Comfort Products Onespace Eleanor 50-1617WD05 User manual

Eleanor Writing Desk, Black Wood Grain
ASSEMBLY INSTRUCTIONS
MODEL 50-1617WD05
SUPPLIER CODE: SPRG
For fastest service on claims, requests for replacment parts,
www.comfortproducts.net/support
e-mail: [e-mail]
Keep your sales receipt as documentation of your ownership.
CUSTOMER SERVICE
or questions, please visit our website at:
OneSpace is a Trademark of Comfort Products, Inc.
™

#
DESCRIPTION
STOCK #
QTY.
1 Left Corner
Board, Front
51-1617WD05A1
2Left Board 51-1617WD05B1
3 Left Corner
Board, Back
51-1617WD05C1
4
Trim Board 51-1617WD05D2
5Right Corner
Board, Front
51-1617WD05C1
6 Right Board 51-1617WD05E1
7 Right Corner
Board, Back
51-1617WD05A1
8 Back Board 51-1617WD05F1
9Center Board 51-1617WD05G1
10
Support Board 51-1617WD05H1
PARTS LIST1 OF2(50-1617WD05)
THE PART NUMBER CAN BE FOUND ON THE SIDE OF THE PART, EITHER STAMPED OR ON A STICKER.
ITEMS ARE NOT SHOWN TO SCALE.
11 Desktop 51-1617WD05DT 1
飞
Page 2 of 12

#
DESCRIPTION
STOCK #
QTY.
12 51-1617WD05J1
13
Wide Drawer
Front
51-1617WD05K2
14
Drawer
Left Board
Drawer
Right Board
51-1617WD05L
15
Wide Drawer
Back Board
51-1617WD05M1
2
16 51-1617WD05N1
17 Narrow Drawer
Front Board
51-1617WD05O1
18
Wide Drawer
Bottom Board
Narrow Drawer
Back Board
51-1617WD05P1
19
51-1617WD05Q1
20
21
Narrow Drawer
Bottom Board
51-1617WD05DS 2 sets
of 4
PARTSLIST2OF2(50-1617WD05)
THE PART NUMBER CAN BE FOUND ON THE SIDE OF THE PART, EITHER STAMPED OR ON A STICKER.
ITEMS ARE NOT SHOWN TO SCALE.
Outer Drawer
Rollers
Inner Drawer
Rollers
Page 3 of 12

PART DESCRIPTION QT Y.
A Bolt 35
FM4 x 22MM 3
ILarge Handle 1
B2 8
IF YOU ARE MISSING ANY OF THESE PARTS,
OR IF YOU HAVE A DAMAGED PART, PLEASE
VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT
REFERENCE THE MODEL # ON THE FRONT OF
THIS MANUAL. SIMPLY COMPLETE THE INFORMATION,
INCLUDING THE PART YOU NEED. THE PART WILL
NORMALLY BE SHIPPED WITHIN 48 HOURS.
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED .
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE A SCREWDRIVER BEFORE YOU BEGIN ASSEMBLING
(NOT INCLUDED).
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE A POWER DRILL.
HARDWARE LIST (50-1617WD05)
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
HARDWARE KIT
STOCK # 51-1617WD05HA
C
J
Dowel
Sticker
12
B1 Large Cam
Small Cam
27
D M4 x 14MM 16
E M5 x 40MM 8
G Nut 2
H Small Handle 1
14
Extra Hardware (A - G) 1 set
Page 4 of 12

DX8
Attach a Left Outer Roller (20) to the Left Board (2) with two Screws (D).
Attach a Right Outer Roller (20) to the Right Board (2) with two Screws (D).
Attach a Left Outer roller (20) to one side of the Center Board (9) and a
Right Outer Roller (20) to the other side with four Screws (D).
Refer to the drawings for which holes in the rollers to use.
Insert twelve Dowels (C) into the boards shown below.
STEP 1
CX12
20 Right 20 Left
20 Right
20 Left
20 Right
20 Left
20 Right
Page 5 of 12
(50-1617WD05)

ASSEMBLY INSTRUCTIONS (50-1617WD05)
STEP 3
Fix eighteen Bolts (A) to the Boards shown below.
Insert twelve Large Cams (B1) into the Left (2) and Right (6) Boards. Make sure the arrows are pointing toward the holes where
the bolts go in.
Attach the Left Corner Boards, Front (1) and Back (3) to the Left Board (2) and one Trim Board (4) by inserting the
Bolts and turning the Cams clockwise half a turn to lock into place. At the same time, insert the dowels of the Trim Board (4)
into the holes of the Front and Back Boards.
Attach the Right Corner Boards, Front (5) and Back (7) to the Right Board (6) and the other Trim Board (4) in the same way.
STEP 4
20 Right
20 Left
2
1
3
5
6
7
5
6
7
4
20 Left
20 Right
A x 18
B1 x 12
1
2
3
44
PLACE PART 4 ON THE
OPPOSITE SIDE
CAUTION:
Do not overtighten
cams.
A
B1
Page 6 of 12

Fix a Bolt (A) to the Back Board (8). Insert one Large Cam (B1) into the
Center Board (9), making sure the arrows are pointing toward the holes
for the Bolt. Attach the Center Board to the Back Board by inserting the
Bolts and tightening the Cams clockwise half a turn.
Fix two Bolts (A) to the Center Board (9). Insert two Small Cams (B2) into
the Support Board (10). Attach the Support Board to the Center Board.
ASSEMBLY INSTRUCTIONS (50-1617WD05)
A X 3
B1 X 1
Page 7 of 12
B2 X2
Insert four Large Cams(B1)into the Back Board (8) and two
Small Cams (B2) into the Support Board (10).
B2 X2
B1 X4

10
10
shown. Align the Bolts in the Desktop (11) with the holes and the Dowels in
the lower part of the desk. Lower the Desktop making sure all Bolts and
Fix ten Bolts (A) to the underside of the Desktop (11).
ten
ASSEMBLY INSTRUCTIONS (50-1617WD05)
Page 8 of 12

ASSEMBLY INSTRUCTIONS (50-1617WD05)
STEP 9
Fix two Bolts (A) to the Wide Drawer Front (12) and two Bolts to the Narrow Drawer Front (17).
Slide Drawer Bottom A (16) into
the grooves. Align the groove in
the Wide Drawer Back (15) with the
Drawer Bottom and fasten it to the
Right (14) and Left (13) Drawer
Boards using four Screws (E).
Attach the Small Handle (H) to the
Drawer Front (17) using one Screw (F2).
STEP 10
Insert one Small Cam (B2) into the
Drawer Right Board (14) and one into the
Drawer Left Board (13). Making sure the
grooves are aligned, attach the Wide
Drawer Front (12) to the Right and Left
Boards by inserting the Bolts and
tightening the Cams.
A
13
14
12
15
16
13
14
12
12
A x 4
B2 x 2
H x 1
Fx 1
E x 4
12
17
Page 9 of 12

Insert one Small Cam (B2) into the
Drawer Right Board (14) and one into
the Drawer Left Board (13). Making
sure the grooves are aligned, attach
the Narrow Drawer Front (17) to the
Right and Left Boards by inserting the
Bolts and tightening the Cams.
ASSEMBLY INSTRUCTIONS (50-1617WD05)
STEP 11
17
13
1418
19
17 17
14
13
F
B2 x 2
G
G x 2
F x 2 Ix 1
E x 4
Slide Drawer Bottom B (19) into the
grooves. Align the groove in the
Narrow Drawer Back (18) with the Drawer
Bottom and fasten it to the Right (14) and
Left (13) Boards using four Screws (E).
Attach a Large Handle (I) to the
Drawer Front (17) using two
Screws (F) with two Nuts (G).
STEP 12
Flip over the assembled narrow drawer and attach a Right Inner Roller (21) and Left Inner Roller (21) with four Screws (D).
The wheels should be at the back of the drawer. Use the outer holes for the screws as shown in the drawing.
Repeat this step for the wide drawer.
21 Right
21 Right
21 Right
D X 12
Page 10 of 12

ASSEMBLY INSTRUCTIONS (50-1617WD05)
STEP 13
Align the inner and outer rollers and insert the drawers. Place the Stickers (J) over the
exposed Cams.
J X 14
Page 11 of 12

•
•
•
•
DO NOT stand on the desk. Do not use the desk as a stepladder.
ed.
Every 6 months, check all bolts and screws to ensure they are tight.
This product is California 93120 Compliant for Formaldehyde.
Comfort Products, Inc.
122 Gayoso Avenue, Suite 101
Memphis, TN 38103
www.comfortproducts.net
email: [email protected]
OneSpace is a Trademark of Comfort Products, Inc.
™
PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION
Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by
Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’ authorized dealers
as shown by the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of
parts at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts
to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is
performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or
disassembly; defects occurring after purchase due to product modification, intentional damage, fire, misuse, negligence, or exposure
to the elements; labor or assembly cost. This warranty does not cover the cost of transportation or labor. In no event shall Comfort
Products be liable in either tort or contract for any loss or direct, special, incidental, consequential or exemplary damages. This Limited
Warranty is NOT applicable to end-user customers who use Comfort Products for rental purposes. This warranty applies only to end-user
customers in the United States. All warranties are limited to the original purchaser for normal use. The weight capacity of the desktop is
110 pounds and the weight capacity of the drawers is 11 pounds each. For claims or questions concerning this warranty, please visit:
www.comfortproducts.net or email us at: [email protected]
MODEL: 50-1617WDES
Page 12 of 12