Contour RollerMouse Red User manual

User Guide

RollerMouse Red user manual
Box Contents
1. RollerMouse Red
2. Two short keyboard risers
3. Two long keyboard risers
4. Wrist rest
5. Wrist rest removal key
1
2 3
/1
4
5

RollerMouse Red user manual
RollerMouse Functions
A. Rollerbar
B. Cursor speed adjustment and LED
C. Copy
D. Paste
E. Left-click
F. Right-click
G. Scroll wheel
H. “One Touch” double-click
For additional mouse features and specic
Mac settings, please download our driver at
support.contourdesign.com
/2

RollerMouse Red user manual
Keyboard Positioning
Before plugging in the unit, take a moment to check the height and angle of
your keyboard, and nd the arrangement that’s most comfortable for you.
Use the risers to achieve the correct angle and height regardless of the type
of keyboard you are using. The spacebar on your keyboard should come just
above your rollerbar. To achieve a proper ergonomic position, the front edge of
the keyboard should be as close as possible to the rollerbar.
Contour Design’s Balance Keyboard is a perfect option for the RollerMouse Red.
Designed specically for the RollerMouse, the Balance Keyboard sits level with
the rollerbar and can be easily adjusted to a positive, neutral, or negative tilt.
Positive Tilt
Neutral TiltNegative Tilt
/3

RollerMouse Red user manual
Line up the short and long risers and then
press the two parts together until you hear them snap into place.
Inserting the Keyboard Risers
Fit the end of the riser into the slot on the back of
the RollerMouse Red.
2
2 3
/4
Adjusting Risers
2
23
Negative Tilt
Neutral Elevated
Neutral Flat
Positive Tilt

RollerMouse Red user manual
Connecting to a computer
Plug the RollerMouse Red USB cable into the computer’s USB port.
Allow your computer a few seconds to automatically install.
Using the rollerbar
A
The rollerbar provides two functions:
· Pressing down on the rollerbar performs a left click.
· Moving the rollerbar from side to side and up and down
performs cursor movement.
/5
A

RollerMouse Red user manual /6
Rollerbar click force adjustment
Click force refers to how hard or soft it is to click the Rollerbar.
To change the click force, press and hold both the and the
button for two seconds, the LED light will show current click
force setting. While continuing to hold button release button
and use scroll wheel to change click force setting. Let go of
to select click force setting.
Note: The Rollerbar click function can be turned o using the above
adjustment method, by moving the scroll wheel until all LEDs are lit.
E
E B
G
B
E
B
G
E
The rollerbar provides two functions:
· Pressing down on the rollerbar performs a left click.
· Moving the rollerbar from side to side and up and down
performs cursor movement.
Click volume adjustment
To change the click volume setting, press and hold both the
and the button for two seconds, the LED light will show
current click volume setting. While continuing to hold button
release button and use scroll wheel to adjust
volume setting. Let go of to select click volume setting.
Note: The Rollerbar click volume can be turned o using the above
adjustment method, by moving the scroll wheel until all LEDs are lit.
F B
B G
F
F
B
G
F

RollerMouse Red user manual
Change cursor speed
Press the Cursor Speed button to cycle through cursor speeds. There
are ten speed selections which range from slow (600 DPI) to fast (2800 DPI).
Speed can be identied by the LED lights as shown.
/7
600 DPI 800 DPI 1000 DPI 1200DPI 1400DPI
B
B
1600 DPI 1800 DPI 2000 DPI 2400DPI 2800DPI

RollerMouse Red user manual
600 DPI 800 DPI 1000 DPI 1200DPI 1400DPI
1600 DPI 1800 DPI 2000 DPI 2400DPI 2800DPI
For illustrated information on these modes please
visit support.contourdesign.com
Different Mode Settings
PC - Mode
MAC - Mode
HID - Mode
LED’s light up from
left to right
LED’s light up from
right to left
LED’s light up from
both sides towards
the middle
Windows
OS
Linux
• Press and hold the and buttons simultaneously for two seconds
to see the LED lights flash for the respective mode.
•
• Release both buttons once the desired mode has been reached.
While holding the button, release the button and click on the
button to toggle though the different modes.
RollerMouse Red has 3 modes. PC-Mode, Mac-Mode and HID-ode.
The default setting on your RollerMouse, is PC-Mode. Use the following key
commands to switch settings to best t your operating system.
B
C
B
B
C
C
C
/9
Operating system

RollerMouse Red user manual /8
Changing the ‘Double’ Click button to ‘Middle’ But-
ton Function
To change from double click function to a middle button
function, hold the cursor speed button and the double click button
for two seconds until LEDs ash to conrm. Repeating this process will reverrt
back to double click function.
B H
B
H
Wrist rest
We recommend that you use the wrist rest , however, if for any
reason you would like to remove the wrist rest, lift the front edge of
the RollerMouse and rest it in your hand. Fit the wrist rest removal
key into the slot at the end of the unit and twist the key.
To install the wrist rest after removal, snap it into the slot on the
front edge of your RollerMouse Red.
4
5