Combi Travel Solutions Play Yard User manual

Travel 9400 Series
Solutions Play Yard
Instruction Manual
Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR
FUTURE USE. Record the following information for quick reference. Note: Illustrations are only representative
and not actual. Attach copy of sales receipt.
Date Purchased:______________________ Model Number: 9400-_______ Color: ______________________________________
Main Body
Instruction
Manual
Bassinet
Mattress
Pedestal Basket
Pedestal
Legs (x2)
Pedestal
Arms (x2)
Play Yard
Mattress
Bassinet Frame
Storage
Attachment
Travel
Bag
Pedestal Stay Bars
(x2)
Changing Table
with pockets Accessories Bag
Parts List
Make sure you have all the parts listed below before using your Play Yard. If any parts are
missing, call Consumer Affairs at 1-800-99-COMBI.
Canopy
with Soft Toys
Bassinet
Stabilizers (x2)
Long Top
Rails
Short Top
Rails
Wheels Brake
Bassinet Toys
Canopy
Canopy
Attachments
Attachment for
Play Yard
Wheels
Wheel
Brake
Combi USA, Inc. • 1962 HWY 160 W, Suite 100 • Fort Mill, SC 29708 • www.combi-intl.com
Consumer Affairs 1-800-99-COMBI

WARNINGS For your child’s safety:
Failure to follow these warnings and the instructions could result in serious injury or death.
All products specifications are subject to change without notice. Sizes and weights are intended
as guides and are approximations. Combi® reserves the right to modify the products in its line during the
course of the year. Non contractual media. Colors are as accurate as the media in which they appear allows.
©Combi USA, Inc. 2004
Note: Illustrations are for reference only
and may not represent the actual product.
Completely remove all
plastic bags and packing
materials before using this
product to prevent a possible
choking hazard.
DO NOT leave child in
product with sides lowered.
Be sure side is in raised and
locked position whenever
child is in product. Infant may
roll into space between pad
and loose mesh side causing
suffocation.
Before each usage or
assembly, inspect product
for damaged hardware, loose
joints, missing parts or sharp
edges. DO NOT use product if
any parts are missing or broken.
Ask your dealer or contact
Combi for replacement parts
and instructional literature if
needed. DO NOT substitute
parts.
If refinishing, use a nontoxic
finish specified for children’s
products.
Never use plastic shipping
bags or other plastic film as
mattress covers not sold and
intended for that purpose.
They can cause suffocation.
DO NOT use a water
mattress with this product.
Play Yard, including side
rails must be fully erected prior
to use. Make sure all latches
are secure.
WARNING
Infants can suffocate
• In gaps between an extra
mattress and side of product
• On soft bedding
NEVER add a mattress, pillow,
comforter or padding. Use
ONLY mattress/pad provided by
Combi.
Strings can cause
strangulation! DO NOT place
items with a string around
a child’s neck such as hood
strings or pacifier cords. DO
NOT suspend strings over
product or attach strings to
toys.
Discontinue use of the Play
Yard when child is able to climb
out or reaches the height of
35 in.
When child is able to pull
to standing position, remove
bumper pads, large toys, and
other objects that could serve
as steps for climbing out.
DO NOT place Play Yard near
a window where cords from
blinds or drapes can strangle
a child.
FALL HAZARD – To help
prevent falls, do not use
this product when the infant
begins to push up on hands
and knees or has reached
manufacturer’s recommended
maximum weight, whichever
comes first.
If a sheet is used with the
pad, use only the one provided
by the bassinet manufacturer
or one specifically designed
to fit the dimension of the
bassinet mattress
WARNING
FALL HAZARD
To prevent death or serious
injury, always keep child within
arm’s reach. Use waistbelt
provided with changing table.
IMPORTANT:
Play Yard maximum
weight: 30 lbs.
Play Yard maximum
height: 35 inches.
Bassinet maximum
weight: 15 lbs. or
less than 3 months old.
Changing Table maximum
weight: less than 25 lbs.

1. Remove Play Yard from Travel Bag.
2. Remove mattress from around the
Play Yard.
3. While holding the plastic handle to keep the
center of Play Yard floor upright (3a), use
your other hand to, lift short top rails (3b)
until locked into position.
4. Repeat step 3 for both long top rails.
Center of Play Yard floor must remain
upright until all rails are locked.
IMPORTANT: If rails do not lock, lift
center of Play Yard floor higher.
5. Once all sides are locked into position,
extend all corners and press center of floor
down (a) followed by outside edges (b)
Once Play Yard is flat rotate center handle
90°, towards Play Yard floor, to locked
position.
6. Add mattress to Play Yard with soft side up.
DO NOT use Play yard without mattress.
Setting Up Your Play Yard
CAUTION
Always keep the wheels locked
other than when moving the
Play Yard. Failure to do so
may cause the Play Yard to
move unexpectedly.
- 3 -
1
2
3a
5
6
3b
a
b
b
7. Lift lever up to unlock.
Press lever down to lock.
7
IMPORTANT
DO NOT push center of
Play Yard floor down until
all top rails are locked.
Note: Illustrations are only representative and not actual.

1. Remove mattress from Play Yard.
2. Rotate center grip 90°, to upright position.
Pull center of floor upwards (a), followed
by both sides of floor (b).
3. Slightly lift top rail while pressing center
button to release. Once rails release, push
down.
Center of floor must be pulled up for top
rails to release. If rails do not release, lift
center of Play Yard floor higher.
4. Once all top rails are released, fold Play
Yard to standing position.
Folding Play Yard
- 4 -
ab
b

1. With Play Yard in upright position, locate
plastic loop attached to outside of Play Yard
leg. Route top white Velcro strap through
loop on Play Yard and through plastic loop
on opposite side of mattress.
2. With soft side of mattress
facing the Play Yard.
3. Route the two lower Velcro straps through
remaining plastic loops on mattress.
4. Insert Play yard into travel bag, with wheels
and handle exposed for easy travel.
Storing Play Yard
- 5 -
1Plastic Loop
Handle
Wheels
White Velcro
Strap

BASSINET
1 Attach both plastic hooks to both long top
rails of Play Yard as shown.
2. Press down on center of bassinet to ensure
both ends are secure.
Using Accessories with Play Yard
CHANGING TABLE
1 Attach both plastic hooks to Play Yard (end
without wheels) with changing table fac-
ing down and storage pockets facing up, as
shown.
2. Flip changing table over onto top rails of
Play Yard so that changing table is exposed.
3. Attach snaps on fabric panel to snaps
located at the end of Play yard.
4. When changing table is not in use, fold
table over side of Play Yard to be used as a
storage area.
STORAGE ATTACHMENT
1. Attach zipper on storage attachment to the
zipper located at the end of the PlayYard.
(with wheels)
2. Attach plastic hooks to the metal bars on
the lower portion of Play Yard.
Locate unit in Play Yard corner.
1. To operate select desired feature(s).
BATTERY REPLACEMENT Battery not included.
1. Use a Phillips head screwdriver to remove screw
from battery compartment door.
2. Lift the battery compartment door open.
3. Insert two size “C” alkaline batteries, as
indicated inside the battery compartment.
4. Replace the battery compartment door.
Light, Sound and Vibration
Note:
– Remove the battery during long periods of non-
use. Never leave a worn out battery in the Play
Yard. Battery leakage and corrosion can damage
this product.
– Do not attempt to recharge a non-rechargeable
battery.
– Remove a rechargeable battery from the Play
Yard before recharging.
– Avoid Short-circuiting the terminals of the
battery.
– Remove a non-working battery from the Play
Yard.
- 6 -
Plastic Hooks

Diagram B
Pedestal
Legs
Stay Bar
pin locations
USING BASSINET WITH PEDESTAL
Using the Basket
1. Insert one end of both stay bars into the
round openings of the first Pedestal leg.
(See Diagram A) Be sure silver pin locks into
small hole within opening. This locks the
stay bars into the pedestal legs.
2. Insert the other end of both stay bars into
the round openings of the second pedestal
leg. (See Diagram B) Be sure silver pin locks
into small hole within opening. This locks
the stay bars into the pedestal legs.
3. Insert pedestal arms into top joints of
pedestal legs making sure the square
openings are facing up. (See Diagram C)
Be sure silver pins lock into small holes with-
in openings. This locks the stay bars into the
pedestal legs.
1. Place mesh basket inside the pedestal.
2. Wrap elastic bands around corners of
pedestal arms. (See Diagram D)
3. Fasten snaps around stay bars on both
sides. (See Diagram E)
Diagram A
Silver pin
on Stay Bar
Pedestal
Leg
Diagram C
Silver pin locks into
small hole
Assembled Pedestal
Diagram E
Stay Bar
Pedestal
Leg Joint
Diagram D
Snap basket
around Stay
Bar
Stay Bar
pin locations
PEDESTAL ASSEMBLY
- 7-
Note: Holes located on
the inside of the arms.
Pedestal Arm
pin locations

1. Insert both sides of
stabilizer bar into each
end of pedestal.
2. Pull up on each stabalizer
to be sure they are secure.
1. While pressing the tab in with finger, rotate
tab until wheel drops down and “clicks” into
swivel position. (See Diagram F) Diagram F
Tab - push in and
turn down
Attaching Bassinet Stabilizers
Using the Swivel Wheels
1. Push brake levers down to lock.
2. Push brake levers up to unlock.
1. Push brake lever down to lock wheel.
2. Rotate wheel inward with brake lever facing center
of Pedestal leg.
3. Push tab in and retract wheel into pedestal leg.
(See Diagram G)
(Note: Make sure brake lever is in the locked position.
Brake levers must face the center of pedestal and be inserted
into each opening first. This allows the wheels to be totally
retracted.)
Diagram G
Tab
Shown in the locked
position.
Lift lever up to unlock
Brake Lever
Brake Lever
Using the Brakes
Retracting the Wheels
- 8 -
Bassinet
Stabilizers

1. Push metal bars toward ends of bassinet
until they are hooked underneath plastic
hooks on bassinet base.
2. Attach snaps on bassinet cover to snaps on
bassinet base.
3. Add bassinet mattress. DO NOT use
bassinet without mattress.
Attaching Bassinet to Pedestal
4. Place bassinet onto pedestal between both
bassinet stabilizers.
5. Snap bassinet straps around both ends of
pedestal arms on both sides of bassinet.
6. Check underneath bassinet to ensure round
plastic knobs are resting flush against
bassinet stabilizers on both ends.
7. Lift bassinet up to ensure bassinet
is secure.
WARNING:
NEVER use bassinet on pedestal before
attaching all straps to pedestal arms.
Plastic Hooks
(x4)
- 9 -
Metal Bars
Pedestal
Arm
Bottom of
Bassinet
(Illustration shows bassinet
tilted from one end.)

1. Confirm the canopy is facing the proper
direction
2. Attach plastic hooks on canopy to canopy
holders on bassinet.
3. Attach Velcro on canopy to the Velcro on
bassinet cover.
Attaching Canopy to Bassinet
- 10 -
Changing Table Assembly
1. Remove changing table from storage bag.
Pull back fabric cover on each side to locate
metal bars.
2. Insert both sides of changing table frame
into opposite side of frame while pressing
silver pins.
3. Be sure silver pin locks into small hole
within opening.

Routine Maintenance
STORE IN A COOL AND DRY AREA, especially in the summer. Do not store the Play Yard in the trunk
of a vehicle.
MAIN BODY AND BASSINET
Briskly wipe off any mud and dirt. To clean the body, wipe with a damp cloth then wipe out any traces
of moisture on the body with a dry cloth. The main body might become moldy and musty if not wiped
dry.
Excessive exposure to the sun could cause premature color fading of fabric.
MATTRESS AND BAG
DO NOT machine wash. Clean with mild soap and a damp cloth.
- 11 -

For technical questions, please call 1-800-992-6624.
If you would like to place an order for the following parts, please fill out the form below and return
to the following address:
Combi USA, Inc. or Fax this completed form to
Attn: Consumer Affairs
1962 Highway 160 W, Suite 100
Fort Mill, SC 29708-8027
IMPORTANT: We must have this information to process your order:
Model Number: 9400 - ______ Color & Pattern of Fabric: ______________________________________________________
Parts List for the Play Yard (9400 Series) only.
Price Quantity Total
1. Changing Table Mat $ 15.00
2. Storage Attachment 25.00
3. Play Yard Carrying Bag 20.00
4. Bassinet Mattress 15.00
5. Bassinet Mattress Cover 10.00
6. Canopy 25.00
7. Soft Toys (Ball, Bear, Star) 10.00
8. Accessory Bag 15.00
9. Pedestal Basket 10.00
10.
11.
Amount of Order
ADD
Shipping & Handling
Sales Tax (6%)
(SC residents only)
Total
If you need to order other parts for your Play Yard, please call us toll-free
at 1-800-992-6624.
Shipping and Handling Fees: Add $8.00 for orders $34.99 and under. Add
$13.00 for orders $35.00 and over. Note: Additional shipping charges will apply
outside of the Continental U.S. Combi USA reserves the right to change pricing at
any time.
Ship To:
Consumer Name
Street Address
Street Address
City, State, Zip
Telephone Number
11/15/04
803-548-3663
Located on the Play Yard Floor.
Travel 9400 Series
Solutions Play Yard
Instruction Manual
Charge to my credit card:
o VISA o MASTERCARD
o AMERICAN EXPRESS o DISCOVER
Card Number
Expiration Date __________ - ___________ - ____________
Cardholder’s Signature
o Check enclosed
Combi USA, Inc. • 1962 HWY 160 W, Suite 100 • Fort Mill, SC 29708 • www.combi-intl.com
Consumer Affairs 1-800-99-COMBI