fasten the two screws (M3*5L).
(8) Route the cables through the opening of
stand front cover and cable clip at the bottom
and route the cables into the tube of pole.
(6) Connect the audio cable as shown in figure.
(7) Assemble the cable cover from bottom and make sure the two latches are on
the right position, and fasten the two screws (M3*5L).
(8) Route the cables through the opening of stand front cover and cable clip at the
bottom and route the cables into the tube of pole.
(9) Reeve the cables out of the tube.
17

20 www.colormetrics.com.twColormetrics P2000
(11) Connect the DC power cable as shown in
figure (1).
(12)
Connect the VGA cable as shown in figure (2).
(13) Connect the Audio cable as shown in
figure (3).
(14) Put the cable cover on the hinge of VESA
bracket.
(10) Mount the VESA bracket on the pole and route cables out of the tube of VESA
bracket. Fasten the thumb screw to fix the VESA bracket.
(11) Connect the DC power cable as shown in figure
.
(12) Connect the VGA cable as shown in figure
.
(13) Connect the Audio cable as shown in figure
.
(14) Put the cable cover on the hinge of VESA bracket.
18
19