Concept2 ROWERG User manual

Not to scale
1
BOX 2
WITH TALL LEGS
BOX 1
Weight: 68 lb (31 kg)
Dimensions: 8 ft x 2 ft (244 cm x 61 cm)
Space Required for use: 9 ft x 4 ft (274 cm x 122 cm)
Weight Capacity: 500 lb (227 kg) as tested by Concept2*
*300 lb (135 kg) as tested per European Stationary Fitness
Equipment Testing Standard EN 20957-7
Questions? Comments? Problems?
Contact Concept2 directly at 800.245.5676 (US and Canada)
Or visit us online: concept2.com
Concept2, Inc. 105 Industrial Park Drive Morrisville, Vermont USA 05661 concept2.com/contact
PN 2453
PN 7109
PN 2960
ASSEMBLY INSTRUCTIONS
ROWERG WITH TALL LEGS ASSEMBLY - PAGE 2
TALL LEGS RETROFIT - PAGE 4
Not to scale
x 8
3/4” (1.9 cm)
PN 2233
T-27 DRIVER
PN 2230 x 4
5/8” (1.58 cm)
PN 2395
*
x 4
PN 2394
*
*Two PN 2395 and two PN 2394 will be used for RowErg Assembly.
*Four PN 2395 and four PN 2394 will be used for Tall Legs Retrofit.
RowErg Assembly & Tall Legs Retrofit
RowErg Assembly
x 1
3.25” (8.26 cm)
PN 1224 PN 7099
x 1
Knob
PN 7101
DEVICE HOLDER PARTS
0621

RowErg with Tall Legs Assembly Instructions
2
+ =
from step 3
34
56
IMPORTANT
Two screws and
two nuts will be
reinstalled in step 6.
WITH TALL LEGS ASSEMBLY INSTRUCTIONS
12
(4) 3/4” (1.9 cm)
PN 2233
(4) 3/4” (1.9 cm)
PN 2233
reuse in step 4
from step 3
from step 3
(2) 5/8” (1.58 cm)
PN 2395
(2) PN 2394
ASSEMBLY TIP
Do not fully
tighten screws
until all screws
are in place.

3
7
WITH TALL LEGS ASSEMBLY INSTRUCTIONS
How to Use the Device Holder
insert
device
Pinch and
release to
remove
device.
Loosen knob
to slide lower
bracket up or
down.
Important:
Tighten knob
when device
is in place.
PN 1224
PN 7101
PN 7099

4Tall Legs Retrot Instructions
TALL LEGS RETROFIT INSTRUCTIONS (Refer to page 1, “Box 2” for parts list)
3
2
(4) 3/4” (1.9 cm)
PN 2233
(4) 3/4” (1.9 cm)
PN 2233
4
56
1
ASSEMBLY TIP
Do not fully
tighten screws
until all screws
are in place.
7/16” Socket Wrench
Not Included
*reuse in
step 4
X
X = do not reuse
X
X
*
X
X
ASSEMBLY TIP
Do not fully
tighten screws
until all screws
are in place.
(4) 5/8” (1.58 cm)
PN 2395
(4) PN 2394
X
+ =
from step 1