Continental Refrigerator PC Series User manual

www.continental-industry.com
Continental
PC Series SHOP-IN-A-BOX
Removing Box Panels Instructions
4 5
The screws to remove are
marked with black arrows on
the front, back, and side panels.
2To remove the bolts in the
side panels use a wrench with
1/2 inch socket.
3
Use a drill with the screw bit
supplied in the lifting instruc-
tions bag.
1
Remove bolts and screws from (1) side panel then
work your way in a clockwise matter removing
screws/bolts from one panel at a time. Note: 2
persons are require to remove the box panels.
Next, follow the lifting instructions on
the back of the page.

www.continental-industry.com
Continental
PC Series SHOP-IN-A-BOX
Lifting Instructions
Unwrap your new Continental SHOPINABOX
and cut the plastic bands from the table and skid.
Remove Hose Reel Rack and Tooling Boxes.
6The SHOPINABOX should be lifted from the
skid with a fork lift. Insert the forks from the
back of the table. (The Lift Points are labeled).
Note: Use extreme caution not to damage any
components.
7
Remove the skid and position the SHOPINABOX
in the desired work area.
8Note: The table’s feet can be adjusted.