Concept Pro CP-HSD20-IP User manual

IP HIGH SPEED DOME SERIES QUICK START GUIDE
CP-HSD20/30-IP
IP PTZ
QUICK START GUIDE

IP HIGH SPEED DOME SERIES QUICK START GUIDE
1WHAT’S IN THE BOX?
Packaging Contents
Speed Dome Camera x1 9-Pin Terminal Block x 1 Quick Start Guide x1
Bracket x1 Anchor Bolt x 4 Screwdriver x1
Hex Key x 1 Mounting Template x 1 User Manual USB x1
Gloves x1
2INSTALLATION
Install the Speed Dome Camera in 3 Steps
1. Use the mounting template sheet to drill holes in the mounting surface, then ax
the included bracket to the surface
2. Connect the safety lanyard between the camera and bracket, then connect all
required cables to the camera
3. Twist the camera into the bracket and tighten the xing screws.
3WALL MOUNT INSTALLATION
1. Drill holes and ax wall bracket to surface and pass cable through to junction box
2. Congure DIP switches for ID, baud rate, video output then twist on dome and
secure to wall bracket
3. Attach all cables to junction box and tighten all xing screws

IP HIGH SPEED DOME SERIES QUICK START GUIDE
4CONFIGURING THE CAMERA
Camera Connections
3
Alarm Input Terminal Block
1BNC 1 CVBS Output
2
Network Connection
4
Alarm Output Terminal Block
5
6
DC 12V/ AC 24V Power Input
RS-485 Connector
Camera Setting Set Switch
8
Address ID Set Switch
7
9
DC12V Output
CablingBNC1
1
2
3
4
Speaker
Mic.
ALARM INPUT
GND1 2 3 4 5 6 7 8
COM
In 1
In 8
OUT1 OUT2 OUT3 OUT4
5
6
8
7
9
BNC2
1. VIDEO OUTPUT
BNC1: Analogue (CVBS) Output.
2. Address ID Switch
1 2 3 4 5 6 7 8
ON
ON
OFF
ON
ON
ON
ON
OFF
OFF
OFF
---
OFF
ON
ON
OFF
ON
ON
OFF
ON
OFF
---
OFF
OFF
OFF
ON
ON
ON
ON
ON
OFF
---
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
ON
---
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
---
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
---
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
---
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
1
---
2
3
5
7
4
255
6
8
-
1
12345678
2
D I P
4 8 1 6 3 2 6 4 128Va l I D
Factory default
switch positions
Speed dome ID is set using
standard binary notation
1 2 4 8 16 32 65 128
Note: ID 0 should not be used. Where multiple speed domes
are connected, a unique ID must be assigned to each one.

IP HIGH SPEED DOME SERIES QUICK START GUIDE
5CONNECTING VIA INTERNET EXPLORER
How to connect and operate the camera via IE
1
Login Information
Default IP Address:
http://192.168.12.100
User Name: admin
Password: admin
This product supports Internet
Explorer 8 and higher.
Please login
Language:
Uusername:
Password:
English
LoginClear
Please downlosd plug-inDownlosd
2
Download Plug-in
Click “Download” to download plug-in.
Please refer to the user manual page 15-16 for additional details.
Note: If the plug-in could not be successfully installed, one possibility
is that the operating system and the browser are not compatible. For
example, if the operation system is 64 bits, but the browser is 32 bits, then
the 32-bit plug-in will need to be installed.
4CONFIGURING THE CAMERA
Camera Connections
3. SET SWITCHES
DIP No. 1 and 2 congures the baud rate as follows:
1 2 3 4 5 6 7 8
ON
OFF
ON
OFF
Factory default
switch positions
NO.1
OFF
OFF
ON
NO.2
2400
4800
9600
Rat e
Switch No. 5:
ON: NTSC OFF: PAL
Switch No. 6:
ON: 30FPS (Default)
Switch No. 7: Not Used
Switch No. 8:
RS485 matching resistance switch (120Ω). Default setting is OFF.

IP HIGH SPEED DOME SERIES QUICK START GUIDE
5HOW TO OPERATE ON IE WEB PAGE
How to connect and operate the camera via IE
3
Changing
Camera
Settings
• Using the cameras web browser it
is possible to congure the IP PTZ
camera with ease. From changing
stream settings to adjusting the
image settings or even applying pri-
vacy masks using the click and drag
function. All the network settings
associated with a network camera
for example; sending emails, taking
snapshots of live images, device
information, IP settings, rmware
version, and maintenance options
can be congured.
• When applying settings to the CP-
HSD10/20/30-IP, only use the web
browser for conguring image qual-
ity settings and any other settings
within the camera options. While
the IP camera supports RS485 with
access to the OSD menu (via preset
95), when editing the camera from
the OSD menu the settings may not
change, therefore synchronisation is
not possible using the web browser.
However, when changes are made
from the web browser these are
synchronised to the OSD menu.
I
I
P
PCamera Web Service
Alarm Out
Listen Talk Snapshot Record Streaming PlayerMode
2017 05 15 02:30:26 Tues
PTZ >>
1
Type:
Name:
2 3 4
PTZ
Call Setup
15
PTZ
Zoom
+
Focus
+
IRIS +
1280x1024 7793 Kbps 25 fps
314 / 0/ x0
3D Wipers Light
Setup
Exit
V iew
Preset
Preset1
Strram1 Real time first
R e s t o r e p a no r a m a
O r i g i n a l
A d a p ti v e
F u ll s c r ee n
4
Connect to NVR
To connect this product to an NVR, please make sure the NVR and PTZ
are on the same network segment.
NVR
Monitor

IP HIGH SPEED DOME SERIES QUICK START GUIDE
5HOW TO OPERATE ON IE WEB PAGE
How to connect and operate the camera via IE
5
Input/Output
This product supports audio in/out, analogue CVBS output, and up to
64GB Micro SD card.
Audio in GND Audio out
Speaker Mic.
6
Power Supply
Only use recommended power supply adapters with this camera.
AC24VDC12VPoE++(Oponal)

IP HIGH SPEED DOME SERIES QUICK START GUIDE
NOTES

IP HIGH SPEED DOME SERIES QUICK START GUIDE