Colormetrics P3300 User manual

Errors excepted; subject to change www.colormetric.net
P3300
User Manual
Version 1.0

2
www.colormetric.netColormetrics P3300
COPYRIGHT
Copyright 2014 Publishing. All Rights Reserved.
This manual, software and firmware described in it are copyrighted by their respective owners and
protected under the laws of the Universal Copyright Convention. You may not reproduce, transmit,
transcribe, store in a retrieval system, or translate into any language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, biological, molecular, manual, or otherwise, any part
of this publication without the express written permission of the publisher.
All products and trade names described within are mentioned for identification purpose only. No
affiliation with or endorsement of the manufacturer is made or implied. Product names and brands
appearing in this manual are registered trademarks of their respective companies.
The information published herein has been checked for accuracy as of publishing time. No representation
or warranties regarding the fitness of this document for any use are made or implied by the publisher. We
reserve the right to revise this document or make changes in the specifications of the product described
therein at any time without notice and without obligation to notify any person of such revision or change.

3
www.colormetric.net Colormetrics P3300
SAFETY INSTRUCTIONS
1. Read these instructions carefully. Keep these instructions for future reference.
2. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed
detergent for cleaning. Use moisture sheet or cloth for cleaning.
3. Please keep this equipment from humidity.
4. Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
5. Make sure power cord such a way that people can not step on it. Do not place anything over the
power cord.
6. All cautions and warnings on the equipment should be noted.
7. If the equipment is not used for long time, disconnect the equipment from main to avoid being
damaged by transient over voltage.
8. Never pour any liquid into opening, this could cause fire or electrical shock.
9. If one of the following situations arises, get the equipment checked by a service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well or you can not get it work according to user manual.
e. The equipment has dropped and damaged.
10. Do not leave this equipment in an environment unconditioned, storage temperature below -20°C or
above 60°C, it may damage the equipment.
11. Unplug the power cord when doing any service or adding optional kits.
Lithium Battery Caution:
Danger of explosion can happen if the battery is incorrectly replaced, Replace only the original or equivalent
type recommended by the manufacture. Dispose used batteries according to the manufacture’s instructions.
Do not remove the cover, and ensure no user serviceable components are inside. Take the unit to the
service center for service and repair.

4
www.colormetric.netColormetrics P3300
TABLE OF CONTENTS
COPYRIGHT 2
SAFETY INSTRUCTIONS 3
1 PACKING LIST 5
1-1. Standard Accessories 5
1-2. Optional Accessories 5
2 SYSTEM VIEW 6
2-1. Front/Rear View 6
2-2. Specification 7
3 PIN DEFINITION 8
4 REAR I/O INTERFACE 11
5 SYSTEM ASSEMBLY & DISASSEMBLY 14
5-1. HDD 14
5-2. Memory 14
5-3. MSR 14
5-4. VFD 15
5-5. 2nd HDD Kit 15
5-6. 8” 2nd Monitor 16
5-7. Adapter 17
5-8. 1D / 2D / i-Button with RFID module 18
6 DEVICE DRIVER INSTALLATION 19
6-1. Resistive Type Touch Panel & P-Cup 19
6-2. MagStripe Card Reader Configuration Utility 25
6-3. Fingerprint Reader 42
6-4. RFID 52
6-5. Configuration Utility of I-Button Reader 58
6-6. Installation and Testing of Smart Card Reader 66
7 BIOS/UTILITY SETUP 71
7-1. Advanced 72
7-2. Chipset 83
7-3. Boot 87
7-4.Security 88
7-5.Save & Exit 89
8 LCD SURFACE CLEANING 90

5
www.colormetric.net Colormetrics P3300
PACKING LIST
1-1. Standard Accessories
a. System (with stand)
b. Power Adapter
c. Power Cord
d. Driver Bank
e. Cable Cover
1-2. Optional Accessories
Modules*:
MSR
1D/2D barcode scanner
RFID (13,56 MHz)
iButton
Smart card reader
Fingerprint reader
MODULES*:
MSR
1D/ 2D BARCODE SCAN-
NER
RFID (13,56MHZ)
IBUTTON
SMARTCARD READER
FINGERPRINT READER
Accessories:
Build-in VFD
Pole VFD
8” pole customer display
15” pole customer display
UPS battery
*Note: Nearly all modules are also available as 2-in-1 or 3-in-1 solution.

6
www.colormetric.netColormetrics P3300
2 SYSTEM VIEW
2-1. Front/Rear View
Item
1. 19V DC Input
2. COM2
3. COM1
4. E-SATA&USB
5. USB 2.0 X2
6. VGA
7. LAN port
8. Line-out
9.Mic-in
10. PS2(K/B)
11. USB 2.0 X 2
12.RJ45(COM3)
13. RJ11(Cash Drawer)
14. Parallel port (Option)
15.Power Button
16. MSR/Smart Card/i-Button
/Fingerprint /RFID (Option)
17. HDD Cover
18. Antenna Cover
19. 8” 2nd Display/VFD Cover
20. Memory Cover
21.Power LED
22. Cover for Internal access of 2nd
HDD/Adapter
* Please make sure 19V DC plug in the right
direction before plugging in DC jack.

7
www.colormetric.net Colormetrics P3300
2-2. Specification
Processor
Chipsets: North Bridge/South Bridge
Memory
Audio
Network
USB
Storage
BIOS
Power
Thermal Solution
Dimension
Operating Temperature
Storage Temperature
Storage Humidity
Display
LCD Panel Size
Resolution
Brightness
Touch Panel
Tilt Angle
Intel® Celeron® G540 processor (2M Cache, 2.50GHz)
H61
One SO-DIMM socket supports DDR3 1066/1333MHZ up to 8GB
Line-out/Mic-in
RJ45 10/100/1000 Base-T
5*USB 2.0
2.5” SATA HDD / SSD
AMI BIOS
DC 19V 150W Adaptor
Heat sink + Fan X1
410 (W) x 385.2 (H) x 296.4 (D) mm
0°C ~ 35°C
-20°C ~ 60°C
20% ~ 80%, non-condensing
17-inch TFT Active Matrix Display
1028*1024 Pixels
250 cd/m2 /350cd/m2 (Optional)
5-wire Resistive Type / Projected Capacitive Type optional
30°~90°

8
www.colormetric.netColormetrics P3300
3 PIN DEFINITION
2. Parallel J1
Pin NO. Pin Name Description
1 STB# Printer Strobe
2 PD0 Parallel Port DATA0
3 PD1 Parallel Port DATA1
4 PD2 Parallel Port DATA2
5 PD3 Parallel Port DATA3
6 PD4 Parallel Port DATA4
7 PD5 Parallel Port DATA5
8 PD6 Parallel Port DATA6
9 PD7 Parallel Port DATA7
10 ACK# Printer Acknowledge
11 BUSY Printer Busy
12 PE Printer Paper End
13 SLCT Printer Select
Pin NO. Pin Name Description
14 AFD# Printer Auto Line Feed
15 ERR# Printer Error
16 INIT# Printer Initialize
17 SLIN# Printer Select Input
18 GND Ground
19 GND Ground
20 GND Ground
1. COM 5 for Touch Panel (CN 7)
Pin Function Pin Func-
tion
Pin Function
1 T_UR 3 T_SG 5 T_LR
2 T_UL 4 T_LL

9
www.colormetric.net Colormetrics P3300
4. VFD Connector CN9
Pin NO. Description
1 RTS#
2 GND
3 TxD
4 RxD
5 CTS#
6 +5V
7 +5V
8 USB D-
9 USB D+
10 GND
Pin NO. Pin Name Description
1 GND Ground
2 GND Ground
3 Line OUT R Line out
4 Line OUT L Line out
5 Detect Detect
3. Lin-out J3
5. Mic
6. Speaker SPK1, SPK2
Pin NO. Pin Name Description
1 GND Ground
2 GND Ground
3 Mic R Mic
4 Mic L Mic
5 Detect Detect
Pin NO. Pin Name Description
1 + Speaker +
2 - Speaker -

10
www.colormetric.netColormetrics P3300
7. LVDS CN 2
Pin NO. Description
1 RxECLK+
2 RxECLK-
3 RxE3+
4 RxE3-
5 RxE2+
6 RxE2-
7 GND
8 RxE1+
9 RxE1-
10 RxE0+
11 RxE0-
12 RxO3+
13 RxO3-
14 GND
15 RxOCLK+
16 RxOCLK+
17 GND
18 RxO2+
19 RxO2-
20 RxO1+
21 RxO1-
22 RxO0+
23 RxO0-
24 GND
25 NC, GND for G-type
26 NC
27 NC, GND for G-type
28 +5V
29 +5V
30 +5V
8. Inverter C14
Pin NO. Pin Name Description
1 VCC +12V
2 GND Ground
3 NC NC
4 BKL_CTL Back Light Brightness
5 BKL_EN Back Light Enable

11
www.colormetric.net Colormetrics P3300
4 REAR I/O INTERFACE
Rear I/O Drawing
Pin Signal Function
1 CD Carrier Detect (IN)
2 RD Receive Data (IN)
3 TD Transmit Data(OUT)
4 DTR Data Terminal
Ready(OUT)
5 GND Ground
6 DSR Data Set Ready (In)
7 RTS Request To Send (OUT)
8 CTS Clear To Send (IN)
9 Ring/5V/12V Setting by BIOS
Pin 1: +5V / +12V
Pin 2: DSR#
Pin 3: GND
Pin 4: DTR#
Pin 5: RTS#
Pin 6: CTS#
Pin 7: TxD
Pin 8: RxD
4
Rear I/O Interface
1. COM1’ COM2’ COM3 port
2.
VGA port
3. USB port
4. PS/2 K/B port
12
Pi
n
Signal Function Pin Signal Function
1CD Carrier Detect (IN) 6DSR Data Set Ready (In)
2RD Receive Data (IN) 7RTS Request To Send (OUT)
3TD Transmit Data(OUT) 8CTS Clear To Send (IN)
4DTR Data Terminal Ready(OUT) 9 Ring/5V/12V Setting by BIOS
5GND Ground
COM4 port . Warning!! COM4 (RJ45 Connector ) for external VFD use only. Never use on
network device. If you are using on the network device will cause the device damaged.
1 2 3 4 56 78
Jumper for COM4
Voltage Setting
Item
1. 19V DC Input
2. COM2
3. COM1
4. E-SATA&USB
5. USB 2.0 X2
6. VGA
7. LAN port
8. Line-out
9.Mic-in
10. PS2(K/B)
11. USB 2.0 X 2
12.RJ45(COM3)
13. RJ11(Cash Drawer)
14. Parallel port (Option)
15.Power Button
16. MSR/Smart Card/i-Button
/Fingerprint /RFID (Option)
17. HDD Cover
18. Antenna Cover
19. 8” 2nd Display VFD Cover
20. Memory Cover
1. COM1’ COM2’ port
2. RJ45 VFD

12
www.colormetric.netColormetrics P3300
Pin I/O Function
1 OUT Red Video
2 OUT Green Video
3 OUT Blue Video
4 IN Monitor ID 2
5 - TTL Ground (Monitor Self Test)
6 - Red Analogue Ground
7 - Green Analogue Ground
8 - Blue Analogue Ground
Pin Signal Name
1 Data from Device
2 Not Connected
3 Ground
4 +5V DC
5 Clock
6 Not Connected
3. VGA port
5. PS/2 K/B port
4. USB port
7. RJ11 port (for Cash Drawer)
Pin Signal Name Wire Colour Comment
1 VCC Red Cable Power
2 - Data White Data Transfer
3 + Data Green Data Transfer
4 Ground Black Cable Ground
Shell Shield - Drain Wire
Pin Signal Name Direction
1 Frame GND -
2 Drawer Kick-out drive signal 1 Output
3 Cash Drawer Status Input
4 +12V -
5 N/C -
6 Signal GND -
Pin I/O Function
9 - Key (Plugged Hole)
10 - Sync Ground
11 In Monitor ID 0
12 In Monitor ID 1
13 Out Horizontal Sync
14 Out Vertical Sync
15 In Monitor ID 3
Pin Wire Colour Description
1 White / Orange D0+
2 Orange D0-
3 White / Green D1+
4 Blue D1-
5 White / Blue D2+
6 Green D2-
7 White / Brown D3+
8 Brown D3-
6. LAN port
Example DOS COMMAND
for Cash Drawer:
1. Create the file: TEST.TXT
2. Input below contents in TEST.
TXT CONTEXT-“000.0”
MODE COM5:300
3. Run COMMAND under DOS
mode COPY TEST.TXT COM 5

13
www.colormetric.net Colormetrics P3300
Pin Signal Name
1 DC IN 19V
2 Ground
3 N/C
8. DC Jack
Pin Description Pin Description
1 GND U1 +5V
2 TX + U2 D-
3 TX - U3 D+
4 GND U4 GND
5 RX-
6 RX+
7 GND
9. eSATA&USB connector

14
www.colormetric.netColormetrics P3300
5 SYSTEM ASSEMBLY & DISASSEMBLY
5-1. HDD
5-2. Memory
1. Unscrew 2 screws and remove the HDD cover
2. Install HDD with 4 screws
1 2
1 2
1. Unscrew 1 screw and remove the memory cover
2. Install HDD with 4 screws
5-3 MSR
12
1. Remove MSR cover
2. Install MSR with two screws

15
www.colormetric.net Colormetrics P3300
1. Remove the cover
2. Plug VFD cable into the 1*6 pin connector
3. Install VFD with two screws
5-5 2nd HDD Kit
5-4 VFD
3
1
2
1 2

16
www.colormetric.netColormetrics P3300
1. Fix the e-SATA cable as the position shown in the picture 1
2. Install HDD kit with two screws
3. Plug e-SATA cable into the position shown in the picture 3
5-6 8” 2nd Monitor
1
32
3
1.Remove the cover
2. Plug cable into the 1*4 pin connector
3.Install 8” 2nd Monitor with two screws

17
www.colormetric.net Colormetrics P3300
5-7 Adapter
1. Unlock two screws and then remove the cover
2. Assemble the adapter bracket with two screws
3. Assemble the back cover the stand with two screws
The adapter bracket of P3300 is only for P3300 standard adapter
(Model name: FSP150, 150W). Please don’t assemble other type adapter into the stand.
Note:

18
www.colormetric.netColormetrics P3300
1. Cable installation.
For I-Button / RFID /1D/2D barcode scanner, please connect the cable as shown in figure
5-8 1D / 2D / i-Button with RFID module
2. Fix the screws as shown in below figure.

19
www.colormetric.net Colormetrics P3300
6. DEVICE DRIVER INSTALLATION
6-1. Resistive Type Touch Panel and P-CAP
1. Click “Next”
2. Click “Next”
2. Click “Next”

20 www.colormetric.netColormetrics P3300
3. Click “Next”
4. Select “None”, Click “Next”.
5. Click “OK”