Concept Pro CVP9324DNIR-HDA-3MP User manual

USER MANUAL
CVP9324DNIR-HDA-3MP
External Dome Camera
CVP9324DNIR-HDA-3MP

CAUTION
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Installation should be made by a qualified service person and should adhere to all local
codes.
In order to prevent electric shock and avoid damage to waterproof seals, do not loosen
any screws on the camera body.
Adjust the sunshield to avoid exposing the lens to direct sunlight.
Do not touch the front glass. If necessary, use a soft cloth to wipe off dust or debris.
Do not install on a surface subjected to frequent vibration or shocks.
Do not operate the camera beyond its temperature range or power ratings.
Should any damage or suspected damage occur, shutdown and disconnect the power and
contact your service provider.
Do not install the camera under unstable lighting conditions. Severe lighting change or
flicker can cause the camera to work improperly.
Never use the camera close to a gas or oil leak.
Do not disassemble the camera.
Do not drop the camera or subject the unit to physical shocks
Do not point the camera directly at strong light, this can damage the sensor.
Ensure all removable covers are replaced to protect the inner components.
Do not install near devices which emit a strong electro-magnetic field.
Use a dry or damp cloth only for cleaning.
Note: Changes or modifications not expressly approved by the manufacturer can
cause the camera to be damaged and become inoperable. This may invalidate the
user warranty.
PLEASE FOLLOW THE ABOVE PRECAUTIONS – FAILURE TO DO SO MAY
INVALIDATE THE WARRANTY OR CAUSE SERIOUS INJURY.

PACKING CONTENTS
Important: Ensure all precautionary procedures are
observed during installation.
It is recommended the camera is tested under the most
demanding environmental conditions such as low light
or bright sunlight to ensure continuity of effective CCTV
monitoring.
lUsing the supplied fitting screws, securely attach the
camera to the drilled surface
lAdjust the tri-axis gimbal and zoom/focus to give the
required image of the area to be monitored.
lReplace the dome cover by pushing firmly in place
onto the base
lCarefully clean the dome surface with a soft lint
free cloth
lRemove the camera carefully from the box, keeping
the accessories in a safe place
lUse the supplied mounting template to mark the
space for drilling
lRemove the dome cover using a suitable coin or
screwdriver
FIXING TO A WALL
INSTALLATION
Wall Plugs
X4
Conduit hole cover
opener
X1
Mounting Template
X1
Fitting Screws
X4
Dome cover
screwdriver
X1
Weatherproof
sealing washers
X8
Weatherproof
sealing pad
X1

INSTALLATION
TRI-AXIS GIMBAL
360º
90º
360º
CONNECTION
lConnect the video out port to your video cable
running to the monitor / recorder
lCheck the power supply is of the correct level
and connect your power supply into the power
port on the Camera.
lView the picture on a monitoring device to
check the power and video connection is
working properly.
PSU
Troubleshooting
lEnsure all power and cable connections are correct with the Camera and DVR.
lIf all power and cable connections are correct and the camera picture can not be
produced then contact your supplier for technical support.
lTo assist in installation when using an
analogue test monitor, the camera can
be switched to an analogue output by
pushing the joystick fully up for
several seconds.
lThe camera can be returned to AHD
output by pushing the joystick fully
left for several seconds, or TVI output
by pushing it right for a few seconds.

OSD Controller
ON SCREEN DISPLAY (OSD)
Remove the dome cover and locate the OSD control buttons on the camera mainboard.
Press and hold LEFT for 5 seconds to switch the camera to AHD.
Press and hold RIGHT for 5 seconds to switch the camera to TVI.
Press and hold UP for 5 seconds to switch the camera to CVBS or Analogue.
Press and hold DOWN for 5 seconds to switch the camera to CVI.
2MP cameras will be set to AHD by default. 3MP cameras will be set to TVI by default.
Press and hold UP for 5
seconds. This will switch to
a 960H ready output.
Press and hold LEFT for 5
seconds. This will switch to
the 1080p AHD output.
UP
RIGHT
MENU / ENTER
DOWN
LEFT

ON SCREEN DISPLAY (OSD)
MAIN MENU
AE
WB
DAY-NIGHT
VIDEO SETTING
LANGUAGE:
RESET
SAVE-EXIT
EXIT
⏎
⏎
⏎
⏎
ENGLISH, CHINESE, SPANISH, KOREAN, ITALIAN
⏎
⏎
VIDEO SETTING
CONTRAST:
SHARPNESS:
COLOR GAIN:
DNR:
IMAGE SIZE:
FORMAT:
RETURN
1-50
1-20
1-31
1-15
3MP, 2MP
PAL, NTSC
⏎
DAY / NIGHT
MODE:
RETURN
EXT, AUTO, COLOR, B/W
⏎
WB
MODE:
RGAIN
(MODE = MWB):
BGAIN
(MODE = MWB):
RETURN
ATW, MWB
⏎
EXPOSURE
BRIGHTNESS:
EXPOSURE MODE:
LV (EXPOSURE
MODE = BLC):
GAIN:
RETURN
1-20
GLOBE, CENTER, BLC, FLC
1-16
⏎
0-7
1-16
1-16

SPECIFICATION
MODEL
SENSOR
SENSOR RESOLUTION
SIGNAL SYSTEM
SCANNING SYSTEM
SYNC. MODE
FRAME RATE
LED COUNT/TYPE
IR EFFECTIVE DISTANCE
EFFECTIVE RESOLUTION
MIN. ILLUMINATION (LED OFF)
MIN. ILLUMINATION (LED ON)
LENS
FOV
DAY & NIGHT
WIDE DYNAMIC RANGE
S/N RATIO
ELECTRONIC SHUTTER
WHITE BALANCE
GAIN
AE MODES
DIGITAL NOISE REDUCTION
PRIVACY MASKING
MOTION DETECTION
VIDEO OUTPUT
TRANSMISSION RANGE
CVP9324DNIR-HDA-3MP
1/3" CMOS
3MP (2048x1536)
PAL/NTSC
PROGRESSIVE
Internal
18fps @ 2048x1536 (TVI)
25fps @ 1920x1080 (AHD/TVI/CVI)
25fps @ 960H (CVBS)
21pcs IR LED
Up to 20m
2048(H)x1536(V)
0.001 lux (AGC ON)
0 lux
f=2.8~12mm Varifocal Lens
90° ~ 35°
ICR (AUTO, COLOUR, B&W, EXT)
D-WDR (ON/OFF)
≥50dB
1/25 ~ 1/50,000s
ATW/MANUAL (1~16)
LEVEL 0~16
FLC/BLC/GLOBE/CENTER
2D DNR (1~15)
NO (AVAILABLE THROUGH DVR)
NO (AVAILABLE THROUGH DVR)
1.0Vpp, 75 OHM BNC, 4 in 1 (AHD/TVI/CVI/CVBS)
>300m via 75-5 coaxial cable

SPECIFICATION
MODEL
UP THE COAX CONTROL
SUPPLY VOLTAGE
POWER CONSUMPTION (MAX)
OPERATING TEMPERATURE
OPERATING HUMIDITY
DIMENSIONS
WEIGHT
CERTIFICATIONS
CVP9324DNIR-HDA-3MP
YES
DC12V/AC24V/AC24V
4.5W
-10°C ~ 55°C
0% ~ 85% RH
Φ149 x 107mm
950g
IP66/CE/FCC
1/3" CMOS
3MP (2048x1536)
PAL/NTSC
PROGRESSIVE
Internal
18fps @ 2048x1536 (TVI)
25fps @ 1920x1080 (AHD/TVI/CVI)
25fps @ 960H (CVBS)
21pcs IR LED
Up to 20m
2048(H)x1536(V)
0.001 lux (AGC ON)
0 lux
f=2.8~12mm Varifocal Lens
90° ~ 35°
ICR (AUTO, COLOUR, B&W, EXT)
D-WDR (ON/OFF)
≥50dB
1/25 ~ 1/50,000s
ATW/MANUAL (1~16)
LEVEL 0~16
FLC/BLC/GLOBE/CENTER
2D DNR (1~15)
NO (AVAILABLE THROUGH DVR)
NO (AVAILABLE THROUGH DVR)
1.0Vpp, 75 OHM BNC, 4 in 1 (AHD/TVI/CVI/CVBS)
>300m via 75-5 coaxial cable

DIMENSIONS
5236
95
149
46.00
83
105

NOTES

NOTES

OCTOBER 17 Design and specification are subject to change without notice.