Contec CM-32L Operator's manual

Ver.1.00
CM-32L, CM-64L １
Signal monitor Accessory for Digital I/O
CM-32L, CM-64L
Left : CM-32M, Right : CM-64M
Specifications, color and design of the products are subject to change
without notice.
Model Number of I/O channels Facilities for
additional functions
CM-32L 32 None
CM-64L 64
STB input
ACK output
This product is a Signal Monitor for a CONTEC Digital I/O
board/card. This product can monitor the status of the
connected signal line or generates pseudo signals onto the
signal line to debug programs and check their behavior.
- Signal monitoring LED provide for every point.
- Capable of generating switch-operated signals for all points.
- Capable of checking digital I/O board/card operation without
any external device connected.
- Capable of checking operation of an independent external
device.
- Capable of supplying external power from this product if
connected to an insulated digital I/O board/card.
- Mountable on a 35-mm DIN rail using the DIN rail mounting
adapter “DIN-ADP1” (separately priced).
Item CM-32L CM-64L
Number of I/O channels 32 64
Number signal
monitoring LEDs
32 64
Number of
pseudo-signal switches
32 64
External power
supply*1
12 - 24VDC
(depending on the board/card
connected)
12 - 24VDC
(depending on the board
connected)
Connector used CN1, CN2:
37 pin D-SUB connector
[Female]
DCLC-J37SAF-20L9 [mfd. by
JAE, Female] equivalent
Screw lock #4-40UNC
CN3:
MC 1,5/ 3-G-3,5
[mfd. by PHOENIX
CONTACT] equivalent
CN1, CN2:
PCR-E96LMD [mfd. by
HONDA]
CN3:
MC 1,5/ 3-G-3,5
[mfd. by PHOENIX
CONTACT] equivalent
Operating Conditions 0 - 50ºC, 20 - 90%RH (No condensation)
Physical Dimensions (mm) 105(W) x 230(D) x 35(H)
Weight 200g 260g
Facilities for additional
functions
None STB input, ACK output
*1: When the product is connected with a digital I/O board/card with an integrated power
supply, no external power supply is required if the product uses that internal power supply.
No external power supply is required when the product is connected with a non-isolated
digital I/O board/card.
DIN rail Mounting Adapter for Accessories : DIN-ADP1
AC adaptor (Input: 100VAC, Output: 12VDC 1A) :POA201-10-2
Accessories
Specifications
Features

Ver.1.00
CM-32L, CM-64L ２
-
- Body(One of the following) …1
- User’s Guide (this document) …1
[CM-32L, CM-64L]
- External power supply connector…1
CAUTION
The option cable is not appended to the interface board/card and this
product. Cable differs according to board/card used. Be sure to
check the manual or visit the CONTEC’s Web site to buy an
appropriate one.
Packing List
Physical Dimensions
Internal Circuit

Ver.1.00
CM-32L, CM-64L ３
CN1, CN2
CN3
When the product is connected to an insulated digital I/O board/card,
the CN3 can supply external power to it (for all common terminals).
When using the external power supply, please connect with external
power supply connector (Appended goods) and install to CN3.
When using the optional AC adaptor [POA201-10-2], please connect
directly to the CN3.
CAUTION
- If the connected digital I/O board has and uses an internal power supply, do
not use any external power supply.
- If this product is connected to an uninsulated digital I/O board/card, do not
connect any external power supply.
(1) Connect the interface board/card and the product using the
separately available option cable.
(2) Connect an external device and an external power supply
to this product as required.
CM-32L CM-32(PC)E
External power
supply
12 - 24VDC 5 - 24VDC
Shape of CN3 MC 1,5/ 3-G-3,5
[mfd. by PHOENIX CONTACT]
equivalent
※External power supply connector
is appended
M3 screw-type terminals.
Pin assignment
of CN3
Unconnection, - , + +, -
Weight 200g 230g
CM-64L CM-64(PC)E
External power
supply
12 - 24VDC 5 - 24VDC
Shape of CN3 MC 1,5/ 3-G-3,5
[mfd. by PHOENIX CONTACT]
equivalent
※External power supply connector
is appended
M3 screw-type terminals.
Pin assignment
of CN3
Unconnection, - , + +, -
Weight 260g 320g
Difference point with CM-32(PC)E or CM-64(PC)E
Connections
Wiring Diagram