Community Commercial Design Series CP6 User manual

Commercial Design Series™
CP6 Pendant Loudspeaker
Installation Guide
CAUTION: Installation of loudspeaker should only be



Gripple®Manufacturer’s Recommendations and Important Notes
Gripple manufactures the speed clamps we provide with this product. To ensure
maximum safety, it is essential to follow their recommendations as listed herein
• For indoor use in a dry environment.
• Do not apply lubricant to any part of the assembly as this will alter the surface
of the cable, attracting dirt and debris to adhere and possibly reducing the load
capacity due to lubricant-induced slippage.
• Do not use on lifting applications; for static loads only.
• Do not use for loads outside the stated range of the product. The Gripple
wedges work by using the weight of the load to draw the wedge into the cable,
creating a secure grip. If used with too light a load, the wedge may not be able to
securely grip the cable.
• Do not exceed the Safe Working Load (SWL) of the product. Each product is
load rated and incorporates a minimum safety factor of 5:1. The SWL takes into

• The #2 Gripple products we supply have suitable minimum load and the maxi-

• Do not use on coated wire rope
coating on the length of cable to be inserted into the Gripple. It is important to
maintain the metal-to-metal contact between the locking wedges in the Gripple
and the cable.
• When applying paint or other coating, ensure that a dedicated Gripple decor
cover is used to cover the Gripple. This will ensure that the movement of the
locking wedges inside the assembly is not impaired. After painting, the Gripple
should not be repositioned on the cable.
• Do not use standard zinc galvanized Gripple products in chlorinated envi-
ronments. Use only Stainless Steel Gripple products in these environments.
CP6 suspension bracket
and input jack detail

   
Thread the plain ends of the main cable and
safety cables up through the loudspeaker top

Before inserting cables into the Gripples,

bracket atop the loudspeaker as shown in Figure
1. The main cable attaches to the center hole, and
the safety cable to either of the two outer holes
depending on the desired orientation. Make sure
the spring-loaded safety catch is positioned as
shown so it closes the loop to prevent accidental
detachment.
Note: Two 15-foot cable kits with Gripple
Speed Clamps are included; longer kits
are available as noted under the Optional

Hanging and Connecting the Loudspeaker
2
Snap-Hook Ends
Plain Cable Ends
3
1

with the pendant loudspeaker and connect to a
jack on the top of the loudspeaker As shown in
Figure 4. Thread the audio cable down through
the loudspeaker top cover, and then strip
approximately 1/4-inch (4mm) of insulation from
 Insert the wire
ends into the Euroblock plug terminals using the
proper polarity (marked on plugs and jack). If you
daisy chain an audio cable to the next loudspeaker,
bring it through the top cover as well and connect

plug. Secure all wires by tightening the screws in
the end of the Euroblock plugs.
4
5
Insert the Euroblock plug(s) into the jack atop
the loudspeaker as shown in Figure 5. No jumper
is necessary because the pairs of conductors in
the Euroblock jack are internally connected to
pass the signal through.
C
A
B
D
E
A
B
6

if necessary.
 Lift and support the loudspeaker with one
hand and then,

slack. The split cover plug is not yet pressed into
position in this photo.

from the cable tension when you allow the
loudspeaker to hang. Test by gradually lowering

When you have the proper height set, then take
up the slack on the safety cable by pulling its free
end. Since the loudspeaker is already supported

doing this.
CAUTION: DO NOT PULL THE
CABLES TO RAISE THE
LOUDSPEAKER. .
For clarity in Figure 3 we are not showing the
loudspeaker or its cover, but these should actu-

Figure 3 for the following steps:
 Beginning with the main support cable, insert

Loop the cable over (or through) the ceiling an-
chor point, thread the plain end back through the
Gripple and pull that cable end so that the loop is


located.

looping the cable over or through an indepen-
dent attachment point.
 Support the loudspeaker with your hand at the
desired height.

slack.
 


   
Once the loudspeaker is mounted correctly in
the ceiling, set the tap switch (inset above) to the
appropriate tap setting before any audio is passed
through the loudspeaker.
Do not change the setting on the
tap switch while the loudspeaker



If necessary, remove the loudspeaker grille to
gain access to the tap switch, which is located on

(red arrows and inset in Figure 9, yellow arrow
in Figure 10).
-
dium slot-blade screwdriver (not the one provid-
ed with the loudspeaker kit), or just press with
9
Loudspeaker Tap Setting

control dial on the front face of the loudspeaker



ten settings. The 8-ohm position is the same on
both sides and is for a low impedance connection.
On the lower-left side of the power tap control
shown in the close-up on Figure 8 are the power
values for 100-volt connections, and on the upper
right side are the power values for 70-volt con-
nections.
Note. The letters NC mean “no-connect” but
they do not actually break a connection. DO
NOT USE this setting if you’re using a 100-
volt distribution scheme as the loudspeaker
may draw excessive power; it corresponds to
the highest power that can be drawn with a
70-volt source.
This control makes it very easy and fast to balance
an installation since there is no need to open the
loudspeakers and move wires to different termi-
nals. Just be sure there is no applied signal when
you are actually changing the tap switch setting.
10
Note: It is best to begin with the loudspeaker lower
-
sition. It can be lowered later by using the Gripple

is to set the height primarily by raising the unit.
7

small bead of silicon sealant around the ridge
on the loudspeaker body where the top will
join it (Figure 8A). Slide the loudspeaker cover
into position so its four recessed holes align

loudspeaker (Figure 8B). Then insert the four
provided machine screws and fasten the cover.
Finally, press the split cover plug into place

may be necessary.
-

to install it.
8
C
A
B
To lower a loudspeaker which is already clamped

A. Insert the setting key into the small hole in the
bottom of the Gripple, which forces the internal
locking wedges open, and then,
B. Slide the cables to lower the loudspeaker.

in the safety cable, then support the loudspeaker
with your hand as you play out the main support
cable, lowering the loudspeaker to the desired
height. Finally remove the setting key to lock the
loudspeaker in place, and re-tension the safety
cable by pulling the loose end until it is snug.

   


Type of Paint
-
sure accept almost any type of latex or oil based
paint. We recommend application of two coats.
Caution: 
ensure that a dedicated Gripple decor cover is
used to cover the Gripple. This will ensure that
the movement of the locking wedges
inside the assembly is not impaired.

repositioned on the cable.
Painting Process
Follow this procedure to obtain the best results:
Painting the Loudspeaker
1. 
solvent such as mineral spirits, rubbing with a
lightly dampened cloth. Do not use abrasives
such as sandpaper or steel wool.
Caution: Use only light mineral spirits
thinner as a cleaner. NEVER use

paint thinner,
harsh detergents or other chemicals as they may
permanently damage the loudspeaker and some

 Mask the loudspeaker so that the surround,
cone and center area will not receive any paint.

in color) to avoid damaging the loudspeaker
surround when the tape is removed. We advise
against using conventional masking tape and

kinds of tape generally leave adhesive residue
-
ally cause damage.
3. After cleaning, apply two or more two thin
coats of either latex or oil-based paints. Latex
paint will adhere better if an oil-based primer is

or spray it on.
4. The grille should be painted separately, and
when it is not in place on the loudspeaker. We

internal cloth mesh, then spray paint the grille as-
sembly. Avoid using a roller or brush to paint the
grille as its metal perforated holes may become
clogged with paint, which degrades sound quality

internal cloth mesh (or if damaged install a new
cloth mesh).
Model Cone Size Size Weight
 


 mm tall)
8.1 lbs
(3.7 kg)
Sensitivity
(1 watt, 1m)

(-3 dB) Tap Switch Settings  
 

 

Optional Accessories
Conforms to UL1480 Standard

Cable kits with Gripple speed clamps meet the
following standards:
UL 1598 Luminaire Fittings and

CSA listing for Class 3426-01 (Canada) and

DIN 4102-2
Safety Agency Compliance
4001450
Additional Compliance Information
Suitable for use in air handling spaces per
NFPA70 National Electrical Code 2008 Article

Conditioning and Ventilation Systems 2009

SUITABLE FOR USE IN AIR HANDLING SPACES

Each includes a zinc galvanized steel
rigging cable with locking end loop and

Included with your pendant loudspeaker






(split plastic) tubing is available to dress
the hanger cables and electrical wiring.

and may be trimmed.

   
WARNING: To reduce the risk

expose this apparatus to rain or
moisture.
These servicing instructions are for use by quali-

-
ing other than that contained in the operating

The loudspeakers described in this manual are
-
mum acoustical performance using a variety of
rigging hardware, means, and methods in some
applications. It is essential that all installation
work involving the suspension of these loud-
speaker products be performed by competent,
knowledgeable persons who understand safe
rigging practices. Severe injury and/or loss of
life may occur if these products are improperly

installation for additional information.
Important Safety Instructions
Always follow these basic safety precautions
-
speakers and accessories:


• Heed all warnings.
• Follow all instructions, particularly those
pertaining to rigging, mounting, hanging and
electrical connections.




instruction.

radiators, heat registers, stoves, or other appa-

• Only use attachments/accessories that are


personnel. Servicing is required when the ap-
paratus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
The terms caution, warning, and danger may
be used in this manual to alert the reader to
important safety considerations. If you have any
questions or do not understand the meaning of
these terms, do not proceed with installation.
-
munity directly for assistance. These terms are

CAUTION: describes an operating condition or
user action that may expose the equipment or
user to potential damage or danger.
WARNING: describes an operating condition
or user action that will likely cause damage to
the equipment or injury to the user or to oth-
ers in the vicinity.
DANGER: describes an operating condition or
user action that will immediately damage the
equipment and/or be extremely dangerous or
life threatening to the user or to others in the
vicinity.
L’information de Sûreté Importante
PRECAUTION: Veuillez toujours suivrent ces

-

• Lisez et Gardez les instructions.
• Observez tous les avertissements.
• Suivez toutes les instructions, particuliere-
ment ceux concernant le calage, support,
montage et raccordements électriques.

• Nettoyez seulement avec un tissu sec.
• Ne pas bloquer les ouvertures de ventilation.
Installer conformément aux instructions du
fabricant.
• Ne pas installer près des sources de chaleur
comme les radiateurs, les cuisinières, foyers ou

qui peuvent produire de la chaleur.
• Utilisez seulement les accessoires qui sont



été endommagé de quelque façon, incluant le

endommagé, des liquides ont été renversés ou



été échappé.
Les termes attention, avertissement, et danger
peut être utilises dans ce manuel pour alerter le
lecteur aux considérations importantes de sûreté.
Si vous avez des questions ou ne comprenez pas

-


ATTENTION: décrit une condition de fonc-


dommages potentiels ou au danger.
AVERTISSEMENT: décrit une condition de

qui peuvent causer des dommages probable à

trouvant à proximité.
DANGER: décrit une condition de fonctionnement


extrêmement dangereuses et qui peut représenter

trouvant à proximité.
AVERTISSEMENT:
risque de feu ou de décharge élec-
trique, ne pas exposer cet appareil





autrement que ce qui est contenu dans les instruc-

pour le faire.
Les haut-parleurs décrits en ce manuel sont


en utilisant une série de differents matériaux,
moyens, et méthodes de calage dans certaines
applications. Il est essentiel que tout le travail

produits de haut-parleur soit effectué de facon
securitaire par des personnes compétentes et

blessures graves et/ou des pertes humaines
peuvent se produire si ces produits sont incor-
rectement installés. Veuillez lire la section sur le

supplémentaires.

Community Professional Loudspeakers


www.communitypro.com


9JAN2013
TRANSFERABLE WARRANTY “(LIMITED)”
VALID IN THE USA ONLY

-

complete warranty information within



Field Service Station.


number prior to the return of your product
for factory service.
WARRANTY INFORMATION AND SERVICE
FOR COUNTRIES OTHER THAN THE USA

available service locations for countries oth-
er than the United States of America, con-


SHIPPING DAMAGE
If the product is damaged during transit you

freight company. Be sure to save the carton
and packing materials, as damage claims
can be denied if these materials are not
Warranty Information and Service
retained. If evidence of physical damage
exists upon arrival, be cautious before sign-
ing a delivery acceptance receipt. Often,

a claim for damage or loss after you sign
it. Make sure that the number of cartons
shown on the freight documents have actu-
ally been delivered.
____________________________________
FIND THE LATEST ONLINE

http://www.communitypro.com
for the latest version of this manual and the
most recent product information.