Compaq P75 User manual

USER’SGUIDE
Compaq P75 Color Monitor
307809-001
Cover.p65 6/15/98, 5:07 PM1

Writer: Marianne Silvetti Saved by: Troy Witte Saved date: 11/12/97 3:31 PM
P
ages
: 1 W
o
r
ds
: 17
9
T
e
mpl
a
t
e
:
c
:
\
m
so
ffi
ce\
t
e
mpl
a
t
es\
n
o
rm
a
l.
do
t
The information in this guide is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE
LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR
OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE
FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.
This guide contains information protected by copyright. No part of
this guide may be photocopied or reproduced in any form without
prior written consent from Compaq Computer Corporation.
1997 Compaq Computer Corporation.
All rights reserved. Printed in the U.K.
Compaq, Deskpro, and QVision are registered in the U.S. Patent and
Trademark Office.
Microsoft, MS-DOS, Windows, Windows NT, and other names of
Microsoft products referenced herein are trademarks or registered
trademarks of Microsoft Corporation.
Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.
The software described in this guide is furnished under a license
agreement or nondisclosure agreement. The software may be used or
copied only in accordance with the terms of the agreement.
User’s Guide
Compaq P75 Color Monitor
First Edition (December 1997)
Part Number 307809-001
Compaq Computer Corporation
Notice

English 1-1
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
book 1
ENGLISH
Introduction The Compaq P75 Color Monitor is a microprocessor-based,
intelligent scanning monitor with an 0.25 mm aperture grille
pitch that supports resolutions up to 1280 × 1024.
Compaq P75 Color Monitor
Product Features The monitor features include the following:
■ 17-inch (16.0-in/40.6 cm viewable) aperture grille-based
CRT
■ Easy-to-access front panel controls to adjust screen
brightness and contrast
■ On-screen display in five different languages: English,
Dutch, French, German, and Spanish

1-2 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
■ Universal Serial Bus (USB) pass-through interface—plug
and play connectors for use with USB peripherals (mouse,
etc.)
■ Plug and play capability, if supported by your system
■ Special screen enhancement for use with motion video or
screen presentations
■ Tilt control (image rotation) functionality
■ Kodak Color Profile (included on diskette∗)
■ INF file which provides drivers for configuring your
Compaq monitor under Windows 95 (included on diskette∗)
■ Automatic scanning of all horizontal frequencies between
30 and 85 kHz, and vertical frequencies between 50 and
150 Hz
■ Supports VGA and Super VGA to 1280 × 1024 resolutions
■ Energy Saver feature that, when activated, results in a
power savings of greater than 94 percent
■ Macintosh-compatible timing with optional connector∗∗
■ Compliant with the following regulated specifications:
❏ EPA Energy Star
❏ European Union CE Directives
❏ Swedish MPR II 1990
❏ Swedish TCO 1995
Graphics Driver
This monitor may require a graphics driver (and/or .INF file)
that is compatible with your computer's graphics adapter.
Compaq has created a Universal Driver Manager (UDM)
release that supports all Compaq graphics adapters found on
Compaq Deskpro and Compaq Workstation products. The UDM
eases graphics driver deployment across Compaq platforms
ensuring cross-compatibility and backward-compatibility. The
resulting solution enables customers to manage and control
ongoing software maintenance costs. The UDM is available on
the Support Software CD for Compaq Desktop, Portable, and
∗The Kodak Color Profile and the INF file are included on the same diskette.
∗∗ A Macintosh-compatible connector is not supplied with this monitor.

English 1-3
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
Workstation Products and the Compaq World Wide Web site
(www.compaq.com).
■ You can order the Support Software CD for Compaq
Desktop, Portable, and Workstation Products. This compact
disc contains the latest device drivers, utilities, and
flashable ROM images needed to run MS-DOS, Microsoft
Windows 3.1, Windows 95, Windows NT workstation, and
IBM OS/2 on your Compaq commercial desktop product.
■ You can download the software from the Compaq World
Wide Web site (www.compaq.com).
■ You can purchase backup diskettes.
If you choose to purchase the Support Software CD, you have
two options:
■ You can purchase a single CD-ROM that gives you one-
time access to the latest support software (North America
only, Compaq part number 272505-001).
■ You can purchase a yearly subscription that delivers up to
12 monthly CD-ROMs (Compaq part number 183426-xxx).
The annual subscription ensures your continuous access to the
latest developments.
For help and service outside of the U.S. and Canada or to order
the CD or backup diskettes, contact your Compaq authorized
reseller, dealer, or service provider.
✎If you call Compaq to place an order, be sure to have the
serial number of your monitor available. The serial
number is located on the back of your monitor. This
number is necessary for all purchases.
Installing the
Monitor To install the monitor, ensure that the power to the monitor,
computer system, and other attached devices is turned off, then
follow these steps:
1. Place the monitor in a convenient, well-ventilated location
near your computer.

1-4 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
2. Connect the monitor signal cable to the 15-pin connector 1
on the rear panel of the computer. Tighten the screws on
the end of the connector.
IMPORTANT: Be sure the signal cable aligns with the 15-pin
connector. Do not force the cable onto the connector or you may
damage the signal cable.
3. Connect the monitor power cord 2underneath the back
panel of the monitor, then plug the other end of the cord
into an electrical outlet that is easily accessible and close to
the monitor.
!WARNING: To reduce the risk of electrical shock or damage
to your equipment, do not disable the power cord grounding
feature. This equipment is designed to be connected to a
grounded (earthed) power outlet that is easily accessible to
the operator. The grounding plug is an important safety
feature.
CAUTION: Be sure that the power outlet you plug your power
cord into is easily accessible and located as close to the
equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the
power cord from the power outlet.

English 1-5
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
USB Connectors
The base of the monitor has two Universal Serial Bus (USB)
connectors. Use USB connector ❶to connect the USB signal
cable∗to the computer. Use USB Connector ❷to connect USB
compatible plug and play devices such as a keyboard, mouse, or
joystick if supported by your computer. This feature provides
USB pass-through and does not support USB host requirements.
CAUTION: This USB connector is not designed for use with high
speed USB devices such as a video camera, scanner, etc.
Compaq recommends connecting high speed devices directly to
the computer.
✎These USB connectors operate as a pass-through system. Your
computer must have a USB host controller installed for any
USB-connected devices to operate.
CAUTION: To prevent deterioration of signal transfer or
malfunction of USB devices, USB cables should not exceed the
combined length of 9.75 feet (3 meters). This length includes both
the USB signal cable and the USB peripheral cable.
∗A USB signal cable is not supplied with this monitor.

1-6 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
Operating the
Monitor
Front Control Panel
No./ Icon Control Function
1Contrast Adjusts contrast by turning control to left or
right.
2Brightness Adjusts brightness by turning control to left or
right.
3Select button 1. Launches on-screen display.
2. Selects function adjustments.
3. Exits menus and on-screen display.
4−Minus button Selects and adjusts the functions.
5+Plus button Selects and adjusts the functions.
6Power switch Turns the monitor on and off.
7Power LED 1. Green indicates monitor is turned on.
2. Yellow indicates suspend mode.
3. Amber indicates sleep mode.

English 1-7
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
On-Screen Display Settings
The adjustments for screen settings are located in the on-screen
display and can be viewed in one of five available languages.
The on-screen Main Menu displays the following ten functions:
Size and Position Adjusts width, height, and horizontal and vertical
positions of the screen.
Geometry Adjusts pincushion, pincushion balance, trapezoid,
parallelogram, and tilt.
Overscan Zooms in and enlarges a selected portion of the screen.
Color Displays the following selections for screen color
temperature: 9300°K; 6500°K; Custom
Color/Enhancement Color; and Convergence.
Enhancement Enhances screen for screen presentations or viewing
motion video applications.
Moiré Minimizes irregular or wavy lines on the screen raster.
Degauss Corrects image distortion or color impurity caused by
external magnetic fields.
Language Lists the following five language selections for on-
screen display: English, Dutch, French, German, and
Spanish.
Management Adjusts power saver and mode display, displays
monitor serial number and master reset option (resets
all modes to factory settings).
Factory Reset Resets the screen (operating mode only) to its factory
settings.

1-8 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
How to Adjust Settings
To launch the on-screen display Main Menu:
1. Press the Select button 1on the monitor front panel to
display the Main Menu on the monitor screen.
2. To make a selection from the Main Menu, scroll down by
pressing the Minus (-) button 2and reverse or back up by
pressing the Plus (+) button ❸located on the monitor front
panel.
3. Highlight your choice and press the Select button 1again.
For example, if your selection is Size and Position, press the
Minus button 2until Size and Position is highlighted, then
press the Select button 1to choose it.
Monitor with On-Screen Display
4. A second level menu displays with expanded menu items.
Again, to make a selection, press the Minus (-) button 2to
scroll down or press the Plus (+) button 3to reverse or
back up.

English 1-9
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
IMPORTANT: The Overscan and Degauss selections do not
display menus. When you select Overscan, the choices are to
turn it on or off. When you select Degauss, the monitor corrects
color impurities on the screen. The monitor screen
automatically degausses when the monitor is turned on.
5. Highlight your choice and select Save and Return, or to
advance to the third level menu, highlight your choice and
press the Select button. To void any changes made, select
Cancel instead of Save and Return.
6. The third level displays a sizing window for adjusting the
selected function. To adjust, press the Minus button to
decrease the degree of adjustment, or press the Plus button
to increase the degree of adjustment.
7. Press the Select button after the adjustment is made.
IMPORTANT: Selections under the Management Menu, Power
Saver and Mode Display, turn on and off at the third level. The
Serial No. selection displays the monitor serial number at the
third level.
8. To save the new adjustment, select Save and Return and
press the Select button.
9. Select
Exit from the Main Menu and press the Select
button again to exit the on-screen display.
✎Until an actual change is made in a third level display, the
Save and Return control is inactive.
✎Selecting Cancel exits the on-screen display without saving the
new adjustments.

1-10 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
Adjusting the Enhancement Feature
The Enhancement feature has preset levels of brightness,
contrast, color, and sharpness for use when making screen
presentations or viewing motion videos.
The Enhancement second-level menu displays three selections:
❏ Normal - for regular screen use
❏ Presentation - for screen presentations
❏ Video - for viewing motion videos
To make adjustments to the Enhancement feature, follow the
steps under the section “How to Adjust Settings” on page 1-8.
If further adjustments to the color temperature are needed after
selecting Presentation or Video modes, complete the following
steps:
1. Select
Color
from the Main Menu.
2. Select
Enhancement Color from the second menu.
3. Use the Plus (+) or Minus (-) buttons on the front panel to
adjust the Enhancement color scale from 9300K to
11000K.
4. Select Save and Return when finished.
Presentation and Video modes are not suggested for regular
screen use. Screen text appears blurred using either of these two
modes.
✎The Enhancement mode resets to the Normal setting
when the monitor is turned off.

English 1-11
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
Adjusting Picture Quality
The optimum screen settings are factory preset. However, to
change the settings to your personal preference, complete the
following steps. Allow the monitor to warm up for 30 minutes
before performing the following procedures. The picture image
stabilizes after a warm-up period.
Optimizing Contrast
For best results, set your screen to a light background (such as
the Windows Desktop) before adjusting the following settings:
1. Set the brightness control to its maximum setting, then
reduce the brightness to your preference.
2. Adjust the contrast setting to your preference.
Optimizing Focus
The default image size is preset at the factory. The front panel
controls can be used to increase the screen size beyond the
default setting. However, expanding the screen image beyond
the default settings may degrade the focus at the outer edge of
the screen.
To enhance focus, use the lowest brightness level that gives
satisfactory results in your viewing environment.
✎Settings that maximize contrast may not offer optimum focus,
and settings that maximize focus may not offer optimum contrast.

1-12 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
Display Resolutions
The display resolutions listed below are the most commonly
used modes and are set as factory defaults. The monitor
automatically recognizes these preset modes when they are
requested by a software program and will provide the user with
a properly sized and centered display.
Display Resolutions
Preset Modes Resolutions
1. VGA Compatible 640 × 350 at 31.5 kHz/70 Hz
2. VGA Compatible 640 × 480 at 31.5 kHz/60 Hz
3. VESA Standard 640 × 480 at 37.5 kHz/75 Hz
4. VESA Standard 640 × 480 at 43.3 kHz/85 Hz
5. VGA Compatible 720 × 400 at 31.5 kHz/70 Hz
6. VESA Standard 800 × 600 at 37.8 kHz/60 Hz
7. VESA Standard 800 × 600 at 46.9 kHz/75 Hz
8. VESA Standard 800 × 600 at 53.7 kHz/85 Hz
9. Macintosh Compatible 832 × 624 at 49.72 kHz/74.5 Hz
10. VESA Standard 1024 × 768 at 48.4 kHz/60 Hz
11. VESA Standard 1024 × 768 at 60.0 kHz/75 Hz
12. VESA Standard 1024 × 768 at 68.7 kHz/85 Hz
13. Macintosh Compatible 1152 × 870 at 68.7 kHz/75 Hz
14. VESA Standard 1280 × 1024 at 63.9 kHz/60 Hz
15. VESA Standard 1280 × 1024 at 80.0 kHz/75 Hz
✎Memory channels 9 and 13 are Macintosh-compatible display
modes for use with a Macintosh-compatible computer. If your
computer has this requirement, you will need to purchase a
special adapter connector to attach to the monitor signal cable.
User Modes
The video controller signal may occasionally call for a mode
that is not preset if:
■ You are not using a Compaq standard graphics adapter.
■ You are not using a preset mode.

English 1-13
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
If this occurs, you may need to readjust the size and centering
of the monitor screen by using the on-screen display. User
changes can be made to any or all of these modes and saved in
memory. The monitor automatically stores the new setting, then
automatically recognizes the new mode just as it does a preset
mode. In addition to the 15 preset modes that can be changed
and stored, there are 15 user modes that can be entered and
stored.
To revert back to the factory default settings, select "Reset"
from the "Factory Reset" menu in the on-screen display, and the
factory default resolutions will replace the user changes made
for the operating original display mode.
Energy Saver Feature
The monitor has an energy saver feature that allows the
computer to control the monitor power consumption. The
energy saver feature combines hardware and software
components and puts the monitor into a reduced power state
when it is not in use.
There are three different modes of operation:
■ Full power mode
■ Standby/Suspend mode
■ Sleep mode
Full power mode is the normal mode of operation. The monitor
goes into the suspend mode after a user-selectable period of
keyboard and mouse inactivity. Sleep mode, which results in a
power savings of over 94 percent, activates after a second user-
selectable period of keyboard and mouse inactivity. By
selecting settings in the computer's Energy Saver utility, you are
able to determine the length of the inactivity period before the
monitor goes into suspend or sleep mode.

1-14 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
The following table describes the monitor energy saver levels
available during the different modes of operation.
Energy Saver Levels
Mode Power Usage Description
Full Power Less than
115 watts ON = Normal operation Power LED is green.
Standby/Suspend Less than
15 watts Monitor screen blanks. High voltage is off. Heater voltage is on. Power LED
turns yellow. Full power mode returns
quickly.
Sleep Less than
8 watts Monitor screen blanks. High voltage is off. Heater voltage is off. Power LED
turns amber. There is a brief warm-up
period before returning to full power
mode.
✎The energy saver features for monitors only work when the
monitor is connected to a computer that has energy saver
features.
The Energy Saver utility, with its energy saver features, is
available under the Windows environment, and some features
are available under the DOS environment. Refer to your
computer manual for instructions on setting energy saver
features (sometimes referred to as power management features).

English 1-15
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
Care and
Maintenance This section explains how to care for and maintain your
Compaq monitor during normal everyday use.
Protecting the Monitor
To protect your monitor from overheating and other types of
damage, follow these suggestions:
■ Place the monitor at least 4 inches (10 cm) away from the
wall.
■ Use only a power source and connection appropriate for
this monitor, as indicated on the marking label/back plate.
■ If an extension cord or power strip is used, make sure that
the cord or strip is rated for the product and that the total
ampere ratings of all products plugged into the extension
cord or power strip do not exceed 80% of the extension cord
or strip ampere ratings limit.
■ Do not overload an electrical outlet, power strip, or
convenience receptacle. The overall system load must not
exceed 80% of the branch circuit rating. If power strips are
used, the load should not exceed 80% of the power strip
input rating.
■ Install the monitor near an outlet that you can easily reach.
Disconnect the product by grasping the plug firmly and
pulling it from the outlet. Never disconnect the monitor by
pulling the cord.
■ Turn the monitor off when not using it. You can substan-
tially increase the life expectancy of the monitor by using a
screen saver program and turning off the monitor when it is
not in use.
■ Unplug the monitor from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
■ Slots and openings in the cabinet are provided for
ventilation. These openings must not be blocked or covered.
Never push objects of any kind into cabinet slots or other
openings.
■ Do not place plants on top of the monitor. Water or dirt
from the plant may fall into the vents.
■ Do not drop the monitor or place it on an unstable surface.

1-16 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
■ Do not allow anything to rest on the power cord. Do not
walk on the cord.
■ Keep the monitor in a well-ventilated area, away from
excessive light, heat, and moisture. Keep the monitor away
from high capacity transformers, electric motors, and other
strong magnetic fields.
■ In a two-monitor system, place the monitors as far apart
from each other as possible to lessen interference between
them.
■ Do not open the monitor cabinet or attempt to service this
product yourself. Adjust only those controls that are
covered
by the operating instructions. If the monitor is not operating
properly or has been dropped or damaged, contact your
Compaq authorized dealer, reseller, or service provider.
Cleaning the Monitor
To clean the monitor, follow these steps:
1. Turn off the monitor and the computer.
2. Dust the monitor by wiping the screen and the cabinet with
a soft, clean cloth.
If the screen requires additional cleaning, use an antistatic CRT
screen cleaner.
CAUTION: Do not use benzene, thinner, ammonia, or any volatile
substances to clean the monitor or the screen. These chemicals
may damage the cabinet finish and the screen.
Shipping the Monitor
Keep the original packing box in a storage area. You may need
it later if you move or ship your monitor.

English 1-17
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
appendix
AGENCY REGULATORY NOTICES
Federal
Communications
Commission Notice
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and the
receiver.
■ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
■ Consult the dealer or an experienced radio or television
technician for help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly
approved by Compaq Computer Corporation may void the
user's authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables
with metallic RFI/EMI connector hoods to maintain compliance
with FCC Rules and Regulations.

1-18 English
Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 06/15/98 5:31 PM
Pages: 23 Words: 4300 Template: c:\msoffice\templates\working\comm.dot
File Name Bk1ap_en.doc Part Number 307809-001
Declaration of Conformity for Products
Marked with the FCC Logo—United States Only
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation. For questions regarding this declaration,
contact:
❏ Compaq Computer Corporation
P.O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or call:
❏ [phone]
To identify this product, refer to the Series number found on the
product.
Canadian Notice
This Class B digital apparatus meets all requirements of the
Canadian Interference—Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
German Ergonomics Notice
Compaq Computers, when tested with the Compaq Series 625
monitors, were evaluated and found compliant to the
requirements of ZH 1/618 (German Safety Regulations for
Display Work Places in the Office Sector).
EPA Energy Star Compliance
Monitors that are marked with the Energy Star Logo meet the
requirements of the EPA Energy Star program. As an Energy
Star Partner, Compaq Computer Corporation has determined
that this product meets the Energy Star guidelines for energy
efficiency. Specific details on using the Energy Saving features
can be found in the energy saver or power management section
of the computer manual.