Commercial Electric HPKA315CWB User manual

THANK YOU
USER GUIDE
Smart Outlet
We appreciate the trust and confidence you have placed in Commercial Electric
through the purchase of this Smart Outlet. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing
Commercial Electric!
Item #1006368004
Model #HPKA315CWB

WARNING:
Safety Information
FCC Regulation
Make sureto use this product together with 15A circuit breaker in the upstream.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Responsible Party
Leedarson America, Inc. 300 Technology Court SE Suite 100; Smyrna,
GA 30082 1-678-293-8382
Unique Identifier: HPKA315CWB (SKU # 1006368004)
For indoor use only. Do not use in wet locations.
The total current limit of the device is 15 Amp. To avoid
damage, do not exceed the 15 Amps limit. If a direct short is
created on the output, the Smart Outlet will be damaged and
no longer function. Do not disassemble the product or make
repairs yourself. You run the risk of electric shock and
voiding the limited warranty. If you need service, please
contact Customer Support.
Contains FCC ID: 2AB2Q-LA02301
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 cm between the radiator
and any part of your body.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
-2-

FCC Regulation
Wireless Protocol
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
—Consult the dealer or an experienced radio/TV technician for help.
Apple and the Apple logos are trademarks of Apple, Inc., registered in
the U.S., and other countries. App Store is a service mark of Apple Inc.
Google and Google Play are trademarks of Google LLC.
-3-

1 YEAR LIMITED WARRANTY
Warranty
Package Contents
Part Description Quantity
ASmart Outlet 1
B Wall Plate 1
C
D
Screws for Outlet
User Guide
2
1
E Quick Start Guide 1
D
This product is guaranteed to be free of defects in
materials and workmanship for 1 year from the date of
purchase. Guarantee does not include normal wear and
tear.
E
HUBSPACEAPP QUICK START GUIDE
-4-
A B C
5003280
THANKYOU
USER GUIDE
Smart Outlet
Weappreciate the trust and confidence you have placed in Commercial Electric
throughthe purchase of this Smart Outlet. We strive to continually create quality
productsdesigned to enhance your home. Visit us online to see our full line of
productsavailable for your home improvement needs. Thank you for choosing
CommercialElectric!
Item#1006368004
Model#HPKA315CWB

Package Contents (continued)
-5-
Installation
Turn power off at the circuit breaker or fuse for the outlet
that you are replacing.
1
Remove the old outlet by disconnecting all wires.
2
OFF
Part Description
a Power Socket 1
Power Socket 2
bIndicator Light /
Power Button 1
c
dIndicator Light /
Power Button 2
b
c
d
a

Installation (continued)
Connect the new outlet wires as follows.
3
-6-
Turn power ON at the circuit breaker or fuse.
Installation is complete.
5
Mount the outlet with the screws (C) and attach
Wall Plate (B).
4
Terminal screw
marked black
Hot (Black)
Terminal screw
marked Green
Terminal screw
marked White
Ground (Green)
Neutral (White)
C
B
NOTE:
□Use with copper wire only, 14AWG.

Operation
NOTE:
□
□
This Hubspace device requires a 2.4GHz Wi-Fi channel. Hubspace only shows Wi-Fi networks
that your device can use.
If you do not see your Wi-Fi network name when you attempt to connect your devices, please
check your router settings or move your product closer to your Wi-Fi router.
3Connect your outlet to power and follow the instructions
on the app screen.
1Download the Hubspace™ app from the App Store or
the Google Play Store.
2Create an account to sign in or log in if you already
have an account.
4Tap the ‘+’ button in the upper right corner to add your
outlet.
My Home
NOTE: Bluetooth access is required for device setup.
-7-

To turn both of your outlets on or off at the same time, tap the On/Off
button on the Home Page.
To control one outlet individually:
Tap the name of your Smart Outlet on the Hubspace Home Page to
display the control screen for each outlet, then you can:
a) Turn an outlet on or off.
b) Create schedules and set auto-off timers.
Besides app control, you are able to manually control the device and
turn them on/off with the button on the device.
Operation (continued)
6Using your Smart Outlet
□
□
□
5Scan the QR code on the outlet or in the Quick Start
Guide.
NOTE: If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code
and follow the instructions.
7Set up your Voice Assistant
You can connect your smart outlet to Google Home and Alexa from the
Hubspace app. Or, you can sign in to Alexa app or Google Home and
connect to your Hubspace devices from there.
-8-
HUBSPACE APP QUICK START GUIDE

LED Indicator
LED
State
Outlet
State
Meaning
Action To Take
Orange
Quick Blink Off
On
Off Off The outlet
is off. No action required.
Green On The outlet
is on.
Red Off
Orange On
Orange/Green
Quick Blink
Wi-Fi is not
connected.
There is a
WiFi error.
Specification
Go to the device settings in the
app and set up WiFi again. Check
that your WiFi Access Point is
allowing the device to join the
network.
-9-
Set up Wi-Fi for the product. If
you have already set up Wi-Fi for
this product, wait for it to
connect. Check the Hubspace app
for connectivity status.
minutes of receiving AC power,
the Orange Quick Blink
discontinues. You can still add the
device to WiFi at any time.

Input 120VAC, 60Hz
Output 120VAC, 60Hz,15A Maximum load,
Resistive
Network Wireless Type 2.4GHz, IEEE 802.11b/g/n
Operating Temperature 32° F(0°C)–104° F(40°C)
Operating Humidity 5-85% RH, Non-condensing
FCC, ETL
Certification
Specification (continued)
Troubleshooting
You can control any small appliances
(less than max load 1800W) in accordance
Problem Solution
What devices can be
controlled with the
Smart Outlet?
Make sure your device is connected to a
power source. Your Internet connection or
Wi-Fi network may be down.
Make sure you have a 2.4GHz capable
Wi-Fi network within range of the device
you are trying to add.
My Hubspace device
is not connecting to
Wi-Fi.
My device cannot nd
any Wi-Fi networks.
My device is in a location
that does not have Wi-Fi.
Can I still use it with the
Hubspace app?
Yes. Use the app on a phone with an
Internet connection like LTE. The phone
must be within Bluetooth range of your
Hubspace device and have Bluetooth
enabled.
-10-

I cannot nd the
QR code.
The QR code has become
damaged. How do I add
the device?
I lost my QR code. How
do I add a device?
1. Make sure the device is connected to
power.
2. In the Hubspace app, tap +, then Add
Device.
3. On the Scan Device screen, tap the
Search button in the lower right corner.
4. Follow the instructions on-screen.
It is on the outlet housing. A copy of the
QR code is also included in your device’s
documentation.
Under the QR code are numbers. You can
enter those in manually instead of
scanning the code.
A device is on another
account. How do I
transfer it?
Scan the QR code and it will transfer to
your account.
My device is of ine for
long periods of time.
Make sure your Wi-Fi signal strength is
suf cient. You may need to move your
router, use mesh Wi-Fi, or Wi-Fi extenders.
Can I scan the same QR
code to add multiple
products?
No. Each product has a unique QR code.
Problem Solution
The device is on and I
scanned the QR code,
but the app cannot
connect to it.
Turn off Bluetooth on your phone and turn
it back on. Then, scan the QR code. If the
problem persists, turn your phone off and
on, then try again.
Troubleshooting (continued)
-11-

Questions, problems, missing parts? Before returning to the store,
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-592-5233
Retain this manual for future use.
call Hubspace Customer Service
HOMEDEPOT.COM/Hubspace