CommScope NETpodium 1-1671610-1 User manual

NETpodium rack - bracket with spool (1-1671610-1)
INSTRUCTION SHEET 411-117008 FEB 2017 REV B
1. Kit content
Left bracket with spool 1 pc
Right bracket with spool 1 pc
Mounting hardware
2. Installing the brackets with screws and
Tool-less Fastener (TF)
-Insert the TF into the T-Channel
- Quarter turn clockwise
- TF is inserted in the T-channel, slide it to
6
th
hole, start counting from the top of the vertical profile
- Push, TF is FIXED, you can not slide it
- The bracket with spool can be slid with the slotted hole over
the fastener pin into the groove
-Insert the second TF into the T-Channel and fix in the second
hole beneath the first TF
For grounding assemble screw and washer in the T-channel
between the TF’s. Use an Allen key n°5 with conica l head
Bracket needs to be fixed with a torque of 3.5-4Nm
6
th
hole
Screw
TF

NETpodium rack - bracket with spool (1-1671610-1)
INSTRUCTION SHEET 411-117008 FEB 2017 REV B














3. Full F.O. cross-connect layout
- Leave three holes open and fix a TF to mount the second
bracket. Repeat the previous steps until you have installed 13
brackets with spool.
Layout for the position of the brackets:


























































































4. Remark: area to keep free
86,4 mm
40 mm1001 mm
-In case spools need to be located at another position. Be
aware that the indicated area’s need to be kept free. These
area’s are used for fixing side panels (1-1671578-1 / 1-
1671578-2).
Skip 3 holes
12 pcs of 1-1671610-1
12 pcs of 1-1671610-2
1 pc of
1
-
1671610
-
1
1 pc of
1-1671610-2
Keep area free !
Keep area free !
This product is covered by one or more U.S. patents or their foreign equivalents. For patents see, www.commscope.com/ProductPatent/ProductPatent.aspx
To obtain more information on CommScope® products, visit our website at http://www.commscope.com/SupportCenter/TechnicalSupport .aspx
©20 17 CommScope, Inc.
All Rights Reserved
Contact us:
Technical Support
Technical Assistance Center (TAC)
Greensboro, North Carolina
www.commscope.com
Tel: [phone]
Email: [email protected]
www.commscope.com/SupportCenter/TechnicalSupport.aspx