Compaq 7020 User manual

User’s Guide
Compaq 7020 Flat Panel Monitor
Document Part Number: 254041-003
April 2002
Enhanced for accessibility

© 2002 Compaq Information Technologies Group, L.P.
Compaq, the Compaq logo are trademarks of Compaq Information
Technologies Group, L.P. in the United States and/or other countries.
Microsoft, MS-DOS, Windows, Windows NT are trademarks of Microsoft
Corporation in the United States and/or other countries.
All other product names mentioned herein may be trademarks of their
respective companies.
Compaq shall not be liable for technical or editorial errors or omissions
contained herein. The information in this document is provided “as is”
without warranty of any kind and is subject to change without notice. The
warranties for Compaq products are set forth in the express limited
warranty statements accompanying such products. Nothing herein should
be construed as constituting an additional warranty.
Compaq service tool software, including associated documentation, is the
property of and contains confidential technology of Compaq Computer
Corporation. Service customer is hereby licensed to use the software only
for activities directly relating to the delivery of, and only during the term
of, the applicable services delivered by Compaq or its authorized service
provider. Customer may not modify or reverse engineer, remove, or
transfer the software or make the software or any resultant diagnosis or
system management data available to other parties without Compaq’s or
its authorized service provider’s consent. Upon termination of the
services, customer will, at Compaq’s or its service provider’s option,
destroy or return the software and associated documentation in its
possession.
CAUTION: Text set off in this manner indicates that failure to
follow directions could result in damage to equipment or loss of
information.
WARNING: Text set off in this manner indicates that failure to
follow directions could result in bodily harm or loss of life.
User’s Guide
Third Edition (April 2002)
First Edition (July 2001)
Part Number: 254041-003

1
Installation
Unpacking
Before unpacking the monitor, prepare a suitable workspace for
your monitor and computer. You need a stable and clean surface
near a wall power outlet. Make sure that monitor has enough
space around it for sufficient airflow. Though the monitor uses
very little power, some ventilation is needed to ensure that the
monitor does not become too hot.
After you unpack the monitor box, make sure that the following
items were included in the box:
■ Monitor
■ 1.5M Monitor-to-PC VGA Cable
■ 2M Monitor-to-PC DVI-D Cable (digital models only)
■ 1.5M Stereo Jack Audio Cable (speaker models only)
■ 1.8M Power Cord
■ AC Adapter
■ User’s Guide
If you find that any of these items is missing or appears
damaged, contact your dealer immediately.
Compaq 7020 Flat Panel Monitor User’s Guide 1-1

Installation
Viewing Angle Adjustment
The monitor is designed to allow users to have a comfortable
viewing angle. The viewing angle can be adjusted as follows:
Top (-5°~ +35°) & Left / Right (-45° to +45°).
Figure 1-1
CAUTION: Do not force the monitor over its maximum
viewing angle settings as stated above. Attempting this will
result in damaging the monitor and monitor stand.
1-2 Compaq 7020 Flat Panel Monitor User’s Guide

Installation
Detaching Monitor from Its Stand
1. Remove the rear panel 1from the monitor. (see Fig. 1-2)
2. Remove the rear support panel 2from the swivel base
support column.
3. Unscrew screws
3the swivel base support column 4.
Figure 1-2
Compaq 7020 Flat Panel Monitor User’s Guide 1-3

Installation
Connecting the Display to the Swivel Base
Before connecting the display to the swivel base support column,
please refer to Fig.1-2.
The rear of this display has four integrated 4 mm, 0.7 pitch,
threaded holes, as well as four 5 mm access holes in the plastic
covering as illustrated in Figure 1-3. These specifications meet
the VESA Flat Panel Monitor Physical Mounting Interface
Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13
November 1997).
Figure 1-3
1-4 Compaq 7020 Flat Panel Monitor User’s Guide

Installation
Cable Installation
Please follow these instructions to install the cables.
1. Remove the back panel 1from the rear of the monitor.
(See Fig. 1-4).
2. Remove the rear support panel 2from the swivel base
support column.
3. Place the signal cable, the DC power cable and the audio
cable into their correct respective grooves 3.
Figure 1-4
Compaq 7020 Flat Panel Monitor User’s Guide 1-5

Installation
Connecting the Display to Your Computer
1. Power off your computer.
2. Connect one end of the signal cable to the monitor's VGA
port or DVI port (digital models only). (See Fig. 1-5)
3. Connect the other end of the signal cable to the VGA port
or DVI port on your PC.
4. Make sure both connections are secure.
Figure 1-5
WARNING: This device must be connected to an off-the-shelf
video cable in order to comply with FCC regulations. A ferrite-core
interface cable is included in the monitor package. This device will
not be in compliance with FCC regulations when a non-ferrite-core
video cable is used.
1-6 Compaq 7020 Flat Panel Monitor User’s Guide

Installation
Connecting the AC Power
1. Connect the power cord to the AC adapter. (See Fig. 1-6)
2. Connect the AC adapter's DC output connector to the DC
Power Jack of the monitor.
3. Connect the power cord to an AC power source.
Figure 1-6
WARNING: We recommend to install a "Surge Protector" device
between the AC Adapter and the electrical wall outlet for adding
protection against power surges to prevent the effects of sudden
voltage variations from reaching the monitor. Sudden power
surges may damage your monitor.
Compaq 7020 Flat Panel Monitor User’s Guide 1-7

Installation
Connecting the Audio Cable
The instructions in this section apply only to monitor models
featuring speakers.
1. Connect the audio cable to the " LINE OUT " jack on your
PC's audio card or to the front panel's "AUDIO OUT" jack
of your CD ROM drive. (See Fig. 1-7)
2. Connect the other end of the audio cable to the monitor's "
LINE IN " jack.
Figure 1-7
1-8 Compaq 7020 Flat Panel Monitor User’s Guide

Installation
Setting Up the Monitor
1. Make sure the AC Adapter is connected to the monitor.
2. Turn on the monitor's power switch, located on the bezel of
the monitor.
Power Management System
The monitor supports one low power mode. When the monitor is
in the low power mode, the monitor screen will be blank and the
power LED indicator will light amber.
Compaq 7020 Flat Panel Monitor User’s Guide 1-9

2
Display Controls
User Controls
The monitor features several function controls and indicators:
Figure 2-1
1 *Stereo Speakers PC Audio Stereo output.
2 External Headphone
Jack (speaker models
only)
The monitor speakers will be
disabled when using an external
headphone or external speakers.
3 Menu Button Press the menu button to view
the OSD (On Screen Display)
menu selection.
4 Adjustment Control
Buttons
Press the left button (-) to
decrease the OSD setting and
press the right button (+) to
increase the OSD setting.
Compaq 7020 Flat Panel Monitor User’s Guide 2-1

Display Controls
5 DC Power-On Indicator LED lights Green color - Power
is ON.
LED lights Amber - Monitor is in
“Power Saving Mode”.
LED is off - Power is OFF.
6 DC Power Switch Press the power switch to
switch the monitor ON/OFF.
7 *Speaker Volume Control Increase Volume - Turn the
knob clockwise.
Decrease Volume - Turn the
knob counter clockwise.
* Speaker models only
Adjusting the Monitor’s Display
This monitor features an "Intellectual-AUTO" function, which
stores up to 16 user settings. When new settings are made, this
function will check whether this setting has been Auto-adjusted
before. If so, this monitor will use those settings. If not, this
monitor will automatically start Auto-adjustment to obtain the
best viewing settings. The auto-adjustment process takes 3 ~ 5
seconds to complete during which a "Auto Adjusting..." message
will be shown on your screen.
The monitor has three function control keys among the functions
shown on the OSD menu, designed to create an easy user-
viewing environment.
OSD Function Menu
To access the OSD Main Menu, simply press the Menu button
on the front panel of the monitor, and the menu diagram will pop
up on the screen. Use the Adjustment Control buttons to scroll
through the menu items and press the Menu button again to
select an item. Once a menu control item is selected, press the
Adjustment Control Buttons to change the item to the desired
setting.
2-2 Compaq 7020 Flat Panel Monitor User’s Guide

Display Controls
The firmware may have been updated to a later version.
However, the version number shown on all OSD menus in this
guide will remain Ver. 1.00.
The following menus show the functions at each level:
OSD Menu
Main Menu Advanced Menu Menu Level 3
Brightness Adjustment Scale
Contrast Adjustment Scale
Image Control Auto Adjustment
Horizontal Image Position
Vertical Image Position
Clock
Clock Phase
Cancel
Save and Return
Adjustment Message
Adjustment Scale
Adjustment Scale
Adjustment Scale
Adjustment Scale
Color 9300 K
6500 K
Custom Color
Cancel
Save and Return
Custom Color Adjustment
Language Deutsch
English
Espanol
Francais
Italiano
Nederlands
Cancel
Save and Return
Compaq 7020 Flat Panel Monitor User’s Guide 2-3

Display Controls
OSD Menu
Main Menu Advanced Menu Menu Level 3
Management Power Saver
Power On Recall
Mode Display
Serial Number
Sleep Timer
Basic Menu
Cancel
Save and Return
On/Off Selection
On/Off Selection
On/Off Selection
Display serial number
Timer Set Menu
OSD Control Horizontal OSD Position
Vertical OSD Position
OSD Timeout
OSD Transparency
Cancel
Save and Return
Adjustment Scale
Adjustment Scale
Adjustment Scale
Adjustment Scale
Factory Reset Yes
No
Exit
2-4 Compaq 7020 Flat Panel Monitor User’s Guide

Display Controls
How to Adjust Settings
1. To launch the on-screen display menu, complete the
following:
❏ Basic Main Menu: To display the Basic Main Menu,
press the Menu button on the monitor front panel.
❏ Advanced Main Menu: Select “Advanced Menu” from
the Basic Main Menu to display the Advanced Main
Menu shown below.
Compaq 7020 Flat Panel Monitor User’s Guide 2-5

Display Controls
After the Advanced Main Menu has been selected, it remains the
default on-screen display each time the monitor is powered on
until the Basic Main Menu option is selected again.
2. To select an item from the Basic Main Menu, scroll down
and highlight an item by pressing the Minus (-) button
located on the monitor front panel. To reverse or back up,
press the Plus (+) button.
3. Highlight your choice and press the Menu button again.
4. Adjust the Advanced Main Menu displays using the same
procedure as the first level.
The advanced menus for Brightness and Contrast display an
adjustment screen. Use the Minus (-) button to decrease and the
Plus (+) button to increase the screen brightness and contrast.
5. Access the third level by selecting a function and pressing
the Menu button. Adjust the third level menu displays using
the same procedures as the second level.
6. To exit from the on-screen menu, select Exit from the
Advanced Main Menu. If the display is a second or third-
level menu, select Save and Return or Cancel, then select
Exit from the Advanced Main Menu.
Energy Saver Feature
When the monitor is in its normal operating mode, the monitor
utilizes less than 40 watts (50 watts with speakers) of power and
the Power LED is green.
The monitor also supports a reduced power state. The reduce power
state will be entered into if the monitor detects the absence
of either the horizontal sync signal and/or the vertical sync signal.
Upon detecting the absence of these signals, the monitor screen is
blanked, the backlight is turned off, and the Power LED is turned
2-6 Compaq 7020 Flat Panel Monitor User’s Guide

Display Controls
amber. When the monitor is in the reduced power state, the monitor
will utilize less than 5 watts of power. There is a brief warm up
period before the monitor will return to its normal operating mode.
Refer to your computer manual for instructions on setting energy
saver features (sometimes called power management features).
By selecting settings in the monitor’s Energy Saver utility, you
can also program the monitor to enter the reduced power state at
a predetermined time. When the monitor’s Energy Saver utility
causes the monitor to enter the reduced power state, the Power
LED blinks amber.
The following table describes the monitor energy saver levels
available during the different modes of operation.
Energy Saver Levels
Mode Power Usage Description
Full Power Less than 40 watts (50
watts with speakers)
ON = Normal operation
Power LED is green
Sleep Less than 5 watts Monitor screen is blanked.
Backlights are turned off.
Power LED turns amber.
There is a brief warm-up period
before returning to full power.
Programmable
Sleep
Less than 5 watts Monitor screen is blanked.
Backlights are turned off.
Power LED turns amber.
There is a brief warm-up period
before returning to full power.
Compaq 7020 Flat Panel Monitor User’s Guide 2-7

3
Technical Information
Monitor Specifications
Screen Size 17.0” (43 cm)
Display Type Active matrix color
TFT LCD
Resolution 1280 x 1024
Display Dot 1280 x (RGB) x 1024
Display Area (mm) 337.92 x 207.34 (HxV)
Lamp Voltage 720 Vrms (typical)
Lamp Current 6.0 mA rms. (typical)
Input Signal Analog RGB 0.7 Vp-p
Input Impedance 75 Ohm ± 2%
Polarity Positive
Amplitude 0 - 0.7 ± 0.05 Vp
Multi-mode Supported Horizontal Frequency:
30 - 80 KHz
Vertical Frequency:
56 - 75 Hz
Dimension (W x H x D) 424 x 436 x 178 mm
16.7” x 17.2” x 7.0”
Weight 6.5 kg
Compaq 7020 Flat Panel Monitor User’s Guide 3-1

Technical Information
Monitor Specifications
Power Input Voltage
Frequency 100 to 240V AC
50-60 Hz
Environmental
Considerations Operating temperature: 5°C to 40°C/41°F to 104°F
Humidity: 20% to 80% (non-condensing)
Storage temperature: -20°C to 60° C/-4°F to140° F
Humidity: 5% to 85% (non-condensing)
Power Consumption 40 W, 50 W with speakers
Preset Display Modes
Mode H. Freq.
(KHz) V. Freq.
(Hz) Pixel
Clock
(MHz)
Sync.
Polarity
(H/V)
VGA, 640 x 480 31.469 59.940 25.175 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VGA-Text, 720 x 400 31.469 70.087 28.322 -/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
Mac, 832 x 624 49.726 74.551 57.284 +/-
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
Mac, 1152 x 870 68.68 75.06 100.000 -/-
Sun, 1152 x 900 71.71 76.05 105.561 -/-
3-2 Compaq 7020 Flat Panel Monitor User’s Guide