CONSET 501-27 Operational manual

327990.1
Product data sheet:
Electric height adjustable desk frame 501-27

2
Product data sheet: Electric height adjustable desk frame 501
-
27
Table of contents
Packing details page 3
Main measures and specifications page 4
Tabletop drillings page 5
Assembly and use page 6
Safety and tests page 7
Specification, components page

3
Product data sheet: Electric height adjustable desk frame 501
-
27
Packing details

Product data sheet: Electric height adjustable desk frame 501
-
27
Main measures and s ecifications

5
Product data sheet: Electric height adjustable desk frame 501
-
27
Tableto drillings

6
Product data sheet: Electric height adjustable desk frame 501
-
27
Assembly and use
Along with all products a “Direction for assembly and use” is delivered. In this you will find a detailed
description of the way of assembly.
After the frame has been mounted the chosen tabletop is mounted and the operation unit will be
possible to fix at the bottom side of the tabletop. This operation unit has two rocker switches.
With push switch A and rocker switch B it is possible to move the tabletop up and down and can be
stopped at all levels. For safety reasons it is necessary to push both buttons at the same time for
moving the table up and down.
The desk frame has a safety feature. If the moving parts of the desk frame meet an obstacle in the
down-going motion, the desk frame will stop. The pressure given before stopping is equal to the
weight of the tabletop and the articles placed on the tabletop.
A
B

7
Product data sheet: Electric height adjustable desk frame 501
-
27
Safety and tests
All products have been tested up against the following norms:
ISO/DIS 8019
DS/ISO 7172
The norms mention above is possible to find at the website in the section “Norms and approvals”.
DECLARATION OF CONFORMITY
We hereby declare, under our sole responsibility that the following products:
-ConSet sit and stand tables product type 501-27
which are covered by this statement, are in conformity with the following standards and other normative
documents::
-Counsel Directive 9 /37/EF
-Counsel Directive 9/336/EØF with later changes
-Counsel Directive 73/23/EØF with later changes
With reference to the Machinery Directive (9 /37/EF) please be aware:
-the sit and stand table is considered a machine and
-the sit and stand table may not be used until it has been assembled and installed according to the
instructions.”.

8
Product data sheet: Electric height adjustable desk frame 501
-
27
Com onent s ecifications
Metal sheet parts: St 37-2
Gear parts: St 70-2
Gear motor: CS no. 115720
Power supply: 0 W AC Power Transformer
Input 100-240 VAC ~ 50/60Hz
Consumption: 0 Watts; Standby: Less than 1 Watt
Plastic components: PA6, POM, PE-HD
Surface treatment Visible metal parts powder coated in ”alu” colour, RAL9006
and black, RAL 9004
Non visible metal parts are surface treated (e.g. plated)