Commell LV-67N-G User manual

LV-67N
Mini-ITX Motherboard
User’s Manual
Edition 1.0
2013/10/07

LV-67N User’s Manual
-1-
Copyright
Copyright 2013, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and protected by copyright. No part of
this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of
their respective owners. Disclaimer
The company shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to
notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT

LV-67N User’s Manual
-2-
Dual COM PORT Cable x 1
(OALES-BKU2)(Option)
(1040087)
I/O Shield x 1
(OPLATE-MCDLA)
(1270055)
Packing List:
Please check the package content before you starting using the board.
Hardware:
LV-67N Mini-ITX Motherborad x 1
Cable Kit:
SATA Cable x 2
(OALSATA3-L)
(1040529)
Printed Matters:
Driver CD (Including User’s Manual) x 1
USB2.0 Cable x 1
(OALUSBA-1)
(1040172)
USB3.0 Cable x 1
(OALUSB3)(Option)
(1040531)
DVI VGA Cable x 1
(OALDVIVGA)
(1040078)

LV-67N User’s Manual
-3-
Index
Chapter 1 <Introduction> ............................................................................6
1.1 <Product Overview>.....................................................................................6
1.2 <Product Specification>................................................................................7
1.3 <Mechanical Drawing>.................................................................................8
1.4 <Block Diagram>..........................................................................................9
Chapter 2 <Hardware Setup>....................................................................10
2.1 <Connector Location>................................................................................10
2.2 <Jumper Location & Reference>................................................................ 11
2.3 <Connector Reference>.............................................................................12
2.3.1 <Internal Connectors> ...................................................................12
2.3.2 <External Connectors>..................................................................12
2.4 <CPU and Memory Setup> ........................................................................13
2.4.1 <CPU installation>.........................................................................13
2.4.2 <Memory Setup> ...........................................................................14
2.5 <CMOS & ATX Setup>...............................................................................15
2.6 <Serial ATA Interface>................................................................................16
2.7 <Ethernet Interface>...................................................................................17
2.8 <Onboard Display Interface> .....................................................................18
2.8.1 <Analog Display>...........................................................................18
2.8.2 <Digital Display>............................................................................19
2.8.3 <VGA Interface> ............................................................................23
2.9 <Integrated Audio Interface>......................................................................24
2.10 <USB Interface>.......................................................................................26
2.11 <Serial Port>.............................................................................................28
2.12 <PCIE Mini Card and SIM Interface> .......................................................31
2.12.1 <SIM Setup>................................................................................33
2.13 <GPIO and SMBUS Interface>.................................................................35
2.14 <Power Supply and Fan Interface >.........................................................36
2.14.1 <Power Input> .............................................................................36

LV-67N User’s Manual
-4-
2.14.2 <Fan connector>..........................................................................37
2.15 <Switch and Indicator>.............................................................................38
Chapter 3 <System Setup>........................................................................39
3.1 <Audio Configuration>................................................................................39
3.2 <Display Properties Setting> ......................................................................40
3.3 <SATA configuration> .................................................................................42
3.4 <SATA RAID Configuration>.......................................................................43
Chapter 4 <BIOS Setup>............................................................................45
Appendix A <I/O Port Pin Assignment>....................................................47
A.1 <Serial ATA Port> .......................................................................................47
A.2 <IrDA Port>.................................................................................................47
A.3 <LAN Port>.................................................................................................47
Appendix B <Flash BIOS>.........................................................................48
B.1 <Flash Tool>...............................................................................................48
B.2 <Flash BIOS Procedure> ...........................................................................48
Appendix C <Programming GPIO’s>........................................................49
Appendix D <Programming Watchdog Timer >.......................................50
Contact Information...................................................................................51

LV-67N User’s Manual
-5-
(This page is left for blank)

LV-67N User’s Manual
-6-
Chapter 1 <Introduction>
1.1 <Product Overview>
LV-67N the 4th Generation Intel of the Mini-ITX Motherboard , supports 4th Generation
Intel® Core™ i7, Core™ i5, Core™ i3, Celeron, Pentium Desktop Processor and
features Intel Q87 chipset, integrated HD Graphics, DDR3 memory, REALTEK High
Definition Audio, Serial ATAIII with RAID function for a system and Intel Gigabit LAN.
Intel Haswell Processor
The 4th Generation Intel® Core™ processor family desktop is the next generation of
64-bit, the processors are based on Intel® microarchitecture formerly known as Haswell,
manufactured on 22nm process technology with 3-D tri-gate transistors.
Features for Intel Q87 chipset
The board integrates Intel Q87 chipset, supports integrated HD Graphics, built-in high
speed mass storage interface of Serial ATAIII interface with RAID function, High
Definition Audio with 2 channels surrounding sound.
Flexible Extension Interface
The board provides, two mini-PCIE socket, one SIMM socket and one PCIE X16 slot.

LV-67N User’s Manual
-7-
1.2 <Product Specification>
General Specification
Form Factor Mini-ITX motherboard
CPU Supports 4th Generation Intel® Core™ i7/ i5/ i3/ Celeron/ Pentium Desktop
Processor.
Package type: FCLGA1150
Memory Two DDR3/DDR3L (support 1.5V) 1333/1600 DIMM up to 16GB
Support Non-ECC, unbuffered memory only
Chipset Intel Q87 Express chipset
Real Time Clock Chipset integrated RTC with onboard lithium battery
Watchdog Timer Generates a system reset with internal timer for 1min/s ~255min/s
Power Management Supports ACPI 4.0 compliant
Serial ATA Interface Intel® Q87 PCH built-in 4 x Serial ATAIII interface up to 600MB/s Support
RAID 0, 1, 5, 10 and Intel Rapid Storage Technology.
(not support SATA II device)
VGA Interface Intel® Clear Video integrated HD Graphics Technology
DVI Interface Onboard DVI connector
LVDS Interface Onboard 24-bit dual channel LVDS connector with +3.3V/+5V/+12V supply
Display port Interface Onboard Display port connector
Audio Interface Intel® integrated Q87 with Realtek ALC888 HD Audio.
LAN Interface 1 x Intel® I210 Gigabit LAN
1 x Intel® I217-LM Gigabit LAN
GPIO interface Onboard programmable 8-bit Digital I/O interface
Extended Interface One PCIE X 16 slot, Two PCIE Mini card, One SIM socket
(Optional support mSATA(SATAIII) for Mini_Card1)
Internal I/O Port 2 x RS232, 1 x GPIO port, 1 x Audio connector, 1 x IrDA connector, 1 x
SMBUS connector, 1 x CRT, 1 x LVDS, 1 x LPC, 4 x USB2.0 and 2 x USB3.0
ports, 4 x SATAIII
External I/O Port 1 x PS/2 Keyboard/Mouse Port, 1 x RS232, 1 x RS232/422/485, 1 x DVI port,
1 x Display port, 2 x RJ45 LAN ports and 4 x USB3.0 ports.
Power Requirement Standard ATX 24-pin (20-pin is compatible) power supply and P4 4-pin 12V
Dimension 170mm x 170mm
Temperature Operating within 0~60 centigrade
Storage within –20~85 centigrade
Ordering Code
LV-67N Onboard DVI, Display Port, CRT, LVDS, 2 x Gigabit LAN, USB3.0 & 2.0,
Serial Port, SATAIII, IrDA, Realtek HD Audio, PCIE Mini card, PCIE x16,
SMBUS, GPIO, SIM, LPC, mSATA
The specifications may be different as the actual production.
For further product information please visit the website at TUhttp://www.commell.com.twUT

LV-67N User’s Manual
-8-
1.3 <Mechanical Drawing>

LV-67N User’s Manual
-9-
1.4 <Block Diagram>
Q87
W25Q128 SPI
1 x Intel I210
1 x Intel I217-LM
1 x RS232/422/485
1 x RS232 & GPIO & IrDA
& LPC
1 x PS/2
4th Generation Intel® Core™ i7,
Core™ i5, Core™ i3, Celeron,
Pentium Processor
1 x PCI Express x16
2 x 240-pin DDR3
LO-DIMM
1333/1600 MHz
up to 16GB
W83627DHG-P
1 x LVDS
4 x Serial ATAIII
6 x USB 3.0
4 x USB 2.0
2 x PCI Express mini card
1 x DVI
1 x CRT
2 x RS232
ALC888 HD Audio
F81216
1 x Display port

LV-67N User’s Manual
-10-
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
PS2 USB_RJ45_1/2 Audio
DVI
Display Port
COM1+COM2
MINI_CARD1
MINI_CARD2
CN_DIO
CPUFAN
CN_12V
CN_INV
CN_LPC
CN_AUDIO
CN_COM3/4 CN_CRT CN_LVDS
CN_IR
CN_SMBUS
CN_USB3
CN_SIMM
JFRNT
SYSFAN DDRIII_A/B ATX
S_ATA3/S_ATA4
S_ATA1/S_ATA2
CN_USB1/2

LV-67N User’s Manual
-11-
2.2 <Jumper Location & Reference>
Jumper Function
JRTC CMOS Operating/Clear Setting
JVLCD Panel Voltage Setting
JAT Power mode select
JP1 Com1 Voltage Setting (For Pin 9)
JP2 Com2 Voltage Setting (For Pin 9)
JCSEL1
JCSEL2 COM2 RS-232 RS422 RS485 Setting
CN_IR IrDA Setting
JVUSB USB Voltage Setting
JMSATA Mini Card1 mSATA Setting
JVLCD
JRTC
JAT
JP1
JP2
JVUSB
JCSEL1
JCSEL2
JMSATA

LV-67N User’s Manual
-12-
2.3 <Connector Reference>
2.3.1 <Internal Connectors>
Connector Function Remark
CPU LGA1150 CPU Socket
SO-DIMM 1/2 240 -pin DDR3 LO-DIMM socket
SATAIII 1/2/3/4 7-pin Serial ATAIII connector
DC_12V 4-pin +12V additional power supply connector
ATX 24-pin power supply connector
CN_AUDIO 5 x 2-pin audio connector
CDIN 4-pin CD-ROM audio input connector
CN_DIO 6 x 2-pin digital I/O connector
CN_USB 1/2 10-pin USB connector
CN_USB3 20-pin USB3.0 connector
CPUFAN 4-pin CPU cooler fan connector
SYSFAN 3-pin system cooler fan connector
CN_CRT 16-pin VGA connector
CN_LVDS 20 x 2-pin LVDS connector
CN_INV 5-pin LCD inverter connector
CN_IR 5-pin IrDA connector
CN_COM 3/4 9-pin RS232
CN_LPC 5 x 2-pin LPC connector
JFRNT 14-pin front panel switch/indicator connector
PCIE 164-pin x16 PCIE slot
Mini-PCIE1/2 2 x 52-pin Mini-PCIE socket
SIMM 6-pin socket
JAT Power mode select
JSPD 1/2 LAN Speed LED connector
JACT 1/2 LAN Activity LED connector
2.3.2 <External Connectors>
Connector Function Remark
USB_RJ45 1/2 2 x USB3.0 and 1 x RJ45 LAN connector
DVI + Display port DVI connect and Display port connector
COM 1/2 Serial port connector
PS/2 PS/2 keyboard and mouse connector
AUDIO Audio connector

LV-67NUser’sManual
-13-
2.4 <CPU and Memory Setup>
2.4.1 <CPU installation>
LV-67N has a LGA1150 CPU socket onboard; please check following steps to install the
processor properly.
Attention If LV-67N need RMA please Keep CPU socket cover on the CPU Socket.
Warning If CPU Socket internal Pin damage We could not provide warranty.
Notice: Please place the CPU on the pins tenderly to avoid bending the pins
Intel® I3/I5/I7/Celeron/Pentium processor Package
type: 1150 pin FCLGA
FSB:1333/1600MHz
1. Lift this bar
2. Uncover this plate
4. Lock this bar
3. Place the CPU on the top of
the pins
Checked point
5. Cover this plate

LV-67NUser’sManual
-14-
2.4.2 <Memory Setup>
LV-67N has two 240-pin DDR3/DDR3L DIMM support up to 16GB of memory capacity
and 1.5 Voltage. The memory frequency supports 1333/1600 MHz. Only Non-ECC
memory is supported.
DDRIII_A
DDRIII_B
Please check the pin number to match the socket side well
before installing memory module.

LV-67NUser’sManual
-15-
2.5 <CMOS & ATX Setup>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting: 2-3
Jumper: JAT
Type: onboard 3-pin jumper
JAT Mode
1-2 AT Mode
2-3 ATX Mode
Default setting:2-3
JRTC
JAT
1
3
1
3

LV-67NUser’sManual
-16-
2.6 <Serial ATA Interface>
LV-67N has Four SerialATA III interfaces with RAID function, the transfer rate of the
Serial ATA III can be up to 600MB/s, but not supports SATAII device. Please go to
http://www.serialata.org/ for more about Serial ATA technology information. Based on
Intel® PCH, it supports Intel® Matrix Storage Technology with combination of RAID
0,1,5 and 10. The main features of RAID on Intel® Q87 PCH are listed below:
1. Supports for up to RAID volumes on a single, two-hard drive RAID array.
2. Supports for two, two-hard drive RAID arrays on any of six Serial ATA ports.
3. Supports for Serial ATAATAPI devices.
4. Supports for RAID spares and automatic rebuild.
5. Supports on RAID arrays, including NCQ and native hot plug.
For more information please visit Intel’s official website.
For more about the system setup for Serial ATA, please check the chapter of SATA
configuration.
SATA1 SATA2
SATA3 SATA4

LV-67NUser’sManual
-17-
2.7 <Ethernet Interface>
The board integrates with one Intel I210 Gigabit Ethernet & one Intel I217-LM controllers,
as the PCI Express bus. The Intel I210 & I217-LM supports triple speed of
10/100/1000Base-T, with IEEE802.3 compliance and Wake-On-LAN supported.
Onboard Intel® I217-LM GbE controller support Intel® AMT 9.0 feature on primary LAN
port. The BIOS is ready to support Intel® AMT 9.0 feature. The necessary prerequisite is
your CPU must support Intel® vPro technology, ex : Intel® Core™ i7
For further instruction about the Intel® AMT features and set up, please refer to the
iAMT Setting.pdf.
RJ45 LAN connector
I210
I217-LM

LV-67NUser’sManual
-18-
2.8 <Onboard Display Interface>
Based on Intel Q87 chipset with built-in HD Graphic, the board provides one DVI
connector & one Display port on real external I/O port, one 40-pin LVDS interface with
5-pin LCD backlight inverter connector and provides 16-pin VGA interface.
The board provides dual display function with clone mode and extended desktop mode
for DVI, Display port, VGA and LVDS.
2.8.1 <Analog Display>
Please connect your DVI & Display port or LCD monitor with male connector to the
onboard female connector on rear I/O port .
DVI
Display port