Conair Thinner User manual

Scales for the way you live®
Instructions
for use of
Thinner®
Bathroom Scales
Congratulations! By purchasing this
Thinner scale, you’ve made the first step
toward taking control of your weight.
To get the greatest benefit from your
purchase, please read this entire
brochure before using your scale.

Before using this product, remove the battery tab by opening
battery compartment and carefully pulling the plastic tab from
underneath the battery then close the battery compartment.
The tab is no longer needed and can be discarded.
1. Scale Performance:
Scale start:
Tap on for weight and weight tracker measurement
2.1 To measure weight only:
• Operate the scale on a secure flat floor.
• Choose pounds (lb), kilograms (kg) by switching the
convertible switch.
• Tap the scale in standby mode. Full display is illuminated.
• Then “0.0” appears.
(Kg version) (Lb version)
• Step on the scale and stand still.
• “000” blinks, and then your weight appears.
(kg version) (Lb version)

• Step off Scale and it will shut off in 10 seconds automati-
cally. If you stay on the scale for a long time, then the scale
will shut off in 15 seconds automatically.
2.2 Personal data setting mode:
Note: In this mode, if scale is not keyed for 30 seconds,
scale will turn off automatically.
2.2.1 Set User ID
Tap on the scale and wait until “0.0” appears; press Set button,
default “P-1” will appear and blinks
• Use the Up/Down button to select a user number, once
the desired user number (P-1 to P-10) appears, press “SET”
button to confirm.
2.2.2 Setting Start Weight:
• Then “0.0” appears. Step on the scale. Start weight
indicated by start weight symbol “ ” appears.
• Press “SET” button to confirm.

2.2.3 Setting Goal Weight:
• Scale automatically calculates goal weight as 10% off
the start weight. Goal weight indicated by goal weight
symbol “ ” appears.
• Press “SET” button to confirm or press “UP/DOWN”
button to change the goal weight if necessary, once the
desired goal weight is reached, press “SET” button to
confirm.
• Once the personal data setting is set, display runs
through data storage.
• User number, start weight and goal weight displays for 2
seconds each and then “0.0” appears. Step on the scale
and stand still to simply start weight tracking before the
scale turns off. The scale will turn off automatically when
no longer in use.
2.3 Weight Tracking measurement:
2.3.1 Operate the scale on a secure flat floor. Make sure the con-
vertible switch is in the desired position Kg or Lb. Tap on
the scale and wait until “0.0” appears.

2.3.2 Press “USER” key repeatedly until you get the correct user
number.
2.3.3 Data appears (Start weight displays for 2 seconds, goal
weight displays for 2 sec) and the scale then displays “0.0”.
2.3.4 Step on the scale. Your current weight displays for
3 seconds.
• Current weight stays. Last weight indicated by last
weight symbol “ ” and delta last (the difference
between current weight and last weight) indicated by
symbol “ ”display for 3 seconds.

• Current weight stays. Start weight indicated by symbol “
” and delta start (the difference between current weight and
start weight) indicated by symbol “ ”display for 3 seconds.
• Current weight stays. Goal weight indicated by goal
symbol “ ” and delta goal (the difference between
current weight and goal weight) indicated by symbol “ ”
display for 3 seconds.
• Scale turns off automatically.
NOTE:
1. When the scale traps zero error, “Err” will show. Please try
again.
2. If the value of delta last or delta start or delta goal is over
-99.9 (KG revision) or -99.8 (LB revision), “Err” will show.
3. If you step on the scale before “0.0” appears, the scale will not
function properly.
4. Low Battery Warning: “Lo”

©2008 Conair Corporation, East Windsor, NJ 08520, Glendale, AZ 85307 Made in China 08PL011 IB-8264
Power Supply
This scale requires (1) 3V lithium battery.
The battery compartment is located on the back of the scale platform.
LIMITED TEN YEAR WARRANTY
Conair will repair or replace, at our option, your appliance free of
charge for 120 months from the date of purchase if the appliance is
defective in workmanship or materials.
To obtain service under this warranty, return the defective product to
the service center nearest you, together with your sales slip and $5.00
for postage and handling. California residents need only provide proof
of purchase and should call 1-800-3-CONAIR for shipping instructions.
In the absence of a receipt, the warranty period shall be 120 months
from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED IN DURATION TO THE 120-MONTH DURATION
OF THIS WARRANTY. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitations may not apply
to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH
OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER. Some states do not allow the exclusion or limitation of
special, incidental, or consequential damages, so the above limitation
may not apply to you. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state.
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
1-800-767-6020
www.conair.com