Protech Systems SP-7256 User manual

Ver. Q3
All Rights Reserved. Copyright 2017
Packing Checklist
SP-7256
SP-7256 SP-7256
Specifications System View
FRONT VIEW SIDE VIEW Unit: mm
48
Button
SIDE I/O
Power USB 2.0
If you discover any item below is damaged or lost,
please contact your vendor immediately.
SP-7256 x1
This Quick Reference Guide x1
SP-7256
Quick
Reference
Guide
System
CPU Support Intel®Celeron N3350 processor on board
Memory Support 1 x SO-DIMM socket supporting 1600/1867MHz DDR3L
memory up to 8G (non-ECC)
OS Support Windows 10 64-bit, Ubuntu 16.04
Drive Bay 1 x 2.5” SATA HDD drive bay
Power Supply DC-in 9V~36V
Power Adapter 24V, 60W
System Weight 3.2 kg
Dimension (WxHxD) 391mm x 250mm x 48mm
Certificate FCC/CE/CB/UL
I/O Ports
Serial Port 1 port support (COM1 for RS232)
USB 4 x USB 3.0
1 x USB 2.0 on side bezel
Display Port 1 x DP
LAN 2 x LAN
(Controller: 2 x Intel I210-IT (MAC+PHY, PCIe interface))
Supports Wake-On-LAN
Audio 1 x Line-out, 1 x MIC-in
Digital I/O 4 in / 4 out
DC-IN 1 x 4-pin DC power jack
Power On/Off 1 x Power On/Off button on side bezel, 1 x Remote Switch
Display
LCD Panel Size 15.6” WXGA (resolution: 1366 x 768)
Touchscreen Projected capacitive touch screen
Environment
Operating Temp. 0°C ~ 40°C (32°F ~ 104°F)
Storage Temp. -20°C ~ 80°C (-4°F ~ 176°F)
Humidity 20% ~ 90%
Driver DVD x1
REAR I/O
COM
DC-IN HDD COM1
DP
DIO
LAN1
LAN2
USB 3.0
MIC-in
Line-out
HDD USB USB DP LAN1 LAN2 DIO Remote SW
DC-IN Remote
Switch
391
250
7.8

Jumper Setting
SP-7256
15.6” Fanless Panel PC
All Rights Reserved. Copyright 2017
Safety Precaution
Following messages are safety reminders on how to protect your system
from damages, and thus help you lengthen the life cycle of the system.
1. Check the Line Voltage
The operating voltage for the power supply should cover the range of
9V~36V DC; otherwise, the system may be damaged.
2. Environmental Conditions
Do not lay your SP-7256 flat on the table when it is in operation. Be
sure to allow enough room on each side to have easy access.
Avoid moving the system rapidly from a hot place to a cold place or
vice versa because condensation may come from inside of the system.
Place SP-7256 against strong vibrations, which may cause hard disk
failure.
3. Handling
Do not turn the system upside down. This may cause the hard drive
to malfunction.
Do not allow foreign objects to fall into this product.
If water or other liquid spills into this product, unplug the power cord
immediately.
4. Good Care
When the outside of the case is stained, remove the stain with neutral
washing agent with a dry cloth.
If dust has been accumulated on the outside, remove it by using a
special made vacuum cleaner for computer.
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
accordingto the manufacturer’s instructions.
WARNING!
Some internal parts of the system may have high electrical voltage. Therefore we
strongly recommend qualified engineers open and disassemble the system.
3.3V
LVDS Backlight Control
(default)
1
1
LVDS VCC Voltage
5V
3.3V
(default)
1
1
1
(default)
Normal
Clear CMOS Data
Clear
CMOS
1
CAUTION!
Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with the same or equivalent type recommended by the
manufacturer. Dispose the used batteries according to the manufacturer’s instructions.
Front Panel Setting
HDD LED
Power Button
3
1
2
1
2
1
2
1
2
9
10
9
10
9
10
9
10
5
7
8
Power LED
Reset Button
6
(1-3)
(2-6)
(5-7)
(8-10)
JP9
USB3 SATA1 JP_VDD1
LDVS1
JINV1
JP1
JBAT1JP7
JP4
SW1
JP3
SO-DIMM1
AUDIO1
M_PCIE1
PWR2
JDIO1
JFP1
COM1
COM2
JLPC1
LAN1 LAN2
DP1
USB2USB1
SATA_PWR1
JI2C1
5V