Advantech TPC-60S User manual

TPC-60S
ARM9 Touch Panel Computer
with 5.7” QVGA STN LCD Dis-
play
User Manual

TPC-60S User Manual ii
Copyright
The documentation and the software included with this product are copy-
righted 2004 by Advantech Co., Ltd. All rights are reserved. Advantech
Co., Ltd. reserves the right to make improvements in the products
described in this manual at any time without notice. No part of this man-
ual may be reproduced, copied, translated or transmitted in any form or
by any means without the prior written permission of Advantech Co., Ltd.
Information provided in this manual is intended to be accurate and reli-
able. However, Advantech Co., Ltd. assumes no responsibility for its use,
nor for any infringements of the rights of third parties, which may result
from its use.
Acknowledgements
IBM, PC/AT, PS/2 and VGA are trademarks of International Business
Machines Corporation.
Microsoft Windows and MS-DOS are registered trademarks of
Microsoft Corp.
All other product names or trademarks are properties of their respective
owners.
Part No. 2003006001 2nd Edition
Printed in Taiwan February 2004

iii
Product Warranty (1 year)
Advantech warrants to you, the original purchaser, that each of its prod-
ucts will be free from defects in materials and workmanship for one year
from the date of purchase.
This warranty does not apply to any products which have been repaired or
altered by persons other than repair personnel authorized by Advantech,
or which have been subject to misuse, abuse, accident or improper instal-
lation. Advantech assumes no liability under the terms of this warranty as
a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous test-
ing, most of our customers never need to use our repair service. If an
Advantech product is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will
be billed according to the cost of replacement materials, service time and
freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, CPU speed, Advantech products used, other hardware
and software used, etc.) Note anything abnormal and list any
onscreen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your man-
ual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
merchandize authorization) number from your dealer. This allows
us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for war-
ranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.

TPC-60S User Manual iv
CE
This product has passed the CE test for environmental specifications.
FCC Class A
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User's Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning.
Use a damp cloth. Do not use liquid or spray detergents for clean-
ing.
4. For plug-in equipment, the power outlet socket must be located
near the equipment and must be easily accessible.
5. Put this equipment on a reliable surface during installation. Drop-
ping it or letting it fall may cause damage.
6. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
7. Make sure the voltage of the power source is correct before con-
necting the equipment to the power outlet.
8. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
9. All cautions and warnings on the equipment should be noted.
10. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
11. Never pour any liquid into an opening. This may cause fire or elec-
trical shock.

v
12. Never open the equipment. For safety reasons, the equipment
should be opened only by qualified service personnel.
13. If one of the following situations arises, get the equipment checked
by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the user's manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
14. Do not leave this equipment in an environment where the storage
temperature may go below -20° C (-4 °F) or above 70° C (158° F).
This could damage the equipment.
15. If one of the following situations arises, get the equipment checked
by service personnel:
a. The Power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment has not work well or you can not get it work
according to user‘s manual.
e. The equipment has dropped and damaged.
f. If the equipment has obvious sign of breakage
16. Never open the equipment. For safety reasons, only quali fied ser-
vice personnel should open the equipment.
17. CAUTION: The computer is provided with a battery-powered real-
time clock circuit. There is a danger of explosion if battery is incor-
rectly replaced. Replace only with same or equivalent type recom-
mended by the manufacture. Discard used batteries according to the
manufacturer’s instructions.

TPC-60S User Manual vi
Wichtige Sicherheishinweise
1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.
2. Heben Sie diese Anleitung für den späteren Gebrauch auf.
3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Ver-
wenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient
ein angefeuchtetes Tuch zur Reinigung.
4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und
leicht zugänglich sein.
5. Das Gerät ist vor Feuchtigkeit zu schützen.
6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten.
Ein Kippen oder Fallen könnte Verletzungen hervorrufen.
7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät
vor überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen
nicht abgedeckt werden.
8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBw-
erte.
9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber
fallen kann.
10. Es sollte auch nichts auf der Leitung abgestellt werden. Alle Hin-
weise und Warnungen die sich am Geräten befinden sind zu
beachten.
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten
Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspan-
nung eine Beschädigung vermieden.
12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder
Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw.
elektrischen Schlag auslösen.
13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der ele-
ktrischen Sicherheit nur von authorisiertem Servicepersonal geöff-
net werden.
14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz
zu trennen und von einer qualifizierten Servicestelle zu überprüfen:
a - Netzkabel oder Netzstecker sind beschädigt.
b - Flüssigkeit ist in das Gerät eingedrungen.
c - Das Gerät war Feuchtigkeit ausgesetzt.
d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend
funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesse

vii
Technical Support and Assistance
Step 1. Visit the Advantech web site at www.advantech.com/support
where you can find the latest information about the product.
Step 2. Contact your distributor, sales representative, or Advantech's cus-
tomer service center for technical support if you need additional
assistance. Please have the following information ready before
you call:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, appli-
cation software, etc.)
- A complete description of the problem
- The exact wording of any error messages
Packing List
Before setting up the system, check that the items listed below are
included and in good condition. If any item does not accord with the
table, please contact your dealer immediately.
• 1 x TPC-60S
• 6 x Panel mounting clamper
• 6 x Panel mounting screw
• 1 x 3-Pin power connector
• 1 x TPC-60S support CD
• 1 x 9-pin to 9-pin null modem cable
• 1 x Microsoft Windows CE end user license agreement *
• 1 x 1.8 meter USB client - USB host cable
• 1 x 6 cm single DB-9 to dual DB-9 serial ports shunting cable
* Only available in the model bundled with Windows CE OS.

TPC-60S User Manual viii

ix
Contents
Chapter 1 General Information ....................................... 2
1.1 Introduction ....................................................................... 2
1.2 Specifications .................................................................... 2
1.2.1 System Kernel ................................................................ 2
1.2.2 I/O Ports ......................................................................... 3
1.2.3 Storage ........................................................................... 3
1.2.4 Safety and Environment ................................................. 3
1.3 LCD Specifications ........................................................... 4
1.4 Touchscreen Specifications............................................... 4
1.5 Power................................................................................. 5
1.6 I/O Ports Arrangement ...................................................... 5
Figure 1.1:I/O Ports Arrangement ................................. 5
1.7 Panel Mounting ................................................................. 6
Figure 1.2:Panel Mounting ............................................ 6
1.8 Exploded Diagram............................................................. 7
Figure 1.3:Assembly Exploded ..................................... 7
1.9 Dimensions and Cutout ..................................................... 8
Figure 1.4:Dimensions and Cutout ................................ 8
Chapter 2 System Setup.................................................. 10
Figure 2.1:Unpack the Package ................................... 10
Figure 2.2:Power Connector and Power Lines ............ 10
Figure 2.3:Pin Assignment on the Power Receptor ..... 11
Figure 2.4:Plug the Power Line to the System Power Re-
ceptor ............................................................... 11
Figure 2.5:Turn on the System .................................... 12
Chapter 3 System Tuning ............................................... 14
3.1 LCD Contrast Tuning...................................................... 14
Figure 3.1:Display ....................................................... 14
Figure 3.2:Display Properties ...................................... 14
Figure 3.3:Advanced Backlight Utility ........................ 15
3.2 Touchscreen Calibration ................................................. 15
Figure 3.4:Style ............................................................ 15
Figure 3.5:Stylus Properties ......................................... 16
Figure 3.6:Touch Screen Calibration ........................... 16
3.3 Buzzer Setting ................................................................. 17
Figure 3.7:Volume & Sounds Settting 1 ...................... 17
Figure 3.8:Volume & Sounds Settting 2 ...................... 17
Figure 3.9:Buzzer Setting 1 ......................................... 18
Figure 3.10:Buzzer Setting 2 ....................................... 18
Chapter 4 Windows CE .NET 4.2 ................................. 20
Figure 4.1:Windows CE on TPC-60S .......................... 20

TPC-60S User Manual x
4.1 TPC Utilities.................................................................... 21
4.1.1 Soft-Keyboard .............................................................. 21
Figure 4.2:Soft-Keyboard ............................................ 21
4.1.2 TPC Configuration ....................................................... 21
Figure 4.3:TPC Configurator ....................................... 22
Figure 4.4:General ....................................................... 22
Figure 4.5:Network ...................................................... 23
Figure 4.6:Advanced Network ..................................... 23
Figure 4.7:WatchDog Setting ...................................... 24
Figure 4.8:Misc Page ................................................... 25
Figure 4.9:Reboot Machine ......................................... 26
Figure 4.10:Registry Saving Success ........................... 27
Figure 4.11:Registry Editor ......................................... 27
4.1.3 Advantech Tools .......................................................... 28
Figure 4.12:Advantech Tools ...................................... 28
Figure 4.13:Remote Display Host Application ............ 29
Figure 4.14:Remote Display Application .................... 30
Figure 4.15:Connect .................................................... 30
Figure 4.16:Remote Display Host Application with the
display of TPC-60S .......................................... 31
Figure 4.17: TPC CE Notepad ..................................... 31
Figure 4.18:TPC Version Information ......................... 32
4.1.4 Other Utilities .............................................................. 33
4.2 Networking...................................................................... 34
4.2.1 Network via Ethernet ................................................... 34
Figure 4.19:Network and Dial-up Connections ........... 34
Figure 4.20:Selected Connection ................................. 35
Figure 4.21:Setting IP Address .................................... 35
Figure 4.22:Setting Name Servers ............................... 36
Figure 4.23:Save Registry ............................................ 36
4.2.2 Network via Serial Port ................................................ 37
Figure 4.24:Make New Connection ............................. 37
Figure 4.25:Select the Device on COM1 ..................... 38
Figure 4.26:Set PC Connections .................................. 38
Figure 4.27:Change Connection .................................. 39
Figure 4.28:Save Registry ............................................ 39
Figure 4.29:Microsoft ActiveSync .............................. 40
Figure 4.30:Select Connection Setting ........................ 40
Figure 4.31:Configure Connection Setting .................. 41
Figure 4.32:Get Connected .......................................... 42
Figure 4.33:Run Repllog.exe on the TPC .................... 42
Figure 4.34:Connection on the TPC ............................ 43
Figure 4.35:Connection on the Host PC ...................... 43
Figure 4.36:Explore the TPC ....................................... 44
4.2.3 Network via USB Client Port ...................................... 44
4.3 Application Program Development................................. 45

xi
4.3.1 System Requirements for Developers .......................... 45
4.3.2 Building Windows CE .NET Runtime ........................ 46
Figure 4.37:Starting a New Project .............................. 47
Figure 4.38:Selecting ................................................... 47
Figure 4.39:Compiling Your Program ......................... 48
Appendix A Watchdog Timer Programming................... 50
A.1 DeviceIOControl ............................................................. 50
A.2 How to Use the Control Code ......................................... 52
A.2.1 IOCTL _WDT_ENABLE: ........................................... 52
A.2.2 IOCTL _WDT_DISABLE: .......................................... 52
A.2.3 IOCTL_WDT_STROBE: ............................................ 52
A.2.4 IOCTL_WDT_GETTIMEOUT: .................................. 53
A.2.5 IOCTL_WDT_SETTIMEOUT: .................................. 53
A.2.6 IOCTL_WDT_REBOOT: ........................................... 53
A.3 Examples ......................................................................... 54
Appendix B Fuse Specifications ........................................ 58
B.1 Fuse Specifications.......................................................... 58
B.2 Fuse Replacement ........................................................... 58
Figure B.1:Fuse Replacement ...................................... 58
Appendix C Pin Assignments ............................................ 60
C.1 RS-232 Pin Assignment .................................................. 60
C.2 RS-485 Pin Assignment .................................................. 60

TPC-60S User Manual xii

2
CHAPTER
1
General Information
This chapter gives background infor-
mation for the TPC-60S.
Sections include:
• Introduction
• Specifications
• LCD Specifications
• Touchscreen Specifications
• Power
• I/O Port Arrangement
• Mounting
• Exploded Diagram
• Dimensions and Cutout

TPC-60S User Manual 2
Chapter 1 General Information
1.1 Introduction
The TPC-60 touch panel computer is a state-of-the-art HMI (Human
Machine Interface). This 5.7” display operator interface is a RISC-based
platform with these key features:
• Bright Display:
The high brightness CSTN LCD display provides a clear interface.
• Fanless:
By using a low power processor, the system does not have to rely on
fans, which often are unreliable, and attracts dust.
• Powerful Communication Capability:
The TPC-60 provides a powerful I/O interface for easy communication
with other devices. The I/O interface includes serial ports, RS-485
port, Ethernet and USB.
• Windows CE Support:
Advantech offers platform support for Windows CE. The optional
Windows CE operating system specifically for the TPC-60 is available
for Windows CE application program builders.
• JVM Support:
TPC-60 is powered by JVM that is compatible with PersonalJava 1.2.
1.2 Specifications
1.2.1 System Kernel
• CPU: Samsung S3C2410A-26 (CPU clock 266 MHz)
• BIOS: Samsung NAND Flash memory
• VGA: Samsung S3C2410A-26 Integrated
• DRAM: Built-in 64MB SDRAM
• Storage Memory: Built-in Samsung 64 MB NAND Flash
• Ethernet: DM9000E 10/100Base-T Ethernet controller; IEEE 802.3u
protocol compatible
• Watchdog Timer: Samsung S3C2410A watchdog timer;
2,5,10,15,30,40 second timeout period option
• CompactFlash: CompactFlash type I/II

3 Chapter1
1.2.2 I/O Ports
• 3 serial ports: two RS-232 (COM1, COM2); one RS-485 (COM4) or
one RS-232(COM3)
• 1 RJ-45 Ethernet port
• 1 PS/2 port: 6-pin mini-DIN port for keyboard or mouse
• 2 USB ports compliant with USB 1.1: one USB Host (Type A) and one
USB Client (Type B)
• 1 CompactFlash 2.0 type I/II slot
1.2.3 Storage
TPC-60S provides two methods for storage. One is the on-board 64 MB
NAND flash and the other one is a CompactFlash card. The system boot-
sequence is:
• If there is no CompactFlash card installed, the system will automati-
cally boot from the on-board NAND Flash.
• CompactFlash card exists only: the system will boot from the Compact-
Flash
1.2.4 Safety and Environment
Safety
• FCC Class A and CE certificated
• BSMI certificated
• The front bezel is compliant with NEMA 4
Environment
• Operating Temperature: 0~50° C
• Storage Temperature: -20~70° C
• Humidity: 10~95% @ 40° C relative humidity (non-condensing)
• Vibration:
10~18 Hz @ 1.5mm peak-to-peak displacement
18~500 Hz @ 1G acceleration
Note TPS-60S provides three serial ports. The third
one can be set as COM3 for RS-232 or COM4 for
RS-485.

TPC-60S User Manual 4
1.3 LCD Specifications
1.4 Touchscreen Specifications
Display Type Color STN LCD
Size (diagonal) 5.7”
Maximum Resolution 320 x 240 (QVGA)
Maximum Colors 256
Pixel Pitch (W x H, mm) 0.12 x 0.36
Viewing Angle 110°
Luminance (cd / m2) 201
Contrast Ratio 35
Operating Temperature (¢J) 0 ~ 50 (Ambient)
Control Contrast Adjustable
Backlight 1 CCFL
LCD MTBF 100,000 hours
Backlight MTBF 40,000 hours
Touch Type Resistive
Base Glass Construction Tempered Glass
Resolution Continuous
Light Transmission 75% typical
Controller SPI (AD7846)
Power Rating 5 VDC
Software Driver Windows CE (embedded)
Durability 100 million touches
Note There is no pointer/cursor shown using the
touch screen. The cursor only appears when
closing or minimizing the window.

5 Chapter1
1.5 Power
• Input Voltage: 24 VDC (the fuse will become an open circuit if input
level exceeds 33 VDC)
• Maximum Current: 2 A
1.6 I/O Ports Arrangement
The TPC-60S provides the 3 serials ports, 1 Ethernet LAN port and 2
USB ports. The arrangement of the I/O ports is shown in Figure 1.1.
Figure 1.1: I/O Ports Arrangement

TPC-60S User Manual 6
1.7 Panel Mounting
There is an adhesive waterproof gasket on the A-Mg front bezel. Make
sure the waterproof gasket is in position before installing the TPC-60 into
the panel opening.
1. Install the TPC-60 to the panel opening.
2. Find the eight clampers and eight long screws in the accessory
pack. Hook these clampers to the holes around the four sides of the
bezel. Insert the screws into every clamper and fasten them. These
screws will then push the mounting panel and fix the unit. The
mounting panel thickness is suggested to be less than 6 mm (0.236
inch).
Figure 1.2: Panel Mounting

7 Chapter1
1.8 Exploded Diagram
Figure 1.3: Assembly Exploded

TPC-60S User Manual 8
1.9 Dimensions and Cutout
• Weight: 0.8 Kg
• Dimensions (WxHxD): 195 x 148 x 44.5 mm
• Cutout: 188 x 141 mm (suggested)
Figure 1.4: Dimensions and Cutout