Comtrend Corporation GS-7260 User manual

Page 1
Quick Start Guide
GS-7260| 5-Port Gigabit IGMP Switch
Understanding your IGMP Switch
This switch contains LEDs to show the activities and status of the ports, including power LED and Link/ Act LEDs.
Please refer to the front panel of the switch for the positions of the LEDs :
Look at the following table for the description of the LEDs:
LED Status Operation
Power
Steady Green The switch is powered on
Off The switch is powered off
Link/ ACT
1-5
Steady Green 1000Mbps connected
Amber 10/100Mbps connected
Blinking Sending or receiving
Off Port disconnected or link fail
Rear Panel
Basic Setup
(Note: This switch only supports IGMP v1 & v2)
1. Connect the A/C power adapter to a power outlet, then connect it to the Power Socket of the switch.
The power LED turns on when the switch is receiving power.
2. Connect your xDSL / cable modem to Port 1 of the switch by Ethernet cable.
3. Connect your computers and network devices (Ex. Set-Top-Box, DVR, etc.) to any available port on the switch.
A
Ethernet Ports
Power
Socket
B

Page 2
Optional Wall Mounting Instructions
Troubleshooting
The following information should help you diagnose basic setup or installation problems.
1) POWER Indicator is OFF: If the Power LED goes off, please make sure that your power outlet is working properly
(perhaps by testing with another device).Then plug in your GS-7260 again. If the Power Indicator does not light up,
please contact your equipment supplier for further information.
2) NETWORK LED is OFF: If a LAN LED fails to light up, check that the LAN port of the Switch is connected firmly to the
LAN port of the other device. To check the condition of the Ethernet cable, use another cable to test the same
connection.
Congratulations, you are done!
FOR MORE HELP: For instructions on advanced features, FAQ, etc., please visit our online Product Webpage:
http://us.comtrend.com/products/public/product/home-networking/gs-7260.html
For more information:
Facebook: https://facebook.com/Comtrend
Website: http://us.comtrend.com/
Support: Visit our website or call 1-877-COMTREND (1-877-266-8736)
C
D
Port 1*
Step 3
Step 2
Step 1
*Make sure xDSL/Cable modem
is connected to Port 1.
E