COMMAND TOOLS 207012 User manual

Do it your way
1
SOLDERING IRON/BLOW TORCH - BUTANE
Part Numbers: 207012 & 207023
INSTRUCTION MANUAL
PLEASE NOTE: TORCH IS SUPPLIED EMPTY; FILLING WILL BE REQUIRED PRIOR TO USE. WE RECOMMEND
COMMAND GAS BUTANE GAS REFILL 200G, PART NUMBER 207078.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS AND WARNINGS MAY RESULT IN DAMAGE TO PROPERTY,
SERIOUS PERSONAL INJURY OR DEATH.
THE BUTANE SOLDERING IRON/BLOW TORCH HAS
ADJUSTABLE TEMPERATURE CONTROL WHICH
ALLOWS YOU TO TACKLE A VARIETY OF TASKS IN
AND AROUND THE HOME OR WORKPLACE. EASY TO
OPERATE, AND BEING FULLY PORTABLE MAKES THE
COMMAND GAS SOLDERING IRON/BLOW TORCH THE
IDEAL CHOICE FOR SOLDERING, HEATING, SHRINKING,
CUTTING AND MELTING APPLICATIONS. COMES
COMPLETE WITH ALL THE TIPS AND ACCESSORIES YOU
WILL REQUIRE.
PARTS
1. Gasrefillingvalve
2. FuelStorageTank
3. Gas/flameAdjustmentSlide
4. ContinuousFlameSwitch
5. Stand
6. LockCollar
7. BlowTorch
8. SolderingBase
9. Solderingtip
10.Exhaustvent
11.FlameOButton
12.Ignitionlockswitch(ChildResistantFeature
13.PiezoignitionButton
FEATURES
Heatsupto1300°C
Adjustableflamecontrol
Quickheatup
Piezoignition
Builtinstand
1.
2. 3. 4.
5.
6. 7. 8. 9.
10.11.
12.
13.
FILLING/REFILLING GAS
Ensurethegas/flameadjustmentslideisinthe“1”position
(o)andtorchhascooleddownnaturallybeforerefillingwith
gas.
Holdthetorchinanupsidedownposition.
Insertthebutanecartridgerefillnozzleintotherefillingvalve
andpushdown.
Stoprefillingwhenthegasstartstooverflow.Donotoverfill.
ThesolderingIron/blowtorchshouldneverbecompletely
filled,overfillingcouldcausetheflametospit.
TO IGNITE
Movethegas/flameadjustmentslidetothemidposition
betweennumbers2and3.
HoldingthesolderingIronInyourhand,useyourthumbto
pressdownontheignitionlockswitchandatthesametime
pushthepiezoignitionbuttoninadownwardsdirection
Foraconstantflame,beforereleasingthepiezoignition
button,useyourIndexfingertoslidethecontinuousflame
switchtothele.
Adjustflamelevelwiththegas/flameadjustmentslide.
a.Movetowardsposition“4”toincrease
b.Movetowardsposition“1”todecrease
TO EXTINGUISH
ThesolderingIron/blowtorchIsfittedwithaflameobutton,
pressingthiswilltemporarilystopthegasflow,butremember
thesolderingassemblywillstillbeextremelyhot.
ToturnthesolderingIrono,movethecontinuousflame
switchtotherightandthenmovethegas/flameadjustment
slidetothe“1”position.Thiswillcutothegassupplyand
extinguishthesolderingiron.

Do it your way
2
HOT AIR
Unscrewthesolderingtip(counterclockwise)fromthe
solderingbase.
TIPS
Youmayinstallvarioustipsontothehotblowerassembly
fordierentoperations,ifyouhaven’tpurchasedthekit
(CommandgaspartNo.207023)andrequireadditionaltips,
youcanpurchasePartNo.2080454pcetipsetwhichwill
provideyouwithvarioustipsforavarietyoftasks.
CAUTION:Pleaseonlyassemblethepartsifthetooliscoldor
aersolderingironhascooleddown.
WARNING
Toavoidinjuryordamageonlyignitethetorchwhenclear
offace,hand,clothingorcombustiblematerials
Theburnerbecomesextremelyhotduringandaer
operation.
Caremustbetakentoavoidaccidentalburns.
Ensuretheflameiscompletelyoutaeruse.
Protectfromdirectsunlight.Donotexposetotemperature
above50°C/120°F.
Containsflammablegasunderpressure.Donot
disassemble,puncture,orincinerateaeruse
Keepoutofreachofchildren
SAVE THESE INSTRUCTIONS
DO NOT DISCARD THESE WARNINGS AND
INSTRUCTIONS
DISTRIBUTEDBY
TRADEPEMINDUSTRIALPTYLTD
WWW.COMMANDTOOLS.COM.AU