Commercial Electric 5028 User manual

□□
1
Installation
2
Use a drywall saw or utility knife (not included) and the included
template to cut a hole in your install location. Then route your
cables through the opening in the wall.
PREPARING THE INSTALL LOCATION ROUTING THE CABLES
Installation Guide
Flexible Opening Cable Wall Plate
Item # 152354, 167974, 169089
Model #5028
PACKAGE CONTENTS
1 Flexible Opening Cable Wall Plate
TOOLS NEEDED
Drywall Saw or Utility Knife
#2 Phillips head screwdriver
Route your low voltage cables through the opening in the back
of the Flexible Opening Cable Wall Plate and out through the
front of the Plate.
RoHS Compliant
This product is patent protected by
U.S. Patent number: 7495171
□□
3 4
Secure the Plate to the wall using a #2 Phillips head screwdriver
to tighten the attached screws with wings. TIGHTEN BY HAND
WITH SCREWDRIVER AND DO NOT OVER-TIGHTEN THE SCREWS.
INSTALLING THE PLATE INSTALLATION COMPLETE
Installation is complete. You can now connect your home theater
devices and equipment.
* The use of power tools is not recommended.

RoHS Compliant
This product is patent protected by
U.S. Patent number: 7495171
CAUTION: When using tools always follow the
manufacturer’s safety guidleines.
Please read all instructions and safety information before use.
Retain this manual for future reference.
Template
Item # 152354, 167974, 169089
Model #5028
2-1/4”
4”
CUT ALONG DOTTED LINE 