Comfort Products SPRG User manual

Contemporary Glass Writing Desk, Steel Frame, White & Cool Blue
ASSEMBLY INSTRUCTIONS
MODEL 50-HD0107
SUPPLIER CODE: SPRG
OneSpace is a Trademark of Comfort Products, Inc.
™

2
mumixamDesktop
weight capacity
=
110 lbs.

HARDWARE KIT
STOCK # 51-HD0107HA
PART DESCRIPTION QTY
STOCK NO
3
REPLACEMENT PARTS
IF YOU ARE MISSING ANY OF THE PARTS ABOVE, OR IF YOU HAVE A DAMAGED PART, PLEASE VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT.
REFERENCE THE MODEL # ON THE FRONT OF THIS MANUAL. SIMPLY COMPLETE THE INFORMATION, INCLUDING THE PART YOU NEED.
THE PART WILL NORMALLY BE SHIPPED WITHIN 48 HOURS.
- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.
- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.
- OPEN THE HARDWARE AS NEEDED.
- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.
- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.
- HAVE THE TOOLS BELOW BEFORE YOU BEGIN ASSEMBLING.
- NEVER FORCE THE SCREWS OR FITTINGS.
- KEEP THIS MANUAL FOR FUTURE REFERENCE.
- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.
- DO NOT SHIFT OR DRAG THE PRODUCT AFTER ASSEMBLY.
CLEANING AND CARE
- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.
- DO NOT USE ABRASIVE CLEANERS.
- DO NOT USE FURNITURE WAX OR POLISH AS THE UNIT
IS FINISHED WITH A PROTECTIVE CLEAR LACQUER.
1
- THE FOLLOWING TOOLS ARE NOT INCLUDED.
51-HD0107LGL
Left Leg
1
1
51-HD0107LGRRight Leg2
1
51-HD0107DF
Desktop
Frame
3
1
51-HD0107BBBack Bar
4
PART DESCRIPTION QTY
4
A
8B
4
C
12
4
1
1
D
PARTS AND HARDWARE LIST
EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.
251-HD0107SBSupport Bar
5
1
51-HD0107DTDesktop6
M6X45MM
M6X35MM
M6X12MM
Washer
Foot
Allen Wrench
Extra Hardware Pack
(A-D)
E
F

4
ASSEMBLY INSTRUCTIONS
STEP 1
Screw the Feet (E) into the Legs (1 & 2).
E x 4
1 2

5
ASSEMBLY INSTRUCTIONS
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED
STEP 2
Attach the Legs (1& 2) to the Desktop Frame (3) and the Back Bar (4) using eight Screws (B) and eight Washers (D).
Make sure the screw holes circled below are facing the back. Do not tighten the screws completely until the
Desktop (6) is attached.
B x 8
D x 8
F
1
2
3
4
These holes should
face the back.