Concept2 D Use and care manual

TOOLS
1. 2.
5. 6.
3. 4.
9/16” or 14mm
0615
Loosen 4 screws. Do not remove.
AXLE & SPROCKET REPLACEMENT – MODEL D & E
concept2.com
Loosen only.

concept2.com Page 2 0615
AXLE & SPROCKET REPLACEMENT – MODEL D & E
7. Note: For Model D proceed to step 13.
For Model E proceed to step 8.
8.
11. 12.
9. 10.
14.13.
Remove 2 screws
Loosen only.
Remove
Remove
5 screws
A
B
Model E only.
Model E only. Model E only.
Model E only.
Model E only.

concept2.com Page 3 0615
AXLE & SPROCKET REPLACEMENT – MODEL D & E
15. 16.
19. 20.
17. 18.
22.21.
Remove old axle and replace with new axle.
If you are not replacing the
sprocket, proceed to step 21.
Remove old sprocket
and replace with new
sprocket.
For replacing sprocket only,
follow steps 19 & 20.

concept2.com Page 4 0615
AXLE & SPROCKET REPLACEMENT – MODEL D & E
26.
24. 25.
29.28.
On reassembly, push
housing into place.
27.
23.
Tighten
5 screws
A
To reassemble Model D follow steps 23-36,
omitting steps 27-31.
To reassemble Model E follow steps 23-36.
B
Model E only.
Model E only. Model E only.

concept2.com Page 5 0615
AXLE & SPROCKET REPLACEMENT – MODEL D & E
30. 31.
34. 35.
32. 33.
36.
Tighten
Replace
Tighten 2 screws
Tighten 4 screws.
Tighten.
Model E only. Model E only.